How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
About Fire-Fighting Hose Threads
More
Threaded On/Off Valves with Garden Hose Outlet
- Valve Type: Ball
- For Use With:
Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Methanol
Nickel-Plated Brass Body: Water, Air, Helium, Butane, Ethanol, Ethylene Glycol, Gasoline, Kerosene, Mineral Spirits, Natural Gas, Propane, Soap Solutions, Isopropyl Alcohol
Turn the flow to any garden hose on and off. These valves have garden hose threads, which are a standard size, so they're universally compatible with all standard garden hoses. They do not restrict flow when open—they’re full port.
Nickel-plated brass valves stand up to corrosion better than plain brass valves. They have a fluoroelastomer seal that withstands chemicals and temperature fluctuations, making them a good choice for lines flushed with hot fluids or cleaners.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Handle Material | Seal Material | End-to-End Lg. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female Inlet × GHT Male Outlet | |||||||||
| 3/4 | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 000000 |
GHT Female Inlet × GHT Male Outlet | |||||||||
| __ | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Buna-N Rubber | 1 7/8" | 00000000 | 00000 |
Nickel-Plated Brass Body | |||||||||
NPT Female Inlet × GHT Male Outlet | |||||||||
| 3/4 | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Viton® Fluoroelastomer | 1 7/8" | 00000000 | 00000 |
GHT Female Inlet × GHT Male Outlet | |||||||||
| __ | 3/4 | 8.7 | 125 psi @ 72° F | 0° to 180° | Zinc | Viton® Fluoroelastomer | 1 7/8" | 00000000 | 00000 |
Plastic Threaded On/Off Valves with Garden Hose Threads
- Valve Type: Ball
- For Use With: Air, Water
- Seat Material:
NPT Male × GHT Male: Buna-N Rubber
Socket Female × GHT Male: Buna-N Rubber
All Other Valves: PTFE Plastic
Control flow through any garden hose—the threads on these valves are universally compatible with garden hose connections. Made of PVC, they’re a lightweight and corrosion resistant alternative to metal valves. A Buna-N rubber seal gives them good resistance to water and oil. The threaded connections on these valves let you take apart and reassemble your setup as needed for maintenance.
Valves with a barbed inlet make quick connections to unthreaded hose and tubing.
Valves with a socket-connect inlet bond to unthreaded pipe with primer and cement (both not included) to create a permanent, leak-tight connection. The connection is stronger than that of threaded or barbed connections.
Full-port valves have a wider bore than standard-port valves, so they won’t restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | Not Rated | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | Not Rated | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/4 | 8 | 125 psi @ 72° F | 35° to 140° | Standard | 2 1/16" | 0000000 | 00000 |
| Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
| 3/4 | 12.3 | 125 psi @ 72° F | 35° to 140° | Full | 2 15/16" | 0000000 | 000000 |
| Hose Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Light Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/4 | 3/8" | 15.6 | 125 psi @ 72° F | 35° to 140° | Full | 2 7/8" | 00000000 | 000000 |
Threaded On/Off Valves with Garden Hose Outlet for Drinking Water
- Valve Type: Ball
- For Use With: Drinking Water
- Seal Material: PTFE Plastic
- Specifications Met: NSF/ANSI 61
Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings. The included hose cap protects them from dirt and debris.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Hose Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Features | Each | |
Bronze Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × GHT Male | |||||||||
| 1/2 | 3/4 | 27 | 400 psi @ 400° F | -40° to 400° | Full | 2 5/8" | Hose Cap | 00000000 | 000000 |
| 3/4 | 3/4 | 50 | 400 psi @ 400° F | -40° to 400° | Full | 2 15/16" | Hose Cap | 00000000 | 00000 |
| 1 | 3/4 | 43 | 600 psi @ 100° F | -20° to 200° | Standard | 4 3/16" | Hose Cap | 000000000 | 000000 |
Easy-Maintenance Threaded On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Carbon Dioxide, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Methanol, Methyl Ethyl Ketone, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water
- Ball Material: Polypropylene Plastic
- Seal Material: See table
- Seat Material: PTFE Plastic
No need to remove these valves from your line to access their internal components—the three-piece bolted body comes apart. Ideal in chemical-processing applications, the seal and polypropylene body stand up to aggressive and corrosive solutions.
Valves with a lever handle give you more leverage than valves with T-handles, so you can quickly open and close them with ease. To limit access to your line, replace the handle with a locking handle (sold separately). Fix the handle in place using a padlock (not included) with a shackle diameter up to 19/64".
Valves with a cam-and-groove male plug quickly connect and disconnect medium- to large-diameter hose lines. Insert the plug end into a cam-and-groove female socket.
Valves with a fluoroelastomer seal fit snug even when surfaces are irregular, misaligned, or dirty. The seal compresses and conforms to create a tight, leakproof connection.
Full-port valves do not restrict flow.
For technical drawings and 3-D models, click on a part number.
