We will reply to your message within an hour.
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
Cut keyways at the edges of existing holes. Also known as a keyway nibbler.
Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.
Use a wrench to cut DIN-size holes in steel up to 1/16" thick.
Cut DIN-size holes in steel up to 7/64" thick using a driver ram and hydraulic pump.
These steel punches cut through aluminum and steel fast to make openings for DB connectors.
The driver supplies eight tons of force to the hole punches in this set to make straight punches.
Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.
Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.
The included hydraulic driver allows you to punch conduit up to size 2.
Punch conduit up to size 1 1/4.
About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.
These punches are half the size of standard portable lever-operated punches. They come with punches and dies in varying sizes.
Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.
These medium duty tools have more than double the punching force of compact portable lever-operated punches.
A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.
Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.
Roller bearings in the lever provide low-effort punching.
Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.
Our strongest punch, this tool has 35 tons of force to punch through tough materials such as bus bars, railings, and I-beams.
These standard saws have high-speed steel teeth.
The carbide teeth on these saws last up to twice as long as high-speed steel teeth.
Specially designed teeth cut faster than the teeth on standard hole saws.
Quickly connect these saws to your drill or drill press with the built-in arbor.
These saws have high-speed steel teeth.
The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.
These high-speed steel saws cuts through aluminum, brass, bronze, and steel.
Cut through spot welds on sheet metal and make faster, more precise cuts than drill bits and other hole saws.
Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.
The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.
Attach these saws to your portable drill to cut a range of large diameter hole sizes in sheet metal.
Use these saws with a drill press to cut a variety of hole sizes in sheet metal.
The saws in these kits have carbide-tipped teeth—the hardest in our hole saw offering—so they stay sharp up to twice as long as saws with high-speed steel teeth.
Cut perfectly round holes in a variety of diameters.
Quickly cut perfectly round holes in multiple sizes—these kits come with at least six hole saws in different diameters.
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets.
Combine the cutting base and a corner punch to make rounded corners in sheet metal.
Create flares around already-cut holes in sheet metal up to 3/16" thick to make the edges stronger and more rigid. Also known as dimple dies.
Transform round holes into finely finished hex-shaped holes.
Used in CNC and milling machines, these broaches turn round holes into hexagonal ones with more accuracy than traditional push broaches.
Changing round holes into a square shape more accurately than traditional push broaches, these broaches go in CNC and milling machines.