Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.

These hinges are made of metal.

These hinges are made of metal.

These hinges are made of metal.

In addition to rotating 360°, these hinges tilt up and down.

Springs in these hinges without holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Remove the ring to pull out the pin.

These hinges with holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.

The mounting holes on these hinges form an industry-standard half-moon shape.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Bearings allow these hinges to open and close doors smoothly.

A snap-on cover protects these hinges from tampering and creates a finished appearance.

Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

These hinges are made of metal.

A spring in these hinges automatically swings doors and gates closed behind you.

These hinges have wide hinge leaves that provide a large mounting surface to keep freezer and refrigerator doors from sagging.

These hinges are made of metal.

Made of carbon fiber, these hinges are as strong as aluminum yet lighter in weight. All have leaves that are connected by a strip of flexible Kevlar instead of a pin.

Mounting slots allow door alignment adjustments during and after hinge installation.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

These hinges have a standard range of motion of 100° to 120°.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges.

Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

Add legs to these brackets and mount to a tabletop to create a folding table.