About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
Right-Angle AC Gearmotors
A motor and speed reducer in one, these gearmotors have hypoid gears for energy-efficient operation. You can use them to turn a shaft on your equipment or add a keyed shaft (sold separately). Wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors meet IP54 for protection from dust and splashed water. They're inverter rated so you can use them with a motor speed control (not included) to adjust the motor speed.
For technical drawings and 3-D models, click on a part number.
Gearmotors | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Output | Optional Keyed Shafts with Key Stock | |||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Radial Load Cap., lbs. | Full Load Current, A | Lg. | Wd. | Ht. | For Shaft Dia. | Shaft Center to Base | Environmental Rating | Each | Each | ||
230 Volts AC, Three Phase | |||||||||||||
| 1/15 | 7 rpm @ 470 in.-lbs. | 725 | 0.39 | 13" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 000000000 | 0000000 | 000000 |
| 1/8 | 14 rpm @ 440 in.-lbs. | 550 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 28 rpm @ 220 in.-lbs. | 455 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 56 rpm @ 105 in.-lbs. | 370 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 84 rpm @ 73 in.-lbs. | 330 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 168 rpm @ 35 in.-lbs. | 270 | 0.63 | 14 3/4" | 4" | 6 1/8" | 3/4" | 1.91" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
230/400-460 Volts AC, Three Phase | |||||||||||||
| 1/8 | 7 rpm @ 900 in.-lbs. | 940 | 0.9/0.6-0.7 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/8 | 14 rpm @ 450 in.-lbs. | 780 | 0.9/0.6-0.7 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/5 | 28 rpm @ 360 in.-lbs. | 580 | 1.2/0.8-0.9 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/5 | 42 rpm @ 240 in.-lbs. | 510 | 1.2/0.8-0.9 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/5 | 56 rpm @ 180 in.-lbs. | 470 | 1.2/0.8-0.9 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/5 | 84 rpm @ 120 in.-lbs. | 430 | 1.2/0.8-0.9 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/5 | 168 rpm @ 60 in.-lbs. | 355 | 1.2/0.8-0.9 | 13 1/2" | 4 3/4" | 6 5/8" | 1" | 2.11" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/4 | 7 rpm @ 1,730 in.-lbs. | 1,120 | 1.25/0.9-1 | 16" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/4 | 14 rpm @ 871 in.-lbs. | 965 | 1.25/0.9-1 | 16" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/2 | 27 rpm @ 982 in.-lbs. | 760 | 1.94/0.9-1 | 13 1/2" | 5 5/8" | 7 5/8" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/2 | 40 rpm @ 655 in.-lbs. | 675 | 1.94/0.9-1 | 13 1/2" | 5 5/8" | 7 5/8" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/2 | 53 rpm @ 487 in.-lbs. | 625 | 1.94/0.9-1 | 13 1/2" | 5 5/8" | 7 5/8" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/2 | 80 rpm @ 327 in.-lbs. | 565 | 1.94/0.9-1 | 13 1/2" | 5 5/8" | 7 5/8" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
| 1/2 | 160 rpm @ 168 in.-lbs. | 465 | 1.94/0.9-1 | 13 1/2" | 5 5/8" | 7 5/8" | 1 1/4" | 2.28" | IP54 | 0000000 | 00000000 | 0000000 | 00000 |
AC Gearmotors
Turn speed into torque with these AC-powered gearmotors—they combine a motor and a speed reducer into one. You can wire them for clockwise or counterclockwise rotation; instructions are included. The parallel shaft transmits motion inline with the motor.
Base-mount motors come with a base, so they can be secured to a flat surface. TEFC (totally enclosed fan cooled) motors have an enclosure to protect them from dirt, dust, and moisture. An external fan blows air on the enclosure to keep them cool. 230/460V AC motors are inverter-rated, so you can adjust the speed with a motor speed control (not included).
