Rams for Hydraulic Jacks
Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style B-D rams lift or push material. Style D rams have an unthreaded hole through the center that can be used to create a pulling action. Run a threaded rod through the bottom of the ram and fasten or weld the rod to the material you are trying to pull. Often used to free stuck parts.
Rams with collar threads are threaded at the top of the ram for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | tons | lbs. | Ht. | Max. Lift | Ram Oil Capacity, cu. in. | Dia. | Ram Collar Thread Size  | Ram Center Hole Dia. | Max. Pressure, psi | Pipe Size | Thread Type | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| D | 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 8.3 | 2 3/4" | 2 3/4"-16 | 3/4" | 10,000 | 3/8 | NPTF | No | 2 | 5/16" | 0000000 | 000000000 |
| D | 20 | 40,000 | 6 1/2"-8 1/2" | 2" | 9.4 | 3 7/8" | 3 7/8"-12 | 1" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 18 | 4 1/2" | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 30 | 60,000 | 13"-19 1/8" | 6 1/8" | 44.2 | 4 1/2" | 4 1/2"-12 | 1 1/4" | 10,000 | 3/8 | NPTF | No | 2 | 3/8" | 0000000 | 00000000 |
| D | 60 | 120,000 | 9 3/4"-12 3/4" | 3" | 38.2 | 6 1/4" | 6 1/4"-12 | 2 1/8" | 10,000 | 3/8 | NPTF | No | 2 | 1/2" | 0000000 | 00000000 |
Hydraulic Jacks
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Jacks with ram center hole have an unthreaded hole for attaching a threaded rod so you can use them in pulling applications.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Center Hole Dia. | Collar Thread Size | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Each | |
| 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 10,000 | 2 3/4" | 3/4" | 2 3/4"-16 | 8.3 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | 0000000 | 000000000 |
| 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 10,000 | 4 1/2" | 1 1/4" | 4 1/2"-12 | 18 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | 0000000 | 00000000 |