About Hinges
More
About Rod Ends
More
Narrow-Profile Lift-Off Hinges without Holes
Range of
Motion
Hinge with 360°
Range of Motion
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Hinges with a 360° range of motion have a small triangular surface to weld to the door frame. Hinges with a 270° range of motion have a body that welds directly to the door frame.
304 stainless steel hinges are more corrosion resistant than low-carbon steel. They also have good chemical resistance.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Hinges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Replacement Bushings | ||||||||||
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Pin Dia. | Material | Pin Material | Each | Each | ||
Low-Carbon Steel—Dull | ||||||||||||
| 1 5/16" | 7/16" | 1 11/32" | 7/16" | 7/16" | 360° | 15/64" | Low-Carbon Steel | Steel | 0000000 | 00000 | 00000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||||
| 1 5/16" | 7/16" | 1 11/32" | 7/16" | 7/16" | 360° | 15/64" | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 0000 | 00000000 | 0000 |
Aluminum—Dull | ||||||||||||
| 1 3/8" | 7/16" | 1 3/8" | 7/16" | 7/16" | 360° | 15/64" | 5052 Aluminum | Stainless Steel | 000000 | 0000 | 00000000 | 0000 |
Miniature Hinges
With leaf heights under 1/4", these tiny hinges are the smallest we offer. All have a nonremovable pin to deter tampering.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | 1-9 | 10-Up | |
Brass—Dull | |||||||||
| 1/8" | 7/32" | 1/8" | 7/32" | 7/16" | 0.036" | 180° | 0000000 | 000000 | 000000 |
Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-32 | 5/32" | 30° | 7/16" | 1/4" | 1" | 9/16" | Not Rated | Carbon Steel | Right Hand | 00000000 | 000000 |
Internally Threaded Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-32 | 5/32" | 30° | 7/16" | 5/16" | 7/8" | 3/8" | Not Rated | Carbon Steel | Right Hand | 00000000 | 000000 |
Corrosion-Resistant Clevis Rod Ends
These clevis rod ends offer more corrosion resistance than standard steel clevis rod ends. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
Zinc-plated steel rod ends offer moderate corrosion resistance. Stainless steel rod ends offer excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Zinc-Plated Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 10-32 | 3/16" | 3/16" | 7/16" | 1 9/16" | 9/16" | 1" | 58,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 000000 |
316 Stainless Steel | |||||||||||
| 10-24 | 3/16" | 3/16" | 7/16" | 1 9/16" | 9/16" | 1" | 80,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 0000 |
Clevis Rod Ends
These steel rod ends are machined to SAE standards. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 10-32 | 3/16" | 3/16" | 7/16" | 1 9/16" | 9/16" | 1" | 58,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 00000 |