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Inverter Rated | Motor Enclosure Type | Lg. | Wd. | Ht. | Gear Type | Bearing Type | Dia. | Lg. | Center to Base | Class | Max. Temp., °F | Environmental Rating | Each | |
230/460 Volts AC, Three Phase | |||||||||||||||||
| 1/4 | 10 rpm @ 1,460 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 17" | 7" | 7 3/4" | Helical | Roller | 1 1/4" | 2 3/8" | 4.53" | F | 311° | IP54 | 0000000 | 0000000 |
| 1/4 | 20 rpm @ 760 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/2" | 6" | 7 1/4" | Helical | Roller | 1" | 2" | 3.54" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 30 rpm @ 515 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/2" | 6" | 7 1/4" | Helical | Roller | 1" | 2" | 3.54" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 38 rpm @ 400 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 53 rpm @ 285 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 73 rpm @ 205 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 100 rpm @ 150 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 148 rpm @ 106 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/4 | 294 rpm @ 44 in.-lbs. | 1.04/0.52 | Yes | Totally Enclosed Fan Cooled (TEFC) | 14 1/2" | 5 1/2" | 6 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 10 rpm @ 3,100 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 18 3/4" | 8" | 8 3/4" | Helical | Roller | 1 3/8" | 2 3/4" | 4.53" | F | 311° | IP54 | 0000000 | 00000000 |
| 1/2 | 20 rpm @ 1,530 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 17 3/4" | 7" | 8 1/2" | Helical | Roller | 1 1/4" | 2 3/8" | 4.53" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 31 rpm @ 1,010 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 16 3/4" | 6 1/4" | 7 3/4" | Helical | Roller | 1" | 2" | 3.54" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 39 rpm @ 810 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 6" | 8" | Helical | Roller | 1" | 2" | 3.54" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 54 rpm @ 575 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/4" | 5 1/2" | 7 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 75 rpm @ 415 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/4" | 5 1/2" | 7 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 102 rpm @ 310 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/4" | 5 1/2" | 7 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 151 rpm @ 205 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/4" | 5 1/2" | 7 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1/2 | 300 rpm @ 106 in.-lbs. | 1.83/0.91 | Yes | Totally Enclosed Fan Cooled (TEFC) | 15 1/4" | 5 1/2" | 7 3/4" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1 | 20 rpm @ 3,230 in.-lbs. | 3.1/1.56 | Yes | Totally Enclosed Fan Cooled (TEFC) | 21" | 8" | 9 1/4" | Helical | Roller | 1 3/8" | 2 3/4" | 4.53" | F | 311° | IP54 | 0000000 | 00000000 |
| 1 | 41 rpm @ 1,550 in.-lbs. | 3.1/1.56 | Yes | Totally Enclosed Fan Cooled (TEFC) | 20" | 7" | 9" | Helical | Roller | 1 1/4" | 2 3/8" | 4.53" | F | 311° | IP54 | 0000000 | 00000000 |
| 1 | 72 rpm @ 890 in.-lbs. | 3.1/1.56 | Yes | Totally Enclosed Fan Cooled (TEFC) | 18 3/4" | 6" | 8 1/2" | Helical | Roller | 1" | 2" | 3.54" | F | 311° | IP54 | 0000000 | 000000 |