Valves | Locking Handles | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Coupling Size | Plug OD | Max. Pressure | Temperature Range, °F | Seal Material | Port Type | End-to-End Lg. | Each | Each | ||
Black Polypropylene Plastic Body with Lever Handle | |||||||||||
NPT Male × Cam-and-Groove Male Plug | |||||||||||
| 2 | 2 | 2 7/16" | 150 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 8 1/4" | 00000000 | 000000 | 000000 | 00 |
| 2 | 2 | 2 7/16" | 225 psi @ 70° F | 0° to 150° | Fluoroelastomer Rubber | Full | 8 1/8" | 00000000 | 00000 | 00000000 | 000000 |
Diverting Valves with Fire-Fighting Hose Fittings
- Valve Type: Ball
- For Use With: Water
- Seal Material: Buna-N Rubber
Control the flow of water in two directions from a single source—these diverting valves have two balls and handles for independent operation of each outlet. They can direct flow to one side outlet at full capacity while shutting off flow to the second side outlet, direct flow to both side outlets at reduced capacity, or shut off flow to both side outlets. Valves have a brass body for good corrosion resistance. They are for use with fire-fighting hose.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
For technical drawings and 3-D models, click on a part number.
| Inlet Fire Hose Trade Size | Outlet Fire Hose Trade Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
| Inlet Pipe Size | Outlet Pipe Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
Plastic Cam-and-Groove Hose Couplings with Shut-Off Valve for Chemicals
These polypropylene couplings are lighter in weight than metal cam-and-groove couplings, yet have the corrosion resistance to handle chemical applications. They have excellent strength and abrasion resistance. Couplings consist of a plug and a socket that are sold together as a set. Use them to quickly connect and disconnect medium-to large-diameter hose lines. Also known as dry disconnects and double shut-off couplings, the plug and the socket both have a shut-off valve for minimal fluid loss when disconnecting the hose line. To connect, insert the plug into the socket, press the locking levers down, and turn the valve handles to the open position. The locking levers prevent accidental disconnection. To disconnect, turn the valve handles to the closed position, lift both levers, and pull out the plug. Couplings cannot be disconnected when the valves are open. They are not compatible with any other style of coupling. Dust covers are included to protect the ends of couplings when not in use.
Note: The listed length refers to the length of the coupling when connected.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
- For Use With: Acetic Acid, Magnesium Chloride
- Max. Pressure: 100 psi @ 72° F
- Temperature Range: -20° to 150° F
Plug and Socket Sets | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plug | Socket | Replacement Gaskets | ||||||||||
| Coupling Size | Pipe Size | Thread Type | Connection Style | OD | Connection Style | ID | Valve Type | Each | Pkg. Qty. | Pkg. | ||
Polypropylene Plastic | ||||||||||||
| 1 1/2 | 1 1/2 | NPT | Cam-and-Groove Male × Threaded Female | 2 1/8" | Cam-and-Groove Female × Threaded Female | 2 1/8" | Ball | 0000000 | 0000000 | 10 | 0000000 | 000000 |
| 2 | 2 | NPT | Cam-and-Groove Male × Threaded Female | 2 1/2" | Cam-and-Groove Female × Threaded Female | 2 1/2" | Ball | 0000000 | 000000 | 10 | 0000000 | 00000 |
On/Off Valves with Garden Hose Threads
Start and stop the flow of water through your garden hose.
Plastic valves are lighter in weight than metal valves, but they’re typically not as durable. Zinc valves are stronger and more resistant to wear and tear than plastic valves. Brass valves are stronger and resist corrosion better than plastic, zinc, and aluminum valves. Aluminum valves resist the highest pressures. TPR-coated valves stay safe to touch because they won’t get too hot in the summer or too cold in the winter.
Valves with a toggle switch are easy to use one-handed because you can flip the water on or off with just your thumb. Valves with a contoured lever handle are easy to grip, even if they're wet, oily, or you're wearing gloves.
Add kink absorbers to eliminate sharp bends between your hose and your valve, maximizing flow and preventing damage.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
| Handle Type | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
| T-Handle | 20.5 | 60 psi @ 100° F | 3" | __ | Washers | 0000000 | 00000 |
| Toggle Switch | 1.3 | 60 psi @ 72° F | 4 5/16" | TPR Coated | Washers | 00000000 | 00000 |
| Contoured Lever Handle | 41.6 | 60 psi @ 100° F | 6 7/8" | TPR Coated | Washers, Flexible Kink Absorbers | 00000000 | 00000 |
Zinc Body | |||||||
| Lever Handle | Not Rated | 120 psi @ 60° F | 1 11/16" | __ | Washers | 0000000 | 0000 |
| T-Handle | 13.1 | 120 psi @ 60° F | 3 1/4" | TPR Coated | Washers | 00000000 | 0000 |
| T-Handle | 41.6 | 60 psi @ 100° F | 3 7/16" | __ | Washers | 00000000 | 00000 |
Brass Body | |||||||
| Lever Handle | 18.1 | 60 psi @ 100° F | 1 13/16" | __ | Washers | 0000000 | 00000 |
Aluminum Body | |||||||
| Lever Handle | 4.9 | 400 psi @ 60° F | 1 3/4" | TPR Coated | Washers | 00000000 | 00000 |
Hose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Pressure | Lg. | Fitting Material | Material | Color | Outer Coil Material | Washer Material | Each | |
| 120 psi @ 72° F | 5 49/64" | Zinc | PVC Plastic | Green | Steel | TPR Rubber | 0000000 | 00000 |
Swivel On/Off Valves with Garden Hose Threads
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 120° F
Keep fluids flowing—these valves twist and turn to prevent your hose from kinking. They connect to your faucet and swivel 360°, which makes it less likely your hose will kink when you move it side to side. Their lever handle is easy to turn, and lets you know if the valve is open or closed at a glance.
Zinc valves have good corrosion resistance. A plastic coating protects your hands by keeping the valve’s surface from getting too hot or cold.
Brass valves are more durable and corrosion resistant than zinc valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Add a kink absorber for additional protection to your hose. Connected between the valve and the hose, they prevent kinking from sharp up and down movements.
For technical drawings and 3-D models, click on a part number.