We will reply to your message within an hour.
More
Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.
No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.
Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.
Because the white cover on this hose makes dirt and other contaminants easy to spot, it is often used as a washdown hose in creamery and paper-mill applications.
Transfer and spray water at low pressures.
Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.
Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.
Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.
The steel wire reinforcement gives this hose extra strength in high-pressure conditions.
The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.
Power away dirt with this heavy duty rubber hose that's also known as pressure-washer hose.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Certified to meet NSF/ANSI 61, this discharge hose is safe for use with drinking water. It lays flat when not in use, so you can roll it up for easy transport and storage.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.
Step on this hose and it springs back to its original shape.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Yarn reinforcement gives this hose good strength under pressure.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Attach barbed fittings to this hose for use in low-pressure air applications.
Hose is PVC, so it’s lighter and less cumbersome than rubber hose.
Identify your air lines by color.
An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.
The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Create a retracting air line that meets your needs.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.
Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.
Transport milk, syrup, meat, and other wet food and beverages through your line.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.
Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed.
Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.
Move flour, grain, rice, sugar, and other dry food through your line.
The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.
Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.
Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.
Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.
Made of nylon, this hose is lighter and easier to maneuver than rubber hydraulic hose.
This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.
Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi. Hose is not for use with gasoline.
Transfer fuel oil with a hose that stays flexible in subzero conditions.
This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.
Developed to stand up to mining slurries, including those containing coal, this hose can handle your most abrasive mixtures of water and solids.
Hose has good oil-resistance, so it won’t deteriorate or become brittle when exposed to grease and lubricants.