Fold the ring handle into the recess to stay out of the way when not in use. It lays flat so you won’t bump into these latches or catch clothes on them. The latches project further into enclosures than other latches without a recess. To open them, pull the ring with your finger. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression. The second turn also reduces rattling from vibration.

Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal. A gasket helps keep low-pressure washdowns and dust from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. Made of stainless steel, these latches won’t rust in areas that are constantly exposed to moisture.

All of these latches include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. The latch installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.

For technical drawings and 3-D models, click on a part number.

With a molded inset grip, the handle remains recessed to stay out of the way. Choose these locks if you need locks that each open with a different key.

For technical drawings and 3-D models, click on a part number.

Fold the ring handle into the recess to stay out of the way when not in use. It lays flat so you won’t bump into these latches or catch clothes on them. The latches project further into enclosures than other latches without a recess. To open them, pull the ring with your finger. Turn the head a quarter turn to lock, then push it down to create compression and minimize rattling from vibration.

Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal. A gasket helps keep low-pressure washdowns and dust from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. Made of stainless steel, these latches won’t rust in areas that are constantly exposed to moisture. Choose them if you need locks that each open with a different key.

All of these latches include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. The latch installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.

For technical drawings and 3-D models, click on a part number.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down into the recess to create compression and minimize rattling from vibration. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The handle lays flat and out of the way in the recess, so you won’t bump into these locks or catch clothes on them. However, the locks project further into enclosures than other locks without a recess. Choose them if you need several locks that open with the same key.

These locks include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

Aluminum locks are less corrosion resistant than stainless steel, but they are lighter in weight.

Stainless steel locks are more corrosion resistant than aluminum locks. They won’t rust in areas that are constantly exposed to moisture.

For technical drawings and 3-D models, click on a part number.

Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately).

The T-handle on mortise-mount locks lifts and then folds out of the way when not in use.

Multiple-point latch kits have a rod and two rod guides. One guide attaches to the inside surface of your door, while the other attaches to your frame to create a latching point.

For technical drawings and 3-D models, click on a part number.

Use these latches alone for single-point latching. Add latch kits for multiple-point latching to create additional holding power.

Style A-C latches arrive ready for single-point latching; add a latch kit for two-point latching or two latch kits for three-point latching.

Style C latches have a handle that lifts and then folds out of the way when not in use.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod, two bushings, and two rod guides.

For technical drawings and 3-D models, click on a part number.

Choose these keyed alike locks when you need several that open with the same key. The ring handle is recessed to stay out of the way when not in use. These locks arrive ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the locks when mounting the cam.

For technical drawings and 3-D models, click on a part number.

Use a 5/16" hex key to open and close these locks. They’re good for use on sliding doors. A hole must be drilled in your panel for hex key access when mortise mounting. Capacity is the maximum amount of force the lock can withstand.

Style A has front tab mounting holes for mortise mounting.

Styles B and C have both side and back mounting holes, so they attach to the side of the panel or mortise into the panel.

For technical drawings and 3-D models, click on a part number.

Great where space is a concern, these locks have a spring-loaded ring handle that returns to its recessed position when you release it. Push them closed to lock your door automatically.

Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.

316 stainless steel locks have excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

To prevent snags and accidental bumps, these locks have a recessed grip instead of a standard handle. Put your finger in the recess and slide the lock to open. They keep doors shut when you push them closed. A convenient alternative to cam and draw latches, they don't require you to turn a cam or pull a latch to close. They press into a cutout without tools, so they’re fast and easy to install. However, they only fit a cutout shape that matches the lock. Since they’re keyed alike, they’re good if you need several locks that open with the same key. They meet UL 94 V-0, so they’ll self-extinguish in the event of a fire.

For technical drawings and 3-D models, click on a part number.

For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed. Control the locks with a push-button switch or keypad door control (sold separately). When power is interrupted, they instantly release. All locks must be hardwired.

Flush mount locks mount under the door frame header. For locks with 500 lbs. and 1,500 lbs. of holding strength, a 5/8" thick filler plate (sold separately) is required if the mounting surface on the frame is less than 2" wide.

Locks with instant locking action lock doors as soon as they are closed. Those with delayed locking action lock doors after a set amount of time.

Optional battery backup packs supply power during power interruptions.

For technical drawings and 3-D models, click on a part number.