Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights. They're sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies.

These lights have a low profile for fitting into tight spaces. They also have a durable polyester plastic lens that won't yellow over time and a daylight appearance that highlights white/blue tones, which is good for inspecting. Use a power cord to operate (sold separately; see 4-pole micro M12 socket with 12-ft. wire leads). All lights meet IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, as well as IP69K to withstand high-temperature, high-pressure washdowns often used in sanitizing.

Wire together the ends of cascadable lights to create a long row to illuminate your workspace. Rows of cascadable lights must have a non-cascadable aluminum housing light at the end of the chain to connect to power. Cascadable lights connect to each other and to a non-cascadable light with 4-pole micro M12 sockets.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a daylight appearance that highlights white/blue tones, which is good for inspecting. These lights have a durable polyester lens that won't turn yellow over time. They meet IP66, IP67, and IP69K.

These lights require a power cord to operate (sold separately; see 4-pole micro M12 socket with 12-ft. wire leads).

Warm, cure, and dry from as far away as 8 ft. These lamps are also known as infrared and radiant heaters. Mount them horizontally using the included brackets, which let you tilt the lamps up to 60°.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Mount these lamps to warm, cure, and dry large surfaces, positioning them horizontally 6”-8” from what you want to heat. They are also known as infrared and radiant heaters.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Roll these lamps to your work surface and position the head anywhere along the stand, 18”-30” from what you want to heat. Use for spot-drying paint, adhesive, and other surface coatings and fillers. They’re also known as infrared and radiant heaters.

Adjustable-temperature lamp lets you regulate heat using three switch controls and up to seven bulbs (not included). Lamp is not for use with water-based primers and paint.

Fixed-temperature lamps have a head that rotates for horizontal or vertical positioning.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Position these lamps at any angle to heat, dry, soften, or defrost. They’re also known as infrared and radiant heaters.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.