About Rod Ends
More
Ball Joint Rod End Inserts
Shown Installed
Washer
Cone
Without changing the ID, these inserts handle some misalignment on rod ends. They attach to your rod end to move your fastener away from the rod-end body.
Washer-style inserts also protect rod ends. They’re commonly known as retaining safety washers.
Cone-style inserts help position rod ends between receiving forks, straps, and clevises.
303 stainless steel inserts won’t rust in wet, humid, and washdown environments.
For technical drawings and 3-D models, click on a part number.
| For Rod End ID | ID | OD | Overall Ht. | Each | |
Washer | |||||
|---|---|---|---|---|---|
Zinc-Plated Carbon Steel | |||||
| 1/4" | 1/4" | 11/16" | 1/8" | 000000000 | 00000 |
| 5/16" | 5/16" | 13/16" | 3/16" | 000000000 | 0000 |
| 3/8" | 3/8" | 15/16" | 3/16" | 000000000 | 0000 |
| 7/16" | 7/16" | 1 1/16" | 1/4" | 000000000 | 00000 |
| 1/2" | 1/2" | 1 1/4" | 1/4" | 000000000 | 0000 |
| 5/8" | 5/8" | 1 7/16" | 1/4" | 000000000 | 0000 |
| 3/4" | 3/4" | 1 5/8" | 5/16" | 000000000 | 00000 |
| 7/8" | 7/8" | 1 7/8" | 5/16" | 000000000 | 00000 |
| 1" | 1" | 2 1/4" | 3/8" | 000000000 | 00000 |
Chrome-Plated Carbon Steel | |||||
| 10mm | 10mm | 16mm | 5mm | 000000000 | 00000 |
| 12mm | 12mm | 20mm | 5mm | 000000000 | 00000 |
303 Stainless Steel  | |||||
| 1/4" | 1/4" | 11/16" | 1/8" | 000000000 | 00000 |
| 5/16" | 5/16" | 13/16" | 3/16" | 000000000 | 00000 |
| 3/8" | 3/8" | 15/16" | 3/16" | 000000000 | 00000 |
| 1/2" | 1/2" | 1 1/4" | 1/4" | 000000000 | 00000 |
| 5/8" | 5/8" | 1 7/16" | 1/4" | 000000000 | 00000 |
| 3/4" | 3/4" | 1 5/8" | 5/16" | 000000000 | 00000 |
Cone | |||||
Chrome-Plated Carbon Steel | |||||
| 3/16" | 3/16" | 1/2" | 5/16" | 000000000 | 00000 |
| 1/4" | 1/4" | 9/16" | 5/16" | 000000000 | 00000 |
| 5/16" | 5/16" | 11/16" | 3/8" | 000000000 | 00000 |
| 1/2" | 1/2" | 1 1/16" | 1/2" | 000000000 | 00000 |
| 5/8" | 5/8" | 1 5/16" | 9/16" | 000000000 | 00000 |
| 3/4" | 3/4" | 1 9/16" | 5/8" | 000000000 | 00000 |
| 7/8" | 7/8" | 1 5/8" | 11/16" | 000000000 | 00000 |
| 1" | 1" | 2" | 9/16" | 000000000 | 00000 |
| 1 1/4" | 1 1/4" | 2 1/4" | 13/16" | 000000000 | 00000 |
| 6mm | 6mm | 14mm | 9mm | 000000000 | 00000 |
| 8mm | 8mm | 17mm | 9mm | 000000000 | 00000 |
| 12mm | 12mm | 25mm | 11mm | 000000000 | 00000 |
Ball Joint Rod End Reducers
Shown Installed
Decrease the ID of your rod end to allow approximately 60° of misalignment. Reducers attach to your rod end to move your fastener away from the rod-end body.
| For Rod End ID | ID | OD | Overall Ht. | Material | Pair | |
| 1/2" | 3/8" | 5/8" | 5/8" | 17-4 PH Stainless Steel | 000000 | 000000 |
| 5/8" | 1/2" | 13/16" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
| 3/4" | 1/2" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
| 3/4" | 5/8" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
| 7/8" | 3/4" | 1 1/16" | 1 1/4" | 17-4 PH Stainless Steel | 000000 | 00000 |
| 1" | 3/4" | 1 1/8" | 1 3/8" | 17-4 PH Stainless Steel | 000000 | 00000 |