Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line.

These hinges are made of metal.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

Lock these hinges open at any angle within their range of motion.

Choose these hinges for their adherence to strict military standards for material and construction.

Made of carbon fiber, these hinges are as strong as aluminum yet lighter in weight. All have leaves that are connected by a strip of flexible Kevlar instead of a pin.

Mounting slots allow door alignment adjustments during and after hinge installation.

When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim.

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

With at least 55° of ball swivel, these externally threaded rod ends accommodate greater misalignment than any other we offer.

Seals keep out dirt and an oil-embedded foam insert slowly releases lubricant for a long life.

Made of cadmium-plated steel, these internally threaded rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

These internally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

Good for general purpose applications where corrosion and high strength aren’t a concern, these rod end bolts are made of carbon steel.