Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.

These hinges are made of metal.

These hinges are made of metal.

A grease fitting makes these hinges easy to lubricate.

Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

Tighten or loosen an adjustment screw to change the hinge resistance.

In addition to rotating 360°, these hinges tilt up and down.

Remove the ring to pull out the pin.

Squeeze the hinge handles together to retract the pin and disconnect a door; release the handles and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

Springs in these hinges without holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

The mounting holes on these hinges form an industry-standard half-moon shape.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Bearings allow these hinges to open and close doors smoothly.

A snap-on cover protects these hinges from tampering and creates a finished appearance.

Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

The hinge pin attaches to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Bearings allow these hinges to open and close doors smoothly.

With large pin diameters for added strength, these hinges can hold heavier doors and gates than other strap hinges.

When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim.

Choose these hinges for their adherence to strict military standards for material and construction.

These hinges are made of metal.

Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

Eliminate slamming doors—push the door and these hinges slowly pull it closed.

With a 170° range of motion, these hinges are for doors that need to open wide.

To ensure a good fit, these hinges have screws for horizontal, vertical, and depth adjustments after installation.

Surface-mount these hinges to the side of a cabinet.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Add a secondary panel that swings to mount more components in your enclosure.