About Hinges
More
About Rod Ends
More
Narrow-Profile Lift-Off Hinges without Holes
Hinge with 360°
Range of Motion
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Hinges with a 360° range of motion have a small triangular surface to weld to the door frame. Hinges with a 270° range of motion have a body that welds directly to the door frame.
304 stainless steel hinges are more corrosion resistant than low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Hinges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Replacement Bushings | ||||||||||
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Pin Dia. | Material | Pin Material | Each | Each | ||
Low-Carbon Steel—Dull | ||||||||||||
| 2 29/32" | 25/32" | 2 15/16" | 25/32" | 25/32" | 360° | 1/2" | Low-Carbon Steel | Steel | 0000000 | 000000 | 00000000 | 00000 |
| 3 15/32" | 25/32" | 3 17/32" | 25/32" | 25/32" | 360° | 1/2" | Low-Carbon Steel | Steel | 0000000 | 00000 | 00000000 | 0000 |
304 Stainless Steel—Dull | ||||||||||||
| 2 7/8" | 25/32" | 2 15/16" | 25/32" | 25/32" | 360° | 1/2" | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 00000 | 00000000 | 0000 |
Easy-Lube Narrow-Profile Lift-Off Hinges without Holes
Hinge with 360°
Range of Motion
A grease fitting makes these hinges easy to lubricate. Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. All of the hinges have a small triangular surface to weld to the door frame.
For technical drawings and 3-D models, click on a part number.
Hinges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Replacement Bushings | ||||||||||
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Pin Dia. | Material | Pin Material | Each | Each | ||
Low-Carbon Steel—Dull | ||||||||||||
| 2 15/16" | 25/32" | 2 15/16" | 25/32" | 25/32" | 360° | 1/2" | Low-Carbon Steel | Brass | 000000 | 000000 | 00000000 | 00000 |
| 3 17/32" | 25/32" | 3 17/32" | 25/32" | 25/32" | 360° | 1/2" | Low-Carbon Steel | Brass | 000000 | 00000 | 00000000 | 0000 |
High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Rod ends are made of cadmium- or zinc-plated steel, which both offer moderate corrosion resistance. Seals keep lubricant in and dirt out.
Cadmium-plated steel rod ends have lubricant that meets MIL-PRF-81322. They won’t require ongoing lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 10-32 | 3/16" | 20° | 25/32" | 7/16" | 1 3/8" | 3/4" | 1,000 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 0000000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8"-24 | 3/8" | 13/32" | 25/32" | 1 9/16" | 19/32" | 25/32" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 000000 |