Filter by
Pipe Size
DFARS Compliance
Thread Type
Hydraulic Tanks
Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.
Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.
Breather vents prevent excess pressure in tanks and allow a free flow of air. To install the breather vent to Style C tanks, drill a hole in the tank.
For technical drawings and 3-D models, click on a part number.
A
C
Replacement Gasket
Replacement Cover
O'all | Drain Connection—NPT | Inlet/Outlet Connection—NPT | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap., gal. | Lg. | Wd. | Ht. | Pipe Size  | Dash Size | No. of Ports | Pipe Size | Dash Size | No. of Ports | Fasteners Included | No. of Holes | Hole Dia. | Max. Temp., °F | Each | |
Steel Tanks | ||||||||||||||||
Dual Chamber | ||||||||||||||||
| A | 5 | 16" | 10" | 14" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 0000000 |
| A | 10 | 20" | 12" | 17 1/2" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 000000 |
| C | 20 | 26" | 16" | 15 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 30 | 26" | 16" | 21 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 40 | 38 1/4" | 24" | 14" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| C | 60 | 42 3/8" | 30" | 16 5/8" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 00000000 |
| C | 100 | 50 3/8" | 30" | 19" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 00000000 |
| Replacement Neoprene Rubber Gasket for 62945K42 and 62945K43 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Steel Cover for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 0000 |
| Replacement Steel Cover for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 00000 |
Pipe Suction Flanges
Mounting Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Cutout Dia. | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Lg. | Wd. | Includes | Each | |
| 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 000000 |
| 3/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
Flange-Mount Breather Vents
Material | Strainer | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Cap | Strainer | Gasket | Removes Particle Size Down To, microns | Cap Dia. | Flange Dia. | Dia. | Ht. | Mounting Fasteners Included | Lg. | Wd. | Bolt Circle Dia. | Each | |
| 2 1/8" | Zinc-Plated Steel | Plastic | Rubber | 40 | 3" | 3 1/4" | 1 7/8" | 3 13/16" | Yes | 1/4" | 3/16" | 2 7/8" | 00000000 | 000000 |
Level Indicators for Style A Tanks
Through-Wall Mount
Thread | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Gender | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temperature Range | Material | Fitting Material | Window Material | Includes | Each | |
| 1/2"-20 | UNF | Male | 6" | 7 5/8" | 4 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 000000 |
| 1/2"-20 | UNF | Male | 9" | 10 5/8" | 7 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 00000 |
Level and Temperature Indicators for Styles B and C Tanks
Nylon Plastic With Steel Guard
For Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | No. of | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temp. Range | Thermometer Temp. Range | Material | Guard Material | Window Material | Each | |
| 1/2" | 2 | 5" | 6 3/8" | 3 7/8" | 13/16" | 1/2" | 50 psi @ 70° F | -40° F to 210° F | 0° F to 220° F | Nylon Plastic | Steel | Nylon Plastic | 0000000 | 000000 |