Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.

Wrap the flexible heating element around small-diameter pipes and tubes or pack it into tight spaces.

Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.

Also known as self-regulating heat cable, these heaters automatically adjust heat output at different points along their length to account for differences in environmental temperature.

Keep liquid in your pipes from freezing, maintain a specific viscosity, and prevent condensation in cold areas.

Often used with extrusion, injection, and blow-molding machinery, these heaters clamp around nozzles to keep material warm for consistent discharge.

Heat water through direct contact in sanitary areas such as food, cosmetic, and pharmaceutical plants.

Use these heaters to efficiently heat chemicals in small containers—they’re sized to fit in compact openings that are 1 NPT or smaller.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

Bolt the flange to a matching flange welded on a container wall.

Often used for freeze protection in outdoor containers, these heaters float on the water’s surface and automatically keep the temperature between 45° and 65° F.

These heaters install through threaded container openings or pipe couplings.

Use the attached bracket to hook these heaters on the side of drums and in bung openings.

A bonded-graphite coating acts as a dry lubricant to ease insertion and removal for cleaning.

Heat resins, raw materials, and food with these heaters that fit around extrusion and injection-molding barrels.

For more durability than other adhesive-mount heaters, a thick layer of fiberglass-reinforced silicone rubber encases the heating element.

FM approved, these heat sheets are safe for use in areas with infrequent exposure, such as from a spill or a ventilation system failure, to flammable gases, liquids, and dust.

An adjustable thermostat senses the container’s surface temperature to automatically control heat output.

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters.

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them.

Strap these heaters around cylinders to keep gas flowing when the temperature drops. Also known as heat blankets, they heat cylinders from the outside, safely warming liquefied gas enough so that it can vaporize.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Also known as circulation heaters, these install directly into pipelines.

Also known as circulation heaters, these install directly into pipelines.

Keep your battery running at full power even when the temperature drops—these heaters warm batteries quickly without overheating them.

With more than three times the pressure rating of standard heat exchangers, these are often used for high-pressure condensing, evaporating, heating, and cooling. They are also known as shell and tube heat exchangers.

Use this general purpose tubing to insulate and protect wire and cable.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.

Identify ground wire with this green-and-yellow striped tubing.

This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. It withstands up to 500° F.

Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.

Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.

Resistant to diesel fuel, gasoline, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

Insulate and protect high-voltage devices. This tubing withstands higher voltages than standard heat-shrink tubing because it’s made of a flame-retardant material with excellent electrical insulation properties.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this tubing has an adhesive lining that melts when heated to bond it to the underlying surface.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.

Replace parts such as pumps, hose, and fusible links on your parts washer.

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.