We will reply to your message within an hour.
More
Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
With flanged ends that join with quick-clamp fittings, it’s easy to disconnect this hose for cleaning. It meets NSF/ANSI 61, a strict standard for drinking water systems, and is 3-A certified for its sanitary design.
Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Certified to meet NSF/ANSI 61, this discharge hose is safe for use with drinking water. It lays flat when not in use, so you can roll it up for easy transport and storage.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Transfer harsh chemicals while reducing vibration that could damage pumps or other equipment.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Transport milk, syrup, meat, and other wet food and beverages through your line.
With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.
For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.
Move flour, grain, rice, sugar, and other dry food through your line.
Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.
Made of polyurethane, this hose lasts more than twice as long as PVC hose when moving abrasive dry food. You can monitor your line since it's clear.
The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Developed to stand up to mining slurries, including those containing coal, this hose can handle your most abrasive mixtures of water and solids.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Conductive material embedded in the walls lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.
Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
If you’re tight on storage space, this hose compresses down to a small size.
Form elbows and bends with this hose and it will hold its shape without support.
Let go of this hose and it will spring back out of your way.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
The smooth interior prevents dust from getting trapped and building up inside the hose.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
This white hose makes dirt and other contaminants easy to spot.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
The strongest rubber duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
The neoprene coating on this hose withstands continuous motion without weakening.
Hose meets UL 94 V-2 for flame retardance.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.
Step on or drive over this hose without causing damage.
Run water, mist, oil, and other liquids through this hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.
A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.
Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.
Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.