The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Hold workpieces of different thicknesses without adjustment.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Two sets of mounting holes allow mounting on the bottom or side.

The handle locks in a horizontal position for more clearance above the clamp.

Replace worn screws or customize your clamps.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

Mount the base to a work surface using screws.

Fit the draw arm over a latch plate and pull the handle to clamp.

Push the lever to lock the handle and prevent accidental opening.

Mount to the top of your workbench.

Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

Use with T-slot nuts or bolts and a support to secure a workpiece, vise, or fixture to a machine table.

The offset shape provides more clearance above the nut than standard clamps. Also known as gooseneck clamps.

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

Get everything needed for basic workholding on a machine table.

Unlike other setup clamps that grip the horizontal surface of a workpiece, these clamps have a pivoting ball in the tip to get a firm hold on angled parts.

Use these clamps to hold large round parts for machining. Each clamp comes with five lengths of chain that combine to accommodate different size workpieces.

The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces.

Also known as press screws, mount these clamps through a drilled hole and turn the crank to move the jaw end of the screw in and out.

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Screw these clamps directly into a tapped hole in a fixture.