Crimp-On Ferrules for Air and Water Hose
![](/prerenderstable/mvPRE/contents/gfx/imagecache/534/5349k45c1-digital1567085691-p9@halfx_637026645170666827.png?ver=imagenotfound)
Use ferrules to create a permanent connection between your air- and water-hose and barbed hose fittings. You will need a hose crimper (sold separately) for installation.
Brass and aluminum ferrules have good corrosion resistance. Choose a ferrule with an ID no more than 0.025" larger than your hose OD (measured with the fitting installed); also make sure the ferrule is at least as long as the barbed end of your fitting.
304 stainless steel ferrules offer very good corrosion resistance. Choose a ferrule with an ID no more than 0.031" larger than the hose OD (measured with the fitting installed).
For technical drawings and 3-D models, click on a part number.
Hose End ID | Lg. | Fitting End ID | Pkg. Qty. | Pkg. | |
Brass | |||||
---|---|---|---|---|---|
0.275" | 0.5" | 0.217" | 50 | 0000000 | 000000 |
0.33" | 0.484" | 0.25" | 50 | 0000000 | 00000 |
0.358" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
0.38" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
0.41" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
0.45" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
0.478" | 0.688" | 0.328" | 50 | 0000000 | 00000 |
0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
0.5" | 1" | 0.344" | 25 | 0000000 | 00000 |
0.525" | 1" | 0.375" | 25 | 0000000 | 00000 |
0.548" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
0.562" | 1" | 0.438" | 25 | 0000000 | 00000 |
0.575" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
0.593" | 1" | 0.438" | 25 | 0000000 | 00000 |
0.6" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
0.625" | 0.55" | 0.453" | 25 | 0000000 | 00000 |
0.625" | 1" | 0.453" | 25 | 0000000 | 00000 |
0.65" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
0.656" | 1" | 0.438" | 25 | 0000000 | 00000 |
0.675" | 0.516" | 0.5" | 25 | 0000000 | 00000 |
0.687" | 1" | 0.5" | 25 | 0000000 | 00000 |
0.7" | 0.516" | 0.5" | 50 | 0000000 | 00000 |
0.718" | 1" | 0.625" | 25 | 0000000 | 00000 |
0.725" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
0.75" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
0.75" | 1" | 0.625" | 25 | 0000000 | 00000 |
0.781" | 1" | 0.625" | 25 | 0000000 | 00000 |
0.8" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
0.812" | 1" | 0.625" | 25 | 0000000 | 00000 |
0.825" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
0.85" | 0.563" | 0.688" | 25 | 0000000 | 00000 |
0.875" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
0.9" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
0.925" | 0.81" | 0.688" | 25 | 0000000 | 00000 |
0.975" | 0.844" | 0.688" | 10 | 0000000 | 00000 |
1" | 0.844" | 0.687" | 25 | 0000000 | 00000 |
1.05" | 0.844" | 0.693" | 25 | 0000000 | 00000 |
1.1" | 0.844" | 0.812" | 25 | 0000000 | 00000 |
1.15" | 0.844" | 0.875" | 25 | 0000000 | 00000 |
1.375" | 0.875" | 1.125" | 10 | 0000000 | 00000 |
Aluminum | |||||
0.375" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
0.45" | 0.5" | 0.265" | 50 | 0000000 | 00000 |
0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
0.625" | 0.55" | 0.453" | 50 | 0000000 | 00000 |
0.625" | 0.968" | 0.453" | 50 | 0000000 | 00000 |
0.675" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
0.75" | 0.55" | 0.5" | 50 | 0000000 | 00000 |
304 Stainless Steel | |||||
0.478" | 0.687" | 0.328" | 5 | 0000000 | 0000 |
0.53" | 1" | 0.438" | 5 | 0000000 | 0000 |
0.56" | 1" | 0.437" | 5 | 0000000 | 0000 |
0.593" | 1" | 0.438" | 5 | 0000000 | 0000 |
0.625" | 1" | 0.437" | 5 | 0000000 | 0000 |
0.656" | 1" | 0.437" | 5 | 0000000 | 0000 |
0.69" | 1" | 0.5" | 5 | 0000000 | 0000 |
0.718" | 1" | 0.625" | 5 | 0000000 | 0000 |
0.75" | 1" | 0.625" | 5 | 0000000 | 0000 |
0.925" | 0.968" | 0.75" | 5 | 0000000 | 0000 |
1.175" | 0.844" | 0.875" | 5 | 0000000 | 0000 |
Crimp-On Ferrules for Welding Hose
![](/prerenderstable/mvPRE/contents/gfx/imagecache/792/79205a673multinegative_front_negative_right_flop15_1660920844_287@halfx_637964997947132719.png?ver=imagenotfound)
Use ferrules to create a permanent connection between your welding hose and barbed hose fittings. You will need a hose crimper (sold separately) for installation. Ferrules are brass for good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Hose End ID | Lg. | Each | |
Brass | |||
---|---|---|---|
0.45" | 9/16" | 000000000 | 00000 |
0.478" | 11/16" | 000000000 | 0000 |
1/2" | 1/2" | 000000000 | 000 |
1/2" | 1" | 000000000 | 0000 |
0.525" | 1/2" | 000000000 | 000 |
0.525" | 1" | 000000000 | 0000 |
0.548" | 31/64" | 000000000 | 000 |
0.562" | 1" | 000000000 | 0000 |
0.564" | 3/4" | 000000000 | 0000 |
0.575" | 31/64" | 000000000 | 000 |
0.593" | 1" | 000000000 | 0000 |
5/8" | 1/2" | 000000000 | 0000 |
5/8" | 1" | 000000000 | 0000 |
0.656" | 1" | 000000000 | 0000 |
0.687" | 1" | 000000000 | 0000 |
0.718" | 1" | 000000000 | 0000 |
3/4" | 1" | 000000000 | 0000 |
0.781" | 1" | 000000000 | 0000 |
0.812" | 1" | 000000000 | 0000 |