McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    44 Products

    Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    Hex Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Drill Bits for Masonry and Concrete, Hex Shank for Hammer and Rotary Drilling.
    The hex shape is less likely to slip in the chuck than a round shank. Use simultaneous rotary and hammering action to drill faster and penetrate material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    Standard Point—The most common point type handles most jobs. However, for more aggressive cutting that generates a lot of heat, consider a multipoint or serrated bit.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    No. of
    Flutes
    Flute
    Type
    Each
    Uncoated Carbide-Tipped Steel
     
    Standard Point
    3/16"0.1875"4"1.5"11/64"ANSI B212.152Spiral00000000000
    3/16"0.1875"6"3.88"11/64"ANSI B212.152Spiral00000000000
    3/16"0.1875"8"6"11/64"ANSI B212.152Spiral00000000000
    7/32"0.2188"6"4"3/16"ANSI B212.152Spiral00000000000
    1/4"0.25"4"2"15/64"ANSI B212.152Spiral00000000000
    1/4"0.25"6"4"15/64"ANSI B212.152Spiral0000000000
    1/4"0.25"13 1/2"12"15/64"ANSI B212.152Spiral000000000000
    9/32"0.2813"4"2"1/4"ANSI B212.152Spiral0000000000
    5/16"0.3125"4"2"9/32"ANSI B212.152Spiral0000000000
    5/16"0.3125"6"4"9/32"ANSI B212.152Spiral0000000000
    5/16"0.3125"13 1/2"12"9/32"ANSI B212.152Spiral000000000000
    3/8"0.375"4"2"11/32"ANSI B212.152Spiral0000000000
    3/8"0.375"6"4"11/32"ANSI B212.152Spiral0000000000
    3/8"0.375"12"10"3/8"ANSI B212.152Spiral000000000000
    3/8"0.375"13 1/2"12"11/32"ANSI B212.152Spiral00000000000
    3/8"0.375"18"16"11/32"ANSI B212.152Spiral00000000000
    7/16"0.4375"6"4"3/8"ANSI B212.152Spiral00000000000
    1/2"0.5"4"2"3/8"ANSI B212.152Spiral00000000000
    1/2"0.5"6"4"3/8"ANSI B212.152Spiral00000000000
    1/2"0.5"13 1/2"12"3/8"ANSI B212.152Spiral000000000000
    1/2"0.5"18"16"3/8"ANSI B212.152Spiral000000000000
    9/16"0.5625"6"4"3/8"ANSI B212.152Spiral00000000000
    9/16"0.5625"13 1/2"12"3/8"ANSI B212.152Spiral000000000000
    5/8"0.625"6"4"3/8"ANSI B212.152Spiral000000000000
    5/8"0.625"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    5/8"0.625"18"16"3/8"ANSI B212.152Spiral000000000000
    11/16"0.6875"6"4"1/2"ANSI B212.152Spiral000000000000
    11/16"0.6875"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    3/4"0.75"6"4"3/8"ANSI B212.152Spiral000000000000
    3/4"0.75"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    3/4"0.75"18"16"1/2"ANSI B212.152Spiral000000000000
    7/8"0.875"6"4"1/2"ANSI B212.152Spiral000000000000
    7/8"0.875"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    7/8"0.875"18"16"1/2"ANSI B212.152Spiral000000000000
    1"1"6"4"1/2"ANSI B212.152Spiral000000000000
    1"1"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    1"1"18"16"1/2"ANSI B212.152Spiral000000000000
    1 1/8"1.125"6"4"1/2"ANSI B212.152Spiral000000000000
    1 1/8"1.125"13 1/2"12"1/2"ANSI B212.152Spiral000000000000
    1 1/8"1.125"18"16"1/2"ANSI B212.152Spiral000000000000
    1 1/4"1.25"6"4"1/2"ANSI B212.152Spiral000000000000
    1 3/8"1.375"6"4"1/2"ANSI B212.152Spiral000000000000
    1 1/2"1.5"6"4"1/2"ANSI B212.152Spiral000000000000
     

    Drill Bit Sets for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    Hex Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Drill Bit Sets for Masonry and Concrete, Hex Shank for Hammer and Rotary Drilling.
    The hex shape is less likely to slip in the chuck than a round shank. Use simultaneous rotary and hammering action to drill faster and penetrate material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    Standard Point—The most common point type handles most jobs. However, for more aggressive cutting that generates a lot of heat, consider a multipoint or serrated bit.
    No. of
    Pieces
    Drill Bit Sizes Included
    Drill Bit
    Point Type
    Specs. Met
    No. of
    Flutes
    Container
    Type
    Each
    Uncoated Carbide-Tipped Steel
    61/2", 1/4", 1/8", 3/16", 3/8", 5/16"StandardANSI B212.152Plastic Pouch0000000000000
     
    back to top