About Pipe Size
More
About Pressure Gauges
More
Weld Alignment Inspection Gauges
Measure internal misalignment of pipe ID, pipe wall thickness after tack welding, and go/no-go fit-up gap.
Internal Misalignment of Pipe ID | Pipe Wall Thick. After Tack Welding | ||||||
|---|---|---|---|---|---|---|---|
| Max. Size Measured | Graduation Marks | Max. Thick. Measured | Graduation Marks | Go/No-Go Fit-Up Gap Size Measured Range | Material | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | |||||||
| 1/16", 30 mm | 1/32", 1 mm | 1 3/4", 45mm | 1/16", 1 mm | 1/16"-3/32" | Stainless Steel | 0000000 | 0000000 |
Multicheck Weld Inspection Gauges
Check bevel angles, excess weld metal (capping size), length of a corner-weld leg, throat length, and depth of undercut.
Excess Weld Metal (Capping Size) | Corner-Weld Leg Lg. | Throat Lg. | Dp. of Undercut | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bevel Angle Measured | Max. Size Measured | Graduation Marks | Max. Lg. Measured | Graduation Marks | Max. Lg. Measured | Graduation Marks | Max. Size Measured | Graduation Marks | Material | Includes | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | ||||||||||||
| 0°-60° | 1", 25 mm | 1/16", 1 mm | 1", 25mm | 1/16", 1 mm | 3/4", 20mm | 1/16", 1 mm | 3/16", 5 mm | 1/16", 1 mm | Stainless Steel | Vinyl Carrying Case | 0000000 | 0000000 |
Corner Weld Inspection Gauges
Also known as a fillet gauge, this gauge measures concave and convex corner weld dimensions.
| Radius Measured | Metric Radius Measured, mm | Measures | Material | Includes | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | ||||||
|---|---|---|---|---|---|---|
| 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1" | 3, 5, 6, 8, 10, 11, 13, 16, 19, 22, 25 | Concave Corners, Convex Corners | Steel | Vinyl Carrying Case | 0000000 | 000000 |
Gas Pressure Gauges
Single Scale With Bottom Connection
Bottom Connection
Use these gauges with pumps, filters, regulators, and in process lines to monitor the pressure of compressed gas. Mount them with the dial face upright. Gauges for use with acetylene can also be used in welding applications.
Gauges with brass case are cleaned to meet ASME B40.1, Level IV for oxygen service.
For technical drawings and 3-D models, click on a part number.
Brass Case with Brass Connection—Single Scale (psi)
- For Use With: Air, Acetylene, Carbon Dioxide, and Oxygen
- Accuracy: ±2% Mid Scale (Grade B)
Available Pressure Ranges | ||
|---|---|---|
| Pressure Range, psi | Graduation Marks, psi | Numeric Increments, psi |
| 0 to 30 | 1 | 5 |
| 0 to 60 | 1 | 10 |
| 0 to 100 | 2 | 20 |
| 0 to 200 | 5 | 40 |
| 0 to 400 | 10 | 50 |
| 0 to 600 | 10 | 100 |
| 0 to 1,000 | 20 | 200 |
| 0 to 2,000 | 50 | 400 |
| 0 to 3,000 | 50 | 500 |
| 0 to 4,000 | 100 | 500 |