With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging. They produce a fine, atomized spray that is good for cooling, dust control, and humidification applications. But, compared to standard hollow-cone spray nozzles, they create larger droplets and a less precise spray pattern.

Brass spray nozzles have good corrosion resistance.

316 stainless steel spray nozzles are more chemical and corrosion resistant than brass nozzles.

PTFE spray nozzles have excellent resistance to chemicals and corrosion.

Spray nozzle fittings and manifolds are also available.

For technical drawings and 3-D models, click on a part number.

To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions. The simplest style of tank-cleaning nozzle, they don't have any moving parts that will wear or need maintenance.

Brass and nylon nozzles have good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck. To effectively rinse down tanks and other containers, they spray in multiple directions. But, compared to standard tank-washing nozzles, they produce larger droplets and have a less precise spray pattern. These nozzles don't have any moving parts that will wear or need maintenance.

316 stainless steel nozzles are more chemical and corrosion resistant than brass nozzles.

For technical drawings and 3-D models, click on a part number.

By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles. The force of the liquid flowing through is what causes them to rotate, so the higher the pressure, the faster they will rotate. They spray in multiple directions to effectively rinse down tanks, drums, and small vessels.

316 stainless steel and PVDF nozzles have good resistance to chemicals and corrosion. PTFE nozzles have excellent resistance to chemicals and corrosion.

FDA-compliant nozzles can be used in the food industry.

For technical drawings and 3-D models, click on a part number.

Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.

Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

To avoid contaminating diesel exhaust fluid (DEF), these nozzles are made of anodized aluminum and have a stainless steel spout. Similar to pumps at a gas station, these let you control how much DEF flows into your tank at once with the trigger or the hold-open clip. The clip adjusts to three different positions, each with a different flow rate. The design of the tip keeps the flow smooth and steady, reducing spills. When your tank is full, these nozzles stop dispensing automatically. A PVC scuff guard protects them from bumps and scrapes.

Threaded swivels and thread sealants (both sold separately) also won’t contaminate DEF. Threaded swivels install between your hose and these nozzles to prevent your line from twisting, kinking, and wearing prematurely. Thread sealants fill the small gaps between threads to prevent leaks.

Splash guards (sold separately) protect your hands from spray.

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Swivels for diesel exhaust fluid (DEF) won’t pollute the fluid, which is prone to contamination. Made of anodized aluminum and stainless steel, they stand up to chemicals. Those with NPT threads require a thread sealant (sold separately) to create a leakproof connection and protect the fluid from impurities.

Straight swivels rotate at the female connection point only. They are also known as inline swivels.

45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.

For technical drawings and 3-D models, click on a part number.

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.

Assemble and disassemble by snapping components together or pulling them apart. Assembly pliers (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Loc-Line hose with a 3/4" ID.

Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.

For technical drawings and 3-D models, click on a part number.

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.

Assemble and disassemble by snapping components together or pulling them apart. To ensure compatibility, select the color and trade size that match your current system. These components fit Snap-Loc hose with a 3/4" ID.

Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.

For technical drawings and 3-D models, click on a part number.