How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Zinc-plated steel fittings are stronger and more durable than other metal fittings. They have fair corrosion resistance, so they should be used primarily in dry environments.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Nickel-plated brass fittings resist corrosion better than plain brass fittings.
Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. 303/304 stainless steel fittings also stand up to wet and high-humidity environments.
Fittings that swivel until tightened rotate 360° for easy installation. Fittings with a threaded end are also known as hose nipples.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
Through-wall straight connectors are also known as bulkhead couplings and panel-mount couplings. They mount through your wall or panel to create an inlet or outlet.
Inline tee reducers are also known as branch tees.
NPTF (Dryseal) threads are compatible with NPT threads. Female NPSM (National Pipe Straight Mechanical) threads are compatible with male NPT and NPTF threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size  | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 000000 |
| 1/8" | 1/4 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
| 1/8" | 3/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | __ | 1 | 00000000 | 00000 |
| 1/8" | 1/2 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | __ | 1 | 00000000 | 00000 |
Brass | |||||||||
| 1/8" | 1/8 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 00000 |
| 1/8" | 1/4 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 00000 |
| 1/8" | 3/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
| 1/8" | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
303/304 Stainless Steel | |||||||||
| 1/8" | 1/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
| 1/8" | 1/4 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
- Maximum Pressure: 120 psi @ 72° F, except For 1/8" to 3/16" Hose IDs: 250 psi @ 72° F
- Maximum Vacuum: For 1/8" to 3/16" Hose IDs: 27 in. of Hg @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: See table
- Specifications Met: SAE J476
| For Hose ID | Pipe Size | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 1/8" | 1/8 | Worm-Drive Clamp | 1 | 00000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 1 | 0000000 | 00000 |
| 1/8" | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 1/8" | 1/8 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Aluminum | |||||||||
| 1/8" | 1/8 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 0000 |
| 1/8" | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 0000 |
303 Stainless Steel | |||||||||
| 1/8" | 1/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
| 1/8" | 1/4 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/8 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 000000 |
| 1/8" | 1/4 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 5 | 0000000 | 00000 |
| 1/8" | 3/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
| 1/8" | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/8 | 250 psi @ 72° F | -40° to 160° | Worm-Drive Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 0000000 | 000000 |
| 1/8" | 1/4 | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Nickel-Plated Brass | ||||||||
| 1/8" | 1/4 | 125 psi @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Aluminum | ||||||||
| 1/8" | 1/8 | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 0000 |
303 Stainless Steel | ||||||||
| 1/8" | 1/8 | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
| 1/8" | 1/4 | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: -30° to 200° F
- Attachment Type: Use Crimp-On Hose Ferrules, Worm-Drive Clamps or Band-and-Buckle Clamps
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Temperature Range: Brass Fittings: -40° to 160° F; Aluminum Fittings: -20° to 160° F
- Attachment Type: See table
- Specifications Met: Brass Fittings: SAE J476
| For Hose ID | Pipe Size | Gasket Material | Max. Pressure | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | 1/8 | Neoprene Rubber | 250 psi @ 72° F | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 5 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: -30° to 200° F
- Attachment Type: Use Crimp-On Hose Ferrules, Worm-Drive Clamps or Band-and-Buckle Clamps
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
For Hose ID | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
| 1/4" | 1/8" | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp, Band-and-Buckle Clamp | __ | 1 | 0000000 | 00000 |
Brass | |||||||||
| 3/16" | 1/8" | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 00000000 | 0000 |
| 1/4" | 1/8" | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 5 | 00000000 | 00000 |
303/304 Stainless Steel | |||||||||
| 1/4" | 1/8" | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp, Band-and-Buckle Clamp | __ | 1 | 0000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules; except For 1/2" to 3/4" Hose IDs: Use Worm-Drive Clamps, Band-and-Buckle Clamps or Crimp-On Hose Ferrules
- Specifications Met: SAE J476
| For Hose ID | Pkg. Qty. | Pkg. | |
Brass | |||
|---|---|---|---|
| 1/8" | 2 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 3/4" Hose IDs: Use Worm-Drive Clamps, Band-and-Buckle Clamps or Crimp-On Hose Ferrules
- Specifications Met: SAE J476
For Hose ID | ||||
|---|---|---|---|---|
| (A) | (B) | Pkg. Qty. | Pkg. | |
Brass | ||||
| 1/4" | 1/8" | 2 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" to 1" Hose IDs: Use Worm-Drive Clamps, Band-and-Buckle Clamps or Crimp-On Hose Ferrules
- Specifications Met: SAE J476
| For Hose ID | Pkg. Qty. | Pkg. | |
Brass | |||
|---|---|---|---|
| 1/8" | 2 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: SAE J476
For Hose ID | ||||
|---|---|---|---|---|
| (A) | (B) | Pkg. Qty. | Pkg. | |
Brass | ||||
| 1/4" | 1/8" | 1 | 00000000 | 00000 |
Tight-Seal Barbed Hose Fittings for Air and Water
Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule. The nut swivels until tightened for easy installation. Fittings are brass for good corrosion resistance.
