About Door Closers
When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.
If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.
There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.
Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.
Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.
Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.
About Hinges
More
Hold-Closed Half-Mortise Concealed Cabinet Hinges
Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch. Also known as European hinges, only one cutout (mortise) is needed for these hinges—mount the frame leaf to the inside cabinet wall and mount the door leaf into a recessed cutout (mortise) on the inside of the cabinet door. Once mounted, the hinges will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Nickel-plated steel hinges have mild corrosion resistance. These hinges also have a quick-release clip for easy door removal.
304 stainless steel hinges are more corrosion resistant than nickel-plated steel. They also have good chemical resistance.
Hinges for overlay doors are for doors that cover their frame.
Hinges for half overlay doors are for doors that cover half of their frame.
For technical drawings and 3-D models, click on a part number.
For Cutout | Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dp. | Dia. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Features | Each | |
For Overlay Door—Hold Closed | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 2 1/4" | 2 7/8" | 4 11/32" | 100° | 15 | Steel | Yes | 4 | Countersunk | Quick-Release Clip | 000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/8" | 1 1/2" | 1 7/8" | 2 3/16" | 3 11/16" | 100° | 11 | 304 Stainless Steel | Yes | 4 | Straight | __ | 00000000 | 00000 |
For Half Overlay Door—Hold Closed | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 2 1/4" | 2 7/8" | 4 11/32" | 100° | 15 | Steel | Yes | 4 | Countersunk | Quick-Release Clip | 0000000 | 0000 |
304 Stainless Steel—Polished | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/8" | 1 1/2" | 1 7/8" | 2 3/16" | 3 11/16" | 100° | 11 | 304 Stainless Steel | Yes | 4 | Straight | __ | 00000000 | 00000 |
Half-Mortise Concealed Cabinet Hinges
Also known as European hinges, only one cutout (mortise) is needed for these hinges—mount the frame leaf to the inside cabinet wall and mount the door leaf into a recessed cutout (mortise) on the inside of the cabinet door. Once mounted, the hinges will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Nickel-plated steel hinges have mild corrosion resistance. These hinges also have a quick-release clip for easy door removal.
304 stainless steel hinges are more corrosion resistant than nickel-plated steel. They also have good chemical resistance.
Hinges for overlay doors are for doors that cover their frame.
Hinges for half overlay doors are for doors that cover half of their frame.
For technical drawings and 3-D models, click on a part number.
For Cutout | Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dp. | Dia. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Features | Each | |
For Overlay Door—Standard | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 2 1/4" | 2 15/16" | 4 11/32" | 100° | 15 | Steel | Yes | 4 | Countersunk | Quick-Release Clip | 000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/8" | 1 1/2" | 1 7/8" | 2 3/16" | 3 11/16" | 100° | 11 | 304 Stainless Steel | Yes | 4 | Straight | __ | 00000000 | 00000 |
For Half Overlay Door—Standard | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 2 1/4" | 2 15/16" | 4 11/32" | 100° | 15 | Steel | Yes | 4 | Countersunk | Quick-Release Clip | 000000 | 0000 |
304 Stainless Steel—Polished | |||||||||||||||
| 7/16" | 1 3/8" | 2 1/8" | 1 1/2" | 1 7/8" | 2 3/16" | 3 11/16" | 100° | 11 | 304 Stainless Steel | Yes | 4 | Straight | __ | 00000000 | 00000 |
Sectional Door Hinges
Designed to fit most overhead sectional doors, such as garage doors, these hinges are sized to industry standards. They all have a nonremovable pin to deter tampering.
For technical drawings and 3-D models, click on a part number.
| Garage Door Hinge Trade Size | Lg. | Wd. | Ht. | Range of Motion | Pin Material | Mounting Fasteners Included | Mounting Screw Size | No. of Mounting Holes | Mounting Hole Style | Each | |
Galvanized Steel—Dull | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
0.12" Leaf Thick. | |||||||||||
| 9 | 7 3/8" | 2 13/16" | 3 3/8" | 100° | Steel | No | 1/4" | 9 | Straight | 00000000 | 000000 |
High-Traffic Door Closers with Built-In Stop
A built-in stop prevents doors from opening too far—good when wall- or floor-stops can’t be used. Designed for frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. These closers are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.
Free-moving closers pull doors shut after you've opened them.
Hold-open closers hold doors open until you close them with a slight push or pull on the door.
For Door Wd. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Door Mount Opening Direction | Range of Motion | Mounting Hardware Included | Specifications Met | Choose a Finish | Each | |
LCN 1460/1461 | ||||||||||
| 24"-60" | 24"-48" | Reversible | Free Moving | Opens Out | 100° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 0000000 | 0000000 | |
| 24"-60" | 24"-48" | Reversible | Hold Open | Opens Out | 100° | Yes | ANSI A156.4 Grade 1 | 0000000 | 000000 | |