Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

A handle on the side of the carriage locks the carriage in place.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

These carriages and guide rails are steel.

A black chrome plating diffuses light, preventing reflecting light from causing equipment to malfunction.

These carriages and guide rails are steel.

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

To prevent drawers from slamming shut and support them even if they’re tall and full of heavy equipment, these steel slides have soft-closing bumpers and mount to the top and bottom of drawers.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.

With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

The choice for low-friction motion in high-temperature environments.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

The choice for low-friction motion in high-temperature environments.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

Despite their size, these rollers handle high radial load capacities without sacrificing speed.

The outer ring is built to handle higher speeds than standard shaft-mount track rollers.

These dollies are designed to make turning easy.

Maneuver machines and heavy loads into confined spaces. These dollies have rollers that swivel independently, allowing movement in any direction.

Large diameter rollers are axle mounted and roll like wheels.

These sets have all of the pieces you need to move heavy equipment. Their small-diameter rollers rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

The platforms on these dollies are oversized to handle pallets, machinery, large containers, and other heavy equipment.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

With 2" of each end softened, it's easier to machine a custom end for mounting. The rest of the shaft is case-hardened, which increases hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads.

Replace worn shafts in two-piece support-rail shaft systems, or mate with a support rail to create your own. The tapped mounting holes match those on our Support Rails.