NPSM (National Pipe Straight Mechanical) female threads are compatible with male NPT and NPTF (Dryseal) threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 250 psi @72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" to 3/4" Hose IDs: Use Band-and-Buckle Clamps
- Specifications Met: See table
| For Hose ID | Pipe Size | Thread Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 1/8 | NPSM | ASME B1.20.1, SAE J476 | 5 | 00000000 | 000000 |
Industrial Quick-Disconnect Hose Couplings for Air
A complete coupling consists of a plug and a socket (both sold separately or in a set) that connect and disconnect quickly. Use them if you need frequent access to a line. They are also known as industrial interchange couplings. All Industrial plugs are compatible with any of the Industrial sockets of the same coupling size, regardless of the pipe size or barbed hose ID.
Steel is stronger and more durable than other metals. Zinc-plated steel has fair corrosion resistance and should be used primarily in dry environments. Brass is softer than other metals, so it’s easier to thread together. It has good corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Attachment Type: See table
- Specifications Met: See table
Plugs are also known as nipples.
Plugs and sockets with a clamp-on/crimp-on barbed end insert into rubber hose and secure with a clamp or a crimp-on hose ferrule.
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Attachment Type: See table
- Specifications Met: See table
Sockets have a shut-off valve that stops the flow when the coupling is separated, so air won’t leak from the line.
Plugs and sockets with a clamp-on/crimp-on barbed end insert into rubber hose and secure with a clamp or a crimp-on hose ferrule.
Sleeve-lock sockets connect by sliding back the sleeve on the socket, inserting the plug, and releasing the sleeve. To disconnect, slide the sleeve back and pull out the plug.
For Plug Tip | ||||||
|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Attachment Type | Each | |
Brass | ||||||
| 1/8 | 1/8" | 1/4" | 1/8" | Worm-Drive Clamp, Band-and-Buckle Clamp | 00000000 | 00000 |
Compact Quick-Disconnect Hose Couplings for Air
A slim body allows these couplings to fit into tight spaces. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All Compact plugs are compatible with any of the Compact sockets of the same coupling size, regardless of the pipe size or barbed hose ID.
Plugs are also known as nipples.
Sockets have a shut-off valve that stops the flow when the coupling is separated, so air won’t leak from the line. They are push-to-connect style. To connect, push the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects.
Plugs and sockets with a barbed end insert into plastic or rubber hose and secure with a crimp-on hose ferrule.
Brass is softer than zinc-plated steel, so it’s easier to thread together. It offers good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 500 psi @ 72° F
- Temperature Range: -40° to 250° F
- Attachment Type: Use Crimp-On Hose Ferrules
Plug Tip | |||||
|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Each | |
Brass | |||||
| 1/8 | 3/32" | 7/32" | 1/8" | 00000000 | 000000 |
- Maximum Pressure: 500 psi @ 72° F
- Temperature Range: -40° to 250° F
- Attachment Type: Use Crimp-On Hose Ferrules
For Plug Tip | |||||
|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Each | |
Brass | |||||
| 1/8 | 3/32" | 7/32" | 1/8" | 00000000 | 000000 |
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
Connectors and reducers are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | For Use With | Each | |
316 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 1/8 | 300 psi @ 72° F | -30° to 200° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 00000000 | 000000 |
| 1/8" | 1/4 | 300 psi @ 72° F | -30° to 200° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 00000000 | 00000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 1/8" | 1/8 | 300 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 1/8" | 1/4 | 300 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 1/8" | 1/8 | 300 psi @ 72° F | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 1/8" | 1/4 | 300 psi @ 72° F | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Band-and-Buckle Clamps
For Hose ID | ||||||
|---|---|---|---|---|---|---|
| (A) | (B) | Max. Pressure | Temperature Range, °F | For Use With | Each | |
316 Stainless Steel | ||||||
| 1/4" | 1/8" | 300 psi @ 72° F | -30° to 200° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 00000000 | 000000 |
Cleaned and Bagged Metal Barbed Hose Fittings for Chemicals
Each of these metal fittings is double bagged to prevent contamination in areas that require a high level of cleanliness. They’re even clean enough to be used for oxygen service. Constructed from 316 stainless steel, they won’t corrode from repeat cleanings with harsh chemicals. They’re also called hose nipples. To connect them, slide the barbed end into plastic or rubber hose and secure it with a clamp.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Butyl Alcohol, Citric Acid, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Mineral Oil, Phosphoric Acid, Sodium Hydroxide
- Maximum Pressure: 400 psi @ 72° F
- Temperature Range: -100° to 450° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps, or Band-and-Buckle Clamps
Barbed Hose Fittings for Compressed Gas
Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.
Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection.
Connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
| For Hose ID | For Use With | Each | |
Brass | |||
|---|---|---|---|
| 1/8" | Air, Compressed Gas, LP Gas, Natural Gas | 000000 | 00000 |
Drinking Water Hose Fittings
Fittings meet NSF/ANSI Standard 61 for drinking (potable) water. They are brass, which offers good corrosion resistance. Slide the barbed end into plastic or rubber hose and secure with a clamp or a crimp-on hose ferrule.
Fittings with a threaded pipe end are also known as hose nipples.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
| For Hose ID | Each | |
Brass | ||
|---|---|---|
| 1/8" | 00000000 | 00000 |