| 1 | 153 rpm @ 415 in.-lbs. | 3.1/1.56 | Yes | Totally Enclosed Fan Cooled (TEFC) | 17 1/2" | 5 3/4" | 8" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 1 | 304 rpm @ 210 in.-lbs. | 3.1/1.56 | Yes | Totally Enclosed Fan Cooled (TEFC) | 17 1/2" | 5 3/4" | 8" | Helical | Roller | 3/4" | 1 1/2" | 2.95" | F | 311° | IP54 | 0000000 | 000000 |
| 2 | 31 rpm @ 4,070 in.-lbs. | 6/3 | Yes | Totally Enclosed Fan Cooled (TEFC) | 23 1/4" | 8 1/2" | 9 3/4" | Helical | Roller | 1 3/8" | 2 3/4" | 5.12" | F | 311° | IP54 | 0000000 | 00000000 |
| 2 | 75 rpm @ 1,690 in.-lbs. | 6/3 | Yes | Totally Enclosed Fan Cooled (TEFC) | 21 1/2" | 7" | 9 1/2" | Helical | Roller | 1 1/4" | 2 3/8" | 4.53" | F | 311° | IP54 | 0000000 | 00000000 |
| 2 | 149 rpm @ 850 in.-lbs. | 6/3 | Yes | Totally Enclosed Fan Cooled (TEFC) | 20" | 6 3/4" | 9" | Helical | Roller | 1" | 1 1/2" | 3.54" | F | 311° | IP54 | 0000000 | 00000000 |
Speed-Control Right-Angle AC Gearmotors
A good solution for tight spaces, these gearmotors let you control the start, stop, rotation direction, and speed while transmitting motion at a 90° angle from the motor, so you can mount them alongside your application. They combine a motor with a speed reducer to lower speed while increasing torque. All have a mounted keypad to make changes to the integrated speed control. Mount them to flat surfaces using their base. These gearmotors have a TEFC (totally enclosed fan cooled) enclosure that protects better than an ODP (open dripproof) enclosure. They aren’t airtight, but they can be used in dirty, dusty, and damp environments. To keep the motor cool, the enclosure has an external fan that blows air over the outside of the motor.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Speed Range @ Continuous Operating Torque | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Environmental Rating | Each | |
Left-Hand Output Shaft | |||||||||||
240 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.9 rpm to 12 rpm @ 2,660 in.-lbs. | 1.9 | 19" | 11 1/4" | 12" | 2 7/8" | 2 7/8" | 5.2" | IP54 | 0000000 | 000000000 |
| 1/2 | 4.8 rpm to 29 rpm @ 1,080 in.-lbs. | 1.9 | 17 1/4" | 9 1/2" | 11" | 1" | 2 1/8" | 3.94" | IP54 | 0000000 | 00000000 |
| 1/2 | 7.6 rpm to 46 rpm @ 680 in.-lbs. | 1.9 | 17 1/4" | 9 1/2" | 10 3/4" | 1" | 2 1/8" | 2.48" | IP54 | 0000000 | 00000000 |
| 1/2 | 24 rpm to 144 rpm @ 220 in.-lbs. | 1.9 | 16" | 9" | 10" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
| 1 | 1.9 rpm to 12 rpm @ 5,750 in.-lbs. | 3.5 | 23 1/4" | 13 1/2" | 13 1/2" | 2" | 4 1/8" | 7.09" | IP54 | 0000000 | 00000000 |
| 1 | 4.8 rpm to 29 rpm @ 2,120 in.-lbs. | 3.5 | 20 1/2" | 11" | 11 3/4" | 1 3/8" | 2 7/8" | 4.41" | IP54 | 0000000 | 00000000 |
| 1 | 7.6 rpm to 46 rpm @ 1,350 in.-lbs. | 3.5 | 21" | 10 1/2" | 12 1/2" | 1 1/4" | 2 1/2" | 3.15" | IP54 | 0000000 | 00000000 |
| 1 | 24 rpm to 144 rpm @ 445 in.-lbs. | 3.5 | 18" | 9" | 10 1/2" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
460 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.9 rpm to 12 rpm @ 2,660 in.-lbs. | 1.1 | 19" | 11 1/4" | 12" | 2 7/8" | 2 7/8" | 5.2" | IP54 | 0000000 | 00000000 |
| 1/2 | 4.8 rpm to 29 rpm @ 1,080 in.-lbs. | 1.1 | 17 1/4" | 9 1/2" | 11" | 1" | 2 1/8" | 3.94" | IP54 | 0000000 | 00000000 |
