About Heat-Shrink Tubing
More
Heat-Shrink Tubing
Use this general purpose polyolefin tubing to create a tight, custom-fit insulation to protect wire and cable.
SAE tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
- Material: Polyolefin Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: See Table
- Temperature Range: See Table
ID | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength, V/mil | Shrink Temp., °F | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
1 ft. Lg. | |||||||||
| 0.06" | 0.03" | 0.02" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.09" | 0.05" | 0.02" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 0000 |
| 0.13" | 0.06" | 0.02" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.19" | 0.09" | 0.02" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.25" | 0.13" | 0.03" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.38" | 0.19" | 0.03" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.5" | 0.25" | 0.03" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.03" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 1" | 0.5" | 0.04" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 1.5" | 0.75" | 0.04" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
| 2" | 1" | 0.05" | 500 | 250° | -65° to 275° F | Green | 10 | 0000000 | 00000 |
4 ft. Lg. | |||||||||
| 0.06" | 0.03" | 0.02" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 0.09" | 0.05" | 0.02" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 0.13" | 0.06" | 0.02" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 0.19" | 0.09" | 0.02" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 0.25" | 0.13" | 0.03" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 0.75" | 0.38" | 0.03" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 1" | 0.5" | 0.04" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 0000 |
| 1.5" | 0.75" | 0.04" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 00000 |
| 2" | 1" | 0.05" | 500 | 250° | -65° to 275° F | Green | 1 | 00000000 | 00000 |
- Material: Polyolefin Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 500 V/mil
- Shrink Temperature: 250° F
- Temperature Range: -65° to 275° F
ID | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 200 ft. Lg. | 250 ft. Lg. | 500 ft. Lg. | 1,000 ft. Lg. | |
| 0.06" | 0.03" | 0.02" | Green | 0000000 | |||||||
| 0.09" | 0.05" | 0.02" | Green | 0000000 | |||||||
| 0.13" | 0.06" | 0.02" | Green | 0000000 | |||||||
| 0.19" | 0.09" | 0.02" | Green | 0000000 | |||||||
| 0.25" | 0.13" | 0.03" | Green | 0000000 | |||||||
| 0.38" | 0.19" | 0.03" | Green | 0000000 | |||||||
| 0.5" | 0.25" | 0.03" | Green | 0000000 | |||||||
| 0.75" | 0.38" | 0.03" | Green | 0000000 | |||||||
| 1" | 0.5" | 0.04" | Green | 0000000 | |||||||
| 1.5" | 0.75" | 0.04" | Green | 0000000 | |||||||
| 2" | 1" | 0.05" | Green | 0000000 | |||||||
Heat-Shrink Tubing for Ground Wire
- Material: Polyolefin Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: Not Rated
- Shrink Temperature: 250° F
- Temperature Range: -65° to 275° F
- Specifications Met: UL Recognized Component, CSA Certified
Identify ground wire with this green-and-yellow striped tubing. It’s made of general purpose polyolefin.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 2ft. Lg. | 4ft. Lg. | 25ft. Lg. | 50ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Each | Each | Each | Each | ||||
| 0.12" | 0.06" | 0.02" | 000000 | 00 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.24" | 0.12" | 0.02" | 000000 | 00 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.32" | 0.16" | 0.03" | 000000 | 00 | 000000 | 00 | 0000000 | 00000 | 000000 | 00 |
| 0.39" | 0.2" | 0.03" | 000000 | 00 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 0.47" | 0.24" | 0.03" | 000000 | 00 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.75" | 0.35" | 0.03" | 000000 | 00 | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
| 1.02" | 0.51" | 0.04" | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 1.5" | 0.75" | 0.04" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
Chemical-Resistant Heat-Shrink Tubing
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
SAE AMS-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | 1/2 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Color | Pkg. Qty. | Pkg. | |
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | Green | 5 | 00000000 | 00000 |
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 1" | 0.5" | 0.04" | 1,000 V/mil | Green | 5 | 00000000 | 0000 |
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | Green | 5 | 00000000 | 00000 |
| 2" | 1" | 0.05" | 1,000 V/mil | Green | 5 | 00000000 | 00000 |
| 3" | 1.5" | 0.07" | 1,000 V/mil | Green | 5 | 00000000 | 00000 |
| 4" | 2" | 0.07" | 1,000 V/mil | Green | 3 | 00000000 | 00000 |
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Color | 5 ft. Lg. | 10 ft. Lg. | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 125 ft. Lg. | 250 ft. Lg. | |
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | Green | 00000000 | |||||||
| 1" | 0.5" | 0.04" | 1,000 V/mil | Green | 00000000 | |||||||
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | Green | 00000000 | |||||||
| 2" | 1" | 0.05" | 1,000 V/mil | Green | 00000000 | |||||||
| 3" | 1.5" | 0.07" | 1,000 V/mil | Green | 00000000 | |||||||
| 4" | 2" | 0.07" | 1,000 V/mil | Green | 00000000 | |||||||
Heat-Shrink Tubing Assortments
- Material: Polyolefin Plastic
Keep a variety of sizes of general purpose polyolefin tubing on hand.
| Number of Pieces | Includes | Shrink Ratio | Shrink Temp., °F | Colors Included | Lg. | Each | |
Plastic Bag | |||||||
|---|---|---|---|---|---|---|---|
| 14 | 0.38" ID Before Shrinking (2 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 000000 |
| 14 | 0.5" ID Before Shrinking (2 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 00000 |
| 21 | 0.19" ID Before Shrinking (3 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 00000 |
| 21 | 0.25" ID Before Shrinking (3 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 00000 |
| 28 | 0.13" ID Before Shrinking (4 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 00000 |
| 35 | 0.09" ID Before Shrinking (5 of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 00000000 | 00000 |
Plastic Box | |||||||
| 30 | 0.05"-0.19" ID Before Shrinking (6 of each color) | 2:1 | 250° | Black, Blue, Green, Red, Yellow | 1/2ft. | 0000000 | 00000 |
Compartmented Plastic Box | |||||||
| 133 | 0.09"-0.5" ID Before Shrinking (6 sizes of each color) | 2:1 | 250° | Black, Blue, Clear, Green, Red, White, Yellow | 1/2ft. | 0000000 | 000000 |
| 177 | 0.12"-0.71" ID Before Shrinking (5 Sizes) | 3:1 | 190° | Black, Blue, Green with Yellow Stripe, Red, White | 1 3/8", 3 1/8", 1/2ft. | 00000000 | 00000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |