How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Easy-Fit Barbed Hose Fittings for Air and Water
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into rubber hose and secure with a clamp.
Steel fittings are stronger and more durable than other metal fittings. They should be used in noncorrosive environments. Zinc-plated steel fittings have slightly better corrosion resistance than unplated steel fittings. Fittings with a threaded end are also known as hose nipples.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 125 psi @ 72° F, except For 5" to 8" Hose IDs: 100 psi @ 72° F
- Maximum Vacuum: For 1/2" to 4" Hose IDs: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: See table
Metal Cam-and-Groove Hose Couplings for Water
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Straight sockets with female threaded end are also known as D couplers.
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Brass couplings are softer than aluminum plugs and sockets, so they’re easier to thread together. They have good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
| Coupling Size | Plug OD | Pipe Size  | Max. Pressure | Each | |
Anodized Aluminum | |||||
|---|---|---|---|---|---|
| 5 | 5 3/4" | 5 | 75 psi @ 72° F | 00000000 | 0000000 |
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Sockets with male threaded end are also known as B couplers.
Straight sockets with female threaded end are also known as D couplers.
Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance. 316 stainless steel plugs and sockets have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | Pipe Size | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 5 | 5 3/4" | 5 | 75 psi @ 72° F | 000000000 | 0000000 |
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Easy-Fit Barbed Hose Fittings for Chemicals
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into rubber hose and secure with a clamp. Fittings are 316 stainless steel, which has excellent corrosion resistance to withstand a variety of chemicals.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: See table
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: ASME B1.20.1, ASTM A312
| For Hose ID | Pipe Size | Body Shape | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 5" | 5 | Round | 45 psi @ 72° F | 0000000 | 0000000 |
Vibration-Resistant Water Hose with Flanges
- Temperature Range: -50° to 800° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: 304 Stainless Steel
Also known as pump connectors, hose is sized to specific lengths for attaching to pumps. Its flexible braided construction absorbs vibration to reduce wear on equipment. To connect hose, bolt two same-size flanges together. You will need a gasket to complete the seal.
For technical drawings and 3-D models, click on a part number.