About Rod Ends
More
Ultra-Precision Ball Joint Rod Ends
Made to extremely tight tolerances, these rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages. Rod ends are steel and generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They have a heat-treated steel ball for added strength and a brass insert for smooth operation. They don't come lubricated, so you'll need to lubricate during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size  | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| 6-32 | 1/8" | 16° | 15/32" | 1/4" | 15/16" | 1/2" | 450 | Carbon Steel | Right Hand | 00000000 | 0000000 |
Internally Threaded Ultra-Precision Ball Joint Rod Ends
Made to extremely tight tolerances, these rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages. Rod ends are steel and generally handle higher loads than stainless steel, aluminum, and nylon rod ends. They have a heat-treated steel ball for added strength and a brass insert for smooth operation. They come lubricated, so you won't need to lubricate them at installation. They will require ongoing lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Shank Thread Direction | Each | |
| 6-32 | 1/8" | 16° | 15/32" | 1/4" | 13/16" | 3/8" | 1,200 | Carbon Steel | Right Hand | 00000000 | 0000000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-28 | 1/4" | 1/4" | 15/32" | 15/16" | 11/32" | 15/32" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 00000 |