High-Speed Steel End Mills

Filter by

Material

System of Measurement

Mill Diameter

Cut Style

For Use On

Shank Diameter

Number of Flutes

Length of Cut

Overall Length

Number of Milling Ends

End Mill Type

Finish

Taper Angle per Side

Sold As

Shank Type

Cut Radius

Helix Angle

Flute Type

Mill Thickness

Cutting Angle

Flute Spacing

REACH Compliance

RoHS Compliance

Forward

How can we improve?

1,980 Products

End Mills and Milling Cutters

High-Speed Steel Square End Mills

Use these end mills for short runs and general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Roughing High-Speed Steel Square End Mills

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Undersize-Tolerance High-Speed
Steel Square End Mills

Commonly used to make keyways in rotary shafts, these tools have a -0.0015" to 0.0000" mill diameter tolerance for creating a precise fit.

High-Speed Steel Square End Mills
for Aluminum, Brass, and Bronze

With a higher helix angle than standard high-speed steel end mills, these clear more chips and generate less heat, making them good for milling soft material, such as aluminum, brass and bronze.

High-Speed Steel Square End
Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Cobalt Steel Square End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

Roughing Cobalt Steel Square End Mills

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Roughing Cobalt Steel Square End
Mills for Aluminum, Brass, and Bronze

A higher helix angle means these end mills clear more chips than other roughing cobalt steel end mills, making them better for milling aluminum, brass, and bronze. Serrations along the cutting edge act as chip breakers, so they can remove large amounts of material at high speeds.

Cobalt Steel Square End Mills with Two Milling Ends

When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

High-Speed Steel Ball End Mills

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

High-Speed Steel Ball End Mills
for Aluminum, Brass, and Bronze

With a higher helix angle than standard high-speed steel end mills, these clear more chips and generate less heat, making them good for milling soft material, such as aluminum, brass and bronze.

High-Speed Steel Ball End
Mills with Two Milling Ends

Cobalt Steel Ball End Mills with Two Milling Ends

High-Speed Steel Tapered Square End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Also known as taper degree end mills, they're often used to machine angled slots in dies and molds.

Cobalt Steel Rounded-Edge Square End Mills

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. Often used for slotting and pocketing cuts in mold and die making, they have a 90° profile and rounded corners, which reduce flute breakage and chipping.

High-Speed Steel Corner-Rounding End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They have scooped corners for rounding the sharp edges of your workpiece.

Cobalt Steel Corner-Rounding End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel end mills run at higher speeds and provide better performance on hard material. They have scooped corners for rounding the sharp edges of your workpiece.

High-Speed Steel Chamfer End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts.

High-Speed Steel Double-Chamfer End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. The teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

Carbide-Tipped Double-Chamfer End Mills

These carbide-tipped end mills provide a sharper, harder cutting edge and better wear resistance than high-speed steel without the brittleness of solid carbide. Their teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

Outside Chamfer End Mills
for Pipes, Tubes, and Rods

Mill an angled edge to the entire outside diameter of pipe, tubes, and rods in a single pass with more speed and precision than a handheld scraper. These end mills deburr pipe and tube for butt welds and shape rods for sliding into housings and holes.

High-Speed Steel Dovetail End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They create dovetail slots for connecting two components with a sliding fit.

Cobalt Steel Dovetail End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel dovetail cutters run at higher speeds and provide better performance on hard material. Use them to create dovetail slots for connecting two components with a sliding fit.

Cobalt Steel Drill/Mill End Mills

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

High-Speed Steel Straight-Tooth Keyseat End Mills

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Cobalt Steel Straight-Tooth Keyseat End Mills

With better heat and wear resistance than high-speed steel, these cobalt steel keyseat cutters can run at higher speeds and provide better performance on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

High-Speed Steel Staggered-Tooth
Keyseat End Mills

Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. An alternating right- and left-hand tooth style allows them to remove more material at high speeds than straight-tooth keyseat cutters.

High-Speed Steel T-Slot End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They're often used to create slots in machine tool tables, indexing tables, and other workholding surfaces.

Carbide-Tipped T-Slot End Mills

Made of carbide-tipped steel, these end mills maintain a sharper, harder edge at high temperatures than high-speed steel. Use them to create slots in machine tool tables, indexing tables, and other workholding surfaces.

High-Speed Steel Convex-Radius End Mills

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. With curved, side-cutting teeth, they create hollow, inward-curving grooves.

Carbide-Tipped Convex-Radius End Mills

Made of carbide-tipped steel, these end mills maintain a sharper, harder edge at high temperatures than high-speed steel. They have curved, side-cutting teeth for creating hollow, inward-curving grooves.

Concave-Radius End Mills

A scalloped profile creates rounded, outward-curving edges.

Arbor-Mount Milling Cutters

Face Milling Cutters

Also known as shell cutters, these high-speed steel cutters are good for face and side milling. They have a large mill diameter for removing a large amount of material per pass.

High-Speed Steel Slitting Saws

These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel.

Smooth-Finish Slitting Saws

Also known as jeweler's slotting saws and metal slitting saws, these saws are good for use on wire, tubing, extrusions, and other very thin material that requires delicate cuts.

Slitting Saws with Side Teeth

With peripheral and side teeth, these saws remove chips for a consistent cutting width.

Gear Cutters

Mill 14½° pressure angle spur gears. Also known as involute gear cutters.

End Mill and Milling Cutter Sets

High-Speed Steel Square End Mill Sets

For general purpose milling in most material, the end mills in these sets have one milling end and a standard shank.

High-Speed Steel Square End
Mill Sets with Two Milling Ends

Offering two times the life of a standard end mill, these have two milling ends so you can switch to the opposite end when one end wears out. Use them for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

High-Speed Steel Ball End Mill Sets

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Router Bits

Straight and Spiral Router Bits for
Wood, Particle Board, and Plywood

Create square slots, pockets, and edges in wood.

Straight and Spiral Router Bits for Aluminum

Also known as O-flute bits, these have a single open flute for efficient chip removal when cutting aluminum. Use them to create square slots, pockets, and edges.

Straight and Spiral Router Bits for Plastic

Cut square slots, pockets, and edges in plastic.

Straight Router Bits for Ceramics

With a diamond coating, these bits resist wear when used on ceramics and other highly abrasive material. All have a square cut style to create slots, pockets, and edges.

V-Groove Router Bits

Carve V-shaped grooves in wood and plastic laminate.

Corner-Rounding Router Bits

Choose from bits that cut rounded, cove, wavy, or Roman ogee corners along the edges of your workpiece.

Flush-Trimming Router Bits

Cut layers of material flush to one another. All bits have a pilot to guide cuts.

Flush-Trimming and Chamfer Router Bits

These bits have a straight cutting edge for flush trimming and an angled cutting edge for making 22° chamfer cuts. They're for use on countertops and other plastic laminate material.

Panel Pilot Router Bits

The pointed tip creates starter holes for efficient plunge cutting in wood.

Chamfer Router Bits

These bits make chamfer, bevel, and other angled cuts in wood.

Slotting Router Bits

With a ball-bearing pilot and wide cutting wings, these bits cut straight and smooth slots into wood.

Rabbet Router Bits

Make square, recessed rabbet cuts for joining wood.

Hinge Mortise Router Bits

Use these bits to create large, shallow recesses in wood, such as mortises for hinge leaves.