| 1/2 | 6.5 rpm to 40 rpm @ 790 in.-lbs. | 1.1 | 17 1/4" | 9 1/2" | 10 3/4" | 1" | 2 1/8" | 2.48" | IP54 | 0000000 | 00000000 |
| 1/2 | 13 rpm to 77 rpm @ 405 in.-lbs. | 1.1 | 16" | 9" | 10" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
| 1 | 1.8 rpm to 11 rpm @ 5,750 in.-lbs. | 1.7 | 23 1/4" | 13 1/2" | 13 1/2" | 2" | 4 1/8" | 7.09" | IP54 | 0000000 | 00000000 |
| 1 | 4.9 rpm to 30 rpm @ 2,120 in.-lbs. | 1.7 | 20 1/2" | 11" | 11 3/4" | 1 3/8" | 2 7/8" | 4.41" | IP54 | 0000000 | 00000000 |
| 1 | 6.4 rpm to 39 rpm @ 1,620 in.-lbs. | 1.7 | 21" | 10 1/2" | 12 1/2" | 1 1/4" | 2 1/2" | 3.15" | IP54 | 0000000 | 00000000 |
| 1 | 18 rpm to 107 rpm @ 595 in.-lbs. | 1.7 | 18" | 9" | 10 1/2" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
Right-Hand Output Shaft | |||||||||||
240 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.9 rpm to 12 rpm @ 2,660 in.-lbs. | 1.9 | 19" | 12" | 12" | 1 3/8" | 2 7/8" | 5.2" | IP54 | 0000000 | 00000000 |
| 1/2 | 4.8 rpm to 29 rpm @ 1,080 in.-lbs. | 1.9 | 17 1/4" | 8 1/2" | 11" | 1" | 2 1/8" | 3.94" | IP54 | 0000000 | 00000000 |
| 1/2 | 7.6 rpm to 46 rpm @ 680 in.-lbs. | 1.9 | 17 1/4" | 8 1/2" | 10 3/4" | 1" | 2 1/8" | 2.48" | IP54 | 0000000 | 00000000 |
| 1/2 | 24 rpm to 144 rpm @ 220 in.-lbs. | 1.9 | 16" | 8 1/2" | 10" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
| 1 | 1.9 rpm to 12 rpm @ 5,750 in.-lbs. | 3.5 | 23 1/4" | 12" | 13 1/2" | 2" | 4 1/8" | 7.09" | IP54 | 0000000 | 00000000 |
| 1 | 4.8 rpm to 29 rpm @ 2,120 in.-lbs. | 3.5 | 20 1/2" | 9" | 11 3/4" | 1 3/8" | 2 7/8" | 4.41" | IP54 | 0000000 | 00000000 |
| 1 | 7.6 rpm to 46 rpm @ 1,350 in.-lbs. | 3.5 | 21" | 8 1/2" | 12 1/2" | 1 1/4" | 2 1/2" | 3.15" | IP54 | 0000000 | 00000000 |
| 1 | 24 rpm to 144 rpm @ 445 in.-lbs. | 3.5 | 18" | 8 1/2" | 10 1/2" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
460 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.9 rpm to 12 rpm @ 2,660 in.-lbs. | 1.1 | 19" | 12" | 12" | 1 3/8" | 2 7/8" | 5.2" | IP54 | 0000000 | 00000000 |
| 1/2 | 4.8 rpm to 29 rpm @ 1,080 in.-lbs. | 1.1 | 17 1/4" | 8 1/2" | 11" | 1" | 2 1/8" | 3.94" | IP54 | 0000000 | 00000000 |
| 1/2 | 6.5 rpm to 40 rpm @ 790 in.-lbs. | 1.1 | 17 1/4" | 8 1/2" | 10 3/4" | 1" | 2 1/8" | 2.48" | IP54 | 0000000 | 00000000 |
| 1/2 | 13 rpm to 77 rpm @ 405 in.-lbs. | 1.1 | 16" | 8 1/2" | 10" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
| 1 | 1.8 rpm to 11 rpm @ 5,750 in.-lbs. | 1.7 | 23 1/4" | 12" | 13 1/2" | 2" | 4 1/8" | 7.09" | IP54 | 0000000 | 00000000 |
| 1 | 4.9 rpm to 30 rpm @ 2,120 in.-lbs. | 1.7 | 20 1/2" | 9" | 11 3/4" | 1 3/8" | 2 7/8" | 4.41" | IP54 | 0000000 | 00000000 |
| 1 | 6.4 rpm to 39 rpm @ 1,620 in.-lbs. | 1.7 | 21" | 8 1/2" | 12 1/2" | 1 1/4" | 2 1/2" | 3.15" | IP54 | 0000000 | 00000000 |
| 1 | 18 rpm to 107 rpm @ 595 in.-lbs. | 1.7 | 18" | 8 1/2" | 10 1/2" | 3/4" | 1 5/8" | 1.97" | IP54 | 0000000 | 00000000 |
Speed-Control AC Gearmotors
