Get everything you need to perform up to 30 OSHA-approved qualitative fit tests on your respirators.

Note: Respirators must be equipped with an organic vapor cartridge.

These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications. Made of Tychem 2000 (formerly known as Tychem QC), these hood respirators have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Respirators include a rechargeable lithium ion (Li-Ion) battery that provides approximately four hours of continuous use when fully charged. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

Divert compressed air from a single line to two respirators. Often used in plants with limited air sources, these manifolds allow two workers to share the same line. Shaped like a briefcase, they’re easy to tote around your facility—use them up to 300 ft. from an air source. The case is polypropylene, so it’s durable enough to hold up to wear and tear.

Adjust the temperature of the air flowing into your respirator. These tubes rapidly spin the air from your supply line to separate it into hot and cold streams. Turn a knob to control how much air from each stream flows into your respirator.

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance. These respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to work up to 300 ft. from an air supply. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.

Remove moisture, odors, and particles from your compressed air line before they reach respirators. These filters have a seven-stage purification process that captures particles as small as 0.5 microns. The mounting bracket doubles as a carrying handle to move them between air connection points in your facility.

To meet the OSHA standard for Grade D breathable air, these filters must be used with a carbon monoxide monitor to confirm that CO levels are safe. Replace filter inserts after five hundred hours of run time or if there’s a drop in pressure.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection.

Pinlock suspension hats adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Replace the filter in your pump to supply clean air to your respirator.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.