About Pipe Size and Spray Nozzles
More
About Fire-Fighting Hose Threads
More
Spray and Stream Nozzles for Fire-Fighting Hose
Twist the barrel to adjust water flow. Nozzles have a textured barrel for grip and a rubber bumper for impact resistance.
Polycarbonate nozzles are durable and lightweight.
Brass nozzles are more durable than aluminum nozzles.
Chemical Hose Nozzles
Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.
Style A has a lever to turn flow on and off. It has a higher flow rate and bigger spout than Style B to dispense large quantities of liquid chemicals into drums and tanks quickly.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size  | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
For Use With Citric Acid, Ethyl Alcohol, Phosphoric Acid, and Sodium Hydroxide | |||||||||||
| A | 200 | 2 | Threaded NPT Female | 200 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| A | 240 | 2 | Threaded NPT Female | 225 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 00000 |
Chemical Hose Nozzles with Hose and Threaded Fittings
Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.
Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.
Aluminum nozzles resist wear and tear better than polypropylene nozzles.
Spout | Hose | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Pipe Size | Pipe Connection | Max. Pressure | Temp. Range, °F | OD | Lg. | Fitting Material | Shut-Off Type | ID | OD | Bend Radius | Lg., ft. | Material | Includes | Each | |
Polypropylene Plastic Nozzles | ||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Phosphoric Acid, Potassium Hydroxide, Vegetable Oil | ||||||||||||||||
| 8 | 2 | Threaded NPT Female | 150 psi @ 72° F | 25° to 150° | 1 1/8" | 5" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 0000000 |
Aluminum Nozzles | ||||||||||||||||
For Use With Carbon Dioxide, Citric Acid, Coolant, Diesel Fuel, Ethanol, Ethyl Alcohol, Isopropyl Alcohol, Mineral Oil, Mineral Spirits | ||||||||||||||||
| 10 | 2 | Threaded NPT Female | 150 psi @ 72° F | 25° to 150° | 1" | 6" | Polypropylene Plastic | Manual | 1" | 1 5/16" | 4" | 8 | PVC Plastic | Mounting Bracket | 0000000 | 000000 |
Threaded Swivels for Hose Nozzles
Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
Aluminum swivels are lighter in weight than brass swivels. Anodized aluminum swivels have better corrosion resistance than uncoated aluminum. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.
Straight swivels rotate at the female connection point only; they are also known as inline swivels.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
Anodized Aluminum | ||||||
|---|---|---|---|---|---|---|
For Use With Gasoline, Hydraulic Fluid, and Coolant | ||||||
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 0000000 |
Chrome-Plated Brass | ||||||
For Use With Gasoline, Hydraulic Fluid, and Coolant | ||||||
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 000000 |
Barbed Swivels for Hose Nozzles
Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely. They are also known as inline swivels. Swivels are anodized aluminum, which is lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Anodized Aluminum | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | |||||||
| 2" | 2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 11/16" | 0000000 | 0000000 |
Clamp-On Flat Spray Nozzles
Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be removed for cleaning, but cannot be replaced with another tip. Made of reinforced plastic, all have a 300 Series stainless steel clamp that grips the pipe and an EPDM rubber gasket that prevents leaks. They're good for foam control and produce a flat, thin spray pattern.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gpm | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 20 psi | @ 40 psi | @ 100 psi | Orifice Dia. | For Hole Dia. | Overall Dia. | Lg. | Max. Pressure, psi | Max. Temp., °F | Reinforcement Material | Max. Swivel Angle | Spray Angle | 1-9 | 10-Up | |
Polypropylene Plastic | ||||||||||||||
For 2 Pipe Size | ||||||||||||||
| 4.9 | 7 | 11.1 | 0.19" | 9/16" | 1 13/16" | 2 1/2" | 100 | 175° | Glass | 52° | 65° | 000000000 | 000000 | 000000 |
Clamp-On Flat Spray Nozzles with Quick-Change Tip
These nozzles have replaceable tips that are removable with a quarter-turn. All tips have two O-rings to prevent leaks. Drill a hole anywhere along a pipe and snap on these nozzles. Made of reinforced plastic, all have a 300 Series stainless steel clamp that grips the pipe and an EPDM rubber gasket that prevents leaks. They're good for foam control and produce a flat, thin spray pattern.
For technical drawings and 3-D models, click on a part number.
Nozzles | Replacement Tips | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flow Rate, gpm | Each | Each | |||||||||||||||
| @ 20 psi | @ 40 psi | @ 100 psi | Orifice Dia. | For Hole Dia. | Overall Dia. | Lg. | Max. Pressure, psi | Max. Temp., °F | Reinforcement Material | Max. Swivel Angle | Spray Angle | 1-9 | 10-Up | 1-9 | 10-Up | ||
Polypropylene Plastic | |||||||||||||||||
For 2 Pipe Size | |||||||||||||||||
| 4.9 | 7 | 11.1 | 0.19" | 9/16" | 1 13/16" | 3" | 100 | 175° | Glass | 52° | 65° | 00000000 | 000000 | 000000 | 0000000 | 000000 | 000000 |
Tank-Washing Nozzles
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions. The simplest style of tank-cleaning nozzle, they don't have any moving parts that will wear or need maintenance.
316 stainless steel nozzles have excellent chemical and corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Flow Rate, gpm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 20 psi | @ 30 psi | @ 40 psi | @ 60 psi | For Max. Tank Dia., ft. | Orifice Dia. | Overall Wd. | Lg. | Max. Pressure, psi | Max. Temp., °F | Spray Angle | Each | |
2 NPT Female | ||||||||||||
| 147 | 180 | 208 | 255 | 18 | 0.12" | 3 1/2" | 4 7/16" | 60 | 390° | 360° | 000000000 | 0000000 |