Start, stop, reverse direction, and control the speed of these gearmotors from the mounted keypad. Because you can fine tune output speed and direction, these gearmotors are often used in material processing and handling applications, such as controlling the speed of a mixer or conveyor. These gearmotors are both a motor and speed reducer in one to lower speed while increasing torque. All transmit motion inline with the motor. Secure them to flat surfaces with the base mount. These gearmotors have a TEFC (totally enclosed fan cooled) enclosure that protects better than ODP (open drip proof) enclosures. They are not airtight but can be used in dirty, dusty, and damp environments. To keep the motor cool, they have an external fan that blows air over the outside of the motor.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Speed Range @ Continuous Operating Torque | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Environmental Rating | Each | |
240 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.6 rpm to 9.9 rpm @ 3,190 in.-lbs. | 1.9 | 19 1/4" | 9 1/4" | 11 1/2" | 1 3/8" | 2 3/4" | 4 1/2" | IP54 | 0000000 | 000000000 |
| 1/2 | 5 rpm to 30 rpm @ 1,030 in.-lbs. | 1.9 | 17 1/4" | 8 1/2" | 10 1/2" | 1" | 2" | 3 1/2" | IP54 | 0000000 | 00000000 |
| 1/2 | 8.8 rpm to 53 rpm @ 585 in.-lbs. | 1.9 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1/2 | 24 rpm to 148 rpm @ 210 in.-lbs. | 1.9 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1/2 | 49 rpm to 295 rpm @ 106 in.-lbs. | 1.9 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1 | 1.9 rpm to 12 rpm @ 5,440 in.-lbs. | 3.5 | 22 1/2" | 9 3/4" | 12 1/2" | 1 1/2" | 3 1/8" | 5 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 4.9 rpm to 30 rpm @ 2,120 in.-lbs. | 3.5 | 20 1/4" | 8 3/4" | 11 1/2" | 1 1/8" | 2 3/8" | 4 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 8.6 rpm to 52 rpm @ 1,210 in.-lbs. | 3.5 | 19 1/4" | 8 1/2" | 10 3/4" | 1" | 2" | 3 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 24 rpm to 148 rpm @ 425 in.-lbs. | 3.5 | 17 3/4" | 8 1/4" | 10 1/2" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1 | 49 rpm to 295 rpm @ 210 in.-lbs. | 3.5 | 17 3/4" | 8 1/4" | 10 1/2" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
460 Volts AC, Three Phase | |||||||||||
| 1/2 | 1.6 rpm to 9.9 rpm @ 3,190 in.-lbs. | 1.1 | 19 1/4" | 9 1/4" | 11 1/2" | 1 3/8" | 2 3/4" | 4 1/2" | IP54 | 0000000 | 00000000 |
| 1/2 | 5 rpm to 30 rpm @ 1,030 in.-lbs. | 1.1 | 17 1/4" | 8 1/2" | 10 1/2" | 1" | 2" | 3 1/2" | IP54 | 0000000 | 00000000 |
| 1/2 | 8.8 rpm to 53 rpm @ 585 in.-lbs. | 1.1 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1/2 | 24 rpm to 148 rpm @ 210 in.-lbs. | 1.1 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1/2 | 49 rpm to 295 rpm @ 106 in.-lbs. | 1.1 | 15 3/4" | 8" | 10 1/4" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1 | 1.9 rpm to 12 rpm @ 5,440 in.-lbs. | 1.7 | 22 1/2" | 9 3/4" | 12 1/2" | 1 1/2" | 3 1/8" | 5 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 4.9 rpm to 30 rpm @ 2,120 in.-lbs. | 1.7 | 20 1/4" | 8 3/4" | 11 1/2" | 1 1/8" | 2 3/8" | 4 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 8.6 rpm to 52 rpm @ 1,210 in.-lbs. | 1.7 | 19 1/4" | 8 1/2" | 10 3/4" | 1" | 2" | 3 1/2" | IP54 | 0000000 | 00000000 |
| 1 | 24 rpm to 148 rpm @ 425 in.-lbs. | 1.7 | 17 3/4" | 8 1/4" | 10 1/2" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |
| 1 | 49 rpm to 295 rpm @ 210 in.-lbs. | 1.7 | 17 3/4" | 8 1/4" | 10 1/2" | 3/4" | 1 1/2" | 3" | IP54 | 0000000 | 00000000 |