We will reply to your message within an hour.
More
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
An aluminum shell adds strength.
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.
A metal shell adds strength.
Reduce your carbon footprint without sacrificing performance. Made of recycled thermoplastic, these bearings are a sustainable alternative to standard plastic dry-running bearings.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.
A metal backing adds strength.
Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.
With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.
Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.
Thick, tapered rollers stand up to extremely high thrust loads.
With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.
Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.
In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.
A split housing means you can remove the top half of these bearings to inspect or repair shafts and components. This reduces downtime and minimizes the risk of damaging surrounding components.
Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.
Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.
With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.
With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.
With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.
With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.
Despite their size, these rollers handle high radial load capacities without sacrificing speed.
Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.
A handle on the side of the carriage locks the carriage in place.
With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.
Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.
Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.
Steel construction and greater horsepower give these conveyors higher capacities and speeds than standard Ready-to-Run Mini Belt Conveyors.
Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel making them suitable for washdown applications.
These rollers have 2 1/2" or 3 1/2" diameters.
Move pallets, drums, racks, and other heavy items around your facility with these conveyors.
For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors.
Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts.
Also known as bearing movers, air casters, and air bearings, these dollies float loads on a cushion of air. They work well on large, unevenly distributed loads.
These internally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.
These externally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.