About Rod Ends
More
Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate during installation and on an ongoing basis.
Zinc-plated steel rod ends provide moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M5 × 0.8 mm | 5mm | 14° | 16mm | 8mm | 33mm | 20mm | 1,150 | Zinc-Plated Carbon Steel | 00000000 | 000000 | |
Internally Threaded Ball Joint Rod Ends
Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.
Zinc-plated steel rod ends provide moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M5 × 0.8 mm | 5mm | 14° | 16mm | 8mm | 27mm | 14mm | 1,550 | Zinc-Plated Carbon Steel | 00000000 | 000000 | |
Lubrication-Free Ball Joint Rod Ends
A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| M5 × 0.8 mm | 5mm | 14° | 16mm | 8mm | 33mm | 20mm | 2,800 | Zinc-Plated Alloy Steel | 00000000 | 000000 |
Internally Threaded Lubrication-Free Ball Joint Rod Ends
A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends. All are zinc plated, so they resist corrosion for a short time before the finish is consumed and the steel is exposed.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| M5 × 0.8 mm | 5mm | 14° | 16mm | 8mm | 27mm | 14mm | 3,650 | Zinc-Plated Chrome-Moly Steel | Right Hand | 00000000 | 000000 |
Extended-Life Ball Joint Rod Ends
Seals keep out dirt and an oil-embedded foam insert slowly releases lubricant for a long life. You can remove the insert to add more oil if it starts to run dry. These rod ends have an eyelet and a ball that swivels to support angular misalignment. Made of zinc-plated steel, they have moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| M5 × 0.8 mm | 5mm | 22° | 16mm | 9mm | 33mm | 20mm | 1,150 | Zinc-Plated Carbon Steel | 0000000 | 000000 |
Corrosion-Resistant Ball Joint Rod Ends
Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| M5 × 0.8 mm | 5mm | 22° | 16mm | 8mm | 33mm | 20mm | 910 | 303 Stainless Steel | 0000000 | 000000 |
Internally Threaded Corrosion-Resistant Ball Joint Rod Ends
Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| M5 × 0.8 mm | 5mm | 22° | 16mm | 8mm | 27mm | 14mm | 920 | 303 Stainless Steel | 0000000 | 000000 |
Corrosion-Resistant Flat-Shoulder Rod End Bolts
Made of stainless steel, these rod end bolts are stronger and more corrosion resistant than our standard flat-shoulder rod end bolts. Also known as jig latch bolts, they mount flush to any flat surface.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Shank Threading | O'all Thick. | Tensile Strength, psi | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| M8 × 1.25 mm | 8mm | 16mm | 50mm | 35mm | Partially Threaded | 8mm | 100,000 | 303 Stainless Steel | 0000000 | 000000 |
Flat-Shoulder Rod End Bolts
These black-oxide carbon steel rod end bolts are heat treated for added strength. Also known as jig latch bolts, they mount flush to any flat surface.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Shank Threading | O'all Thick. | Tensile Strength, psi | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| M8 × 1.25 mm | 8mm | 16mm | 50mm | 35mm | Partially Threaded | 8mm | 78,000 | Black-Oxide Carbon Steel | 0000000 | 000000 |
Corrosion-Resistant Clevis Rod Ends
These clevis rod ends offer more corrosion resistance than standard steel clevis rod ends. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
Stainless steel rod ends offer excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
316 Stainless Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M6 × 1 mm | 6mm | 7mm | 16mm | 51mm | 19mm | 32mm | 80,000 | Clevis Pin, Cotter Pin | Right Hand | 0000000 | 000000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 × 1.25 mm | 8mm | 8mm | 16mm | 32mm | 12mm | 16mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 000000 |
Clevis Rod Ends
These steel rod ends are machined to SAE standards. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 × 1.25mm | 8mm | 8mm | 16mm | 32mm | 16mm | 16mm | Not Rated | Snap-On Spring Clevis Pin | Right Hand | 0000000 | 000000 |
Easy-Adapt Clevis Rod Ends
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Specifications Met | Each | |
Zinc-Plated Carbon Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 × 1.25 mm | 8mm | 8mm | 16mm | 31.75mm | 16mm | 16mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 00000 |
| M8 × 1.25 mm | 8mm | 8mm | 16mm | 48mm | 16mm | 32mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 0000 |