We will reply to your message within an hour.
More
Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.
Lighter than standard EPDM water hose, this PVC/Buna-N hose connects to a male threaded fitting on one end and a female one on the other.
With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.
To prevent breaking down from contact with oil, animal fats, and grease as you wash down equipment with hot water, this hose is covered in blended rubber. It comes with fittings already attached, so it’s easy to connect to a washdown station and wash gun.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.
The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.
Designed for areas where space is limited, these reels have the smallest overall size of all our reels.
Protect your hose when it’s not in use.
Turn the handle to rewind the hose.
Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.
Made of PVC, this hose stays flexible in temperatures as low as -65° F.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Create a retracting air line that meets your needs.
Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.
Supply air to two power tools without worrying about your lines getting tangled.
Safely deliver compressed air to brakes in semitrucks, trailers, and other vehicles with this D.O.T. certified hose. Made of flexible nylon, it will bounce back to its coiled form even after long periods of use.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
Use this neoprene hose in temperatures up to 210° F.
Hose is PVC, so it’s light and easy to handle.
Made of polyurethane, this hose stands up to the wear and tear of daily use.
Instead of a rubber cover, this hose has a stainless steel braid for excellent strength in high-pressure applications.
Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.
Made of nylon with a polyurethane cover, this hose is half the weight but 240 times better at resisting wear and tear than our standard rubber hydraulic hose. The male threaded fittings come already attached to save you time.
For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.
The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. To save you time, it comes with male threaded fittings already attached.
To handle rapid changes in pressure and flow without bursting, this hose is reinforced with four steel wire spirals. It comes with male threaded fittings already attached, so it's ready to use right out of the box.
Transfer industrial gases in temperatures up to 1500° F with this hose.
Commonly used to transfer gasoline, this hose is also known as curb pump hose.
The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.
To maintain the temperature of liquids as cold as -325° F, this hose has vacuum insulation and a reflective barrier. This prevents heat transfer in the same way a thermos does, so the exterior of the hose won’t freeze or form condensation. Thread the fittings on this hose onto a freezer or other equipment in your plant or laboratory.
Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.
Metal hose fittings have better durability than plastic barbed hose fittings.
Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.
Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.
Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.
The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
Use these fittings with power washer guns and in other high-pressure water supply applications.
Connect these fittings to air tools for pneumatic applications.
The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.
Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.
Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.
Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.
Compatible with ARO-shape plugs and sockets.
With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.
Compatible with Lincoln-shape plugs and sockets.
Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.
Compatible with Japanese-shape plugs and sockets.
Compatible with Schrader-shape plugs and sockets.
Compatible with Ring-Lock-shape plugs and sockets.
Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.
Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.
Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.
Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.
Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.
Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.
Also known as Chicago and universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.
These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.
Use these CGA fittings to connect welding hose to pressure regulators and torches.
Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut to make a threaded connection.
Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.
Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.
Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.
Made of stainless steel, these hose fittings are more durable than plastic barbed hose fittings and have excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.
Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.
Each of these metal fittings is double bagged to prevent contamination in areas that require a high level of cleanliness.
Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.
Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.
Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.
Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.
To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.
Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.
Also known as dry disconnects and double shut-off couplings, these couplings make connecting and disconnecting your line quick and virtually spill-free. Built to stand up to petroleum products, such as diesel fuel and gasoline, their body and gasket are made from materials that won’t corrode from oil.
Access your line without twisting the hose—these unions separate into three pieces.
Built with ball bearings, these fittings continuously swivel 360° before and after installation to prevent your hose from twisting, kinking, and failing. They’re made of 316 stainless steel, so they won’t corrode from a wide variety of chemicals, as well as fuels, gasoline, and oil.
Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated.
Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.
Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.
With just a vise and a wrench, make or repair hose assemblies in the field.
Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.
Use these couplings at pressures up to 10,000 psi. The plug and socket thread together to form a stronger connection than other quick-disconnect couplings. They are compatible with High-Pressure Thread-Lock-shape plugs and sockets.
Add quick connection points for mechanical gauges and other diagnostic equipment to your line. These couplings are also known as test ports and diagnostic couplings.
Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.
Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.
A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. Slide the beaded end into hose and secure with a clamp. Use in coolant applications up to 300 psi.
Couplings consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are designed for coolant applications up to 200 psi. Also known as coolant-line mold couplings.
Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.
Use these barbed fittings in low-pressure steam applications up to 150 psi. Slide the barbed end into hose and secure with a clamp.
Couplings consist of a plug and a socket that connect quickly. Use them if you need frequent access to a line. They are designed for low-pressure steam applications up to 300 psi.
Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.
These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.
Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.
These fittings are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Secure barbed ends into plastic or rubber hose with a clamp.
To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF, also known as Kynar.
Connect these fittings to fire hydrants and washdown equipment.
The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.
The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.
Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.
Often used for loading and unloading gas tankers, these couplings are tough enough to handle frequent connections and designed to be virtually spill-free.
Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines.
Minimize spills if a driver pulls away from your diesel exhaust fluid (DEF) pump too soon. Both halves of these couplings have a shut-off valve that stops the flow they’re separated.
Turn the hand crank to rewind your hose.
These reels have more support than medium duty reels, so you can pull the hose out at an angle.
Also known as safety reels, these have a retraction speed that's up to 80% slower than other automatic-winding hose reels.
Use these reels in applications where the hose is pulled straight out of the reel.
Strong and well-supported to handle large-diameter hose, these reels can be used in high-vibration applications.
Reels have a frame-style construction that provides extra strength to handle large-diameter hose. They have very good corrosion resistance.
Not only do these reels have very good corrosion resistance, they also have more support than medium duty reels, so you can pull the hose out at an angle.
Use these reels in applications where the hose is pulled straight out of the reel. They have good to very good corrosion resistance.
Control the flow while dispensing diesel fuel with these nozzles.
Adjust the flow while dispensing liquid chemicals.
Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.
Nozzles allow you to control the flow while dispensing hydraulic fluid.
Dispense and control the flow of coolant with these nozzles.
To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.
Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.
Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.
Attach conduit to a knockout in an outlet box or enclosure.
These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.
Join pieces of conduit.
This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).
Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.
Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.
Connect different sizes of conduit.
Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.
This nonmagnetic aluminum conduit withstands damp and corrosive environments.
Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.
Transition between types of conduit.
These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.
One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.
Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.
Hook up faucets and other appliances to a water supply with these flexible hoses.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
This hose is made of steel.
These nozzles handle coolant pressure up to 150 psi.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
Move grease-dispensing guns in any direction without kinking the outlet hose.