Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
 |  Hex |  Tamper-Resistant Hex |  Phillips |  Slotted |  Torx |
 Square |  Drilled Spanner |  Pozidriv® |  Tamper-Resistant Torx |
| No. of Pieces | Components Included | Bits Included | Adapters Included | Each | |
1/4" Hex Shank Size—Steel | |||||
|---|---|---|---|---|---|
| 100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | 000000 | 000000 |
1/4" Hex Shank Size for Power Tools—Steel | |||||
| 50 | 50 Bits | Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. | __ | 000000 | 000000 |
Adjustable-Length Screwdriver Sets
Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it to change the tip. Sets include a handle and multiple reversible shafts. The handle has a contoured ultra grip that provides comfort and the best possible grip for achieving maximum torque.
Additional reversible shafts are sold separately.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Components Included | Sizes Included  | Overall Lg. | Material | Handle Material | Container Type | Each | |
| 15 | 14 Reversible Shafts 1 Screwdriver Handle | Phillips: No. 1, No. 2 Slotted: 9/64", 3/16", 7/32", 17/64" Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 | 6 1/4"-9 1/4" | Chrome-Plated Steel | Plastic | Canvas Pouch | 000000 | 0000000 |
| Drive Size | Overall Lg. | Each | |
Phillips and Slotted | |||
|---|---|---|---|
| 1/4" × No. 2 | 6" | 0000000 | 000000 |
| 1/8" × No. 0 | 6" | 0000000 | 00000 |
| 5/32" × No. 1 | 6" | 0000000 | 00000 |
Hex | |||
| 1/8" × 9/64" | 6" | 0000000 | 00000 |
| 2 mm × 2.5 mm | 6" | 0000000 | 00000 |
| 3 mm × 4 mm | 6" | 0000000 | 00000 |
| 3/32" × 7/64" | 6" | 0000000 | 00000 |
| 5 mm × 6 mm | 6" | 0000000 | 00000 |
| 5/32" × 3/16" | 6" | 0000000 | 00000 |
Tamper-Resistant Torx | |||
| T10 × T15 | 6" | 0000000 | 00000 |
| T20 × T25 | 6" | 0000000 | 00000 |
| T30 × T40 | 6" | 0000000 | 00000 |
| T6 × T8 | 6" | 0000000 | 00000 |
| T7 × T9 | 6" | 0000000 | 00000 |
Square | |||
| No. 1 × No. 2 | 6" | 0000000 | 00000 |
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 0000000 |
Static-Control Precise-Control Screwdriver Sets
The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
| Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms-cm. | Each | |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 0000000 |
Screw-Holding Torque-Control Wing-Handle Keys
A retaining ring on the tip grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | Overall Wd. | Screw-Holding Mechanism | Material | Finish | Handle Material | Each | |
Torx | |||||||||
| T6 | 2 3/4" | 1 7/16" | 3/32" | Retaining Ring | Steel | Black Oxide | Plastic | 0000000 | 00000 |
Screw-Holding Torque-Control Wing-Handle Key Sets
These assorted keys have a retaining ring on the tip that grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Screw-Holding Mechanism | Material | Finish | Handle Material | Container Type | Each | |
| 7 | T6 Torx T-Handle Key (2 3/4" O'all Lg.) T7 Torx T-Handle Key (2 3/4" O'all Lg.) T8 Torx T-Handle Key (3" O'all Lg.) T9 Torx T-Handle Key (3" O'all Lg.) T10 Torx T-Handle Key (3" O'all Lg.) T15 Torx T-Handle Key (3 1/8" O'all Lg.) T20 Torx T-Handle Key (3 1/8" O'all Lg.) | Retaining Ring | Steel | Black Oxide | Plastic | Metal Stand | 0000000 | 000000 |
Torque-Control Wing-Handle Keys
Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | Overall Wd. | Material | Finish | Handle Material | Each | |
Torx | ||||||||
| T6 | 2 3/4" | 1 7/16" | 3/32" | Steel | Black Oxide | Plastic | 0000000 | 00000 |
Torque-Control Wing-Handle Key Sets
The assorted keys in these sets have a small T-handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
Torx | |||||||
|---|---|---|---|---|---|---|---|
| 7 | T6 Torx T-Handle Key (2 3/4" O'all Lg.) T7 Torx T-Handle Key (2 3/4" O'all Lg.) T8 Torx T-Handle Key (2 15/16" O'all Lg.) T9 Torx T-Handle Key (2 15/16" O'all Lg.) T10 Torx T-Handle Key (2 15/16" O'all Lg.) T15 Torx T-Handle Key (3 1/8" O'all Lg.) T20 Torx T-Handle Key (3 1/8" O'all Lg.) | Steel | Black Oxide | Plastic | Metal Stand | 0000000 | 000000 |