For protection from arc flash hazards, these kits include several of the safety items you may need. All items meet NFPA 70E for protection against flames and electrical arc flashes.

Choose clothing that meets the arc rated personal protective equipment (PPE) category required by your workplace. PPE Category 2 kits have the most common arc-flash-protection rating for industrial applications. PPE Category 4 kits provide the highest level of protection from arc flashes.

Style A kits come with a hard hat, face shield, hood, and storage bag.

Style B kits come with a hard hat, face shield, hood, coveralls, and two storage bags.

Style C kits come with a hood, jacket, bib overalls, and two storage bags. The jacket and bib overalls are made of Gore-Tex Pyrad, which is lighter in weight than most Category 4 fabrics, but just as protective.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any garments you expect to wear under the protective clothing.

Clothing kits that cannot be sold to the listed areas are restricted due to chemical regulations.

Shield your face and neck from flame and electrical hazards while working in the cold. These gaiters meet NFPA 70E and 2112 standards for protection from arc flash and flash fire. They’re rated PPE category 2, which is the most common arc flash standard for industrial applications. Made from a modacrylic fabric, these gaiters are lightweight and flexible. They trap heat but allow moisture to escape, so you stay warm and dry. They have four-way stretch for a customizable fit—fold them in half for a double layer of protection and warmth.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in.

Measure around the fullest part of your chest to determine your size. Take all measurements over any clothing you expect to wear under the coveralls.

Clothing kits cannot be sold to the listed areas due to product regulations.

Keep cool while staying shielded from flame and electrical hazards. These gaiters meet NFPA 70E standards for protection against flames and arc flashes. Made from flame-resistant fabric, these gaiters defend against radiant heat and sparks while remaining soft and comfortable. They wick moisture from your head and neck to keep you cool and are easy to breath through when worn as a face covering. With UPF 50 sun protection, they block 98% of UV rays from reaching your skin. An odor-resistant treatment prevents bacteria growth, eliminating odors caused by sweat.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating. These gaiters meet Category 1, the lowest level of arc-rated PPE.

Often used in utility work, metalworking, and welding, these hard-hat liners meet NFPA 70E to protect from flames and electrical arc flashes. They also shield your head and nape from the wind and cold. Secure the liner to your hard hat with the attached hook and loop tabs on each side. Choose a hard-hat liner that meets the arc rated personal protective equipment (PPE) category required by your workplace.

Liners with head, nape, and neck coverage have two layers of insulation inside the flame-resistant shell to protect against the cold: a mid-layer of aramid/modacrylic fabric and an inner layer of cotton/modacrylic fleece.

Liners with a removable nape cover allow you to cool off your nape by zipping off the back. With the nape cover removed, the liner protects the head like a cap.

Use liners with warming pad slots for extra warmth around the ears—slip hand warmer pads (sold separately) into the slots on each side.

These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a modacrylic/aramid blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.

When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

Nomex aramid is heavier than PBI, yet breathable and moisture wicking. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. This is the most common PPE category for standard industrial applications.

PBI is lightweight and provides better wear- and heat-resistance than Nomex.

Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.

Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.

Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.

Kevlar aramid/Melamine blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.

Providing greater safety while welding than face shields, these helmets have an outer filter lens cover for protection from scratches and weld spatter. All helmets have a ratchet adjustment with an easy-turn knob.

Helmets with a flip-up lens let you expose a viewing lens.

Nylon helmets are lighter weight than fiberglass helmets.

Fiberglass helmets provide superior heat resistance.

Leather helmets are flexible, so they’re easy to maneuver in tight spots.

Style B and D helmets have an extended forehead that offers more overhead protection.

Also known as pancake welding helmets, these helmets have a flat face so you can get close to your welds. They’re often used when welding pipes, but are also useful where a standard welding helmet would be too bulky. These helmets extend further on one side than a standard welding helmet does for increased face protection from UV light, sparks, and spatter. A balsa wood box mounted inside the helmet fits around your face and eyes to block all light, even when working outdoors. Sand the box for a customizable fit. Designed for all-day comfort, they’re made of lightweight carbon fiber and have an open back for plenty of airflow.

These helmets have a large viewing area for a clear view of your workspace. The instant you start to weld, the lens darkens. Solar cells recharge the helmet’s battery while you work.

Choose a helmet based on which hand you use to hold your torch—they’re designed to protect the side opposite your welding hand, where sparks are most likely to fly. This means that left-hand helmets extend further on the right while right-hand helmets extend further on the left.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Warning: These helmets are made of carbon fiber, a conductive material. Never let them touch the welding rod holder and the material your ground cable is on at the same time. This could result in electrical shocks, burns, or eye injuries.

Protect your eyes the moment you start welding—four sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain. To customize the helmet’s fit so you can focus on welding, these helmets have a ratchet adjustment with an easy-turn knob. Solar cells recharge the helmet’s battery while you work.

Nylon plastic helmets offer a wider range of shade numbers and better optical clarity than polycarbonate helmets. They use digital controls to adjust settings such as shade number, light sensitivity, and mode selection.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Protect your eyes the moment you start welding with a helmet that senses light and automatically darkens. You can change the shade of the lens without removing these helmets by using a Bluetooth-connected app. The app also monitors battery life and tracks the time spent cutting. Save up to 10 setting combinations to switch tasks quickly. Along with the app, these helmets use a tap function to switch between welding and grinding modes. To change modes, tap the side of the helmet twice.

To improve your weld quality and decrease eye strain, you can switch between cool, neutral, and warm tones. The true color lens enhances clarity and color accuracy to reduce the color distortion of your view.

Every inch of these helmets is designed to improve your welding experience. A rounded, slim design helps you fit in tight spaces. Levers adjust the helmet’s tilt and position on your head. The head suspension sits comfortably on the back of the head and balances the helmet’s weight for a barely-there feel. Side windows increase peripheral vision for high-quality welds.

Use side window covers when you need to block peripheral light.

Weld with the same quality as you would in bright conditions. These helmets have a built-in LED light that brightens your workspace, so you can see your weld and maintain precision even in dark areas. Turn the LED light on with the press of a button, and when it detects an arc or intense light, the light automatically turns off.

As you begin to weld, four arc sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. To switch to grind mode without removing your helmet, use the button above the lens.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach magnifying lenses to see details better.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Take full control of your shade level with these helmets—you can set the lens to adjust in half-shade increments. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. Save up to nine settings to quickly switch between tasks. To switch to grind mode without removing your helmet, press the button above the lens.

As you weld, four sensors detect the light and automatically darken the lens. To improve weld quality and reduce eye strain, these helmets have a wide panoramic view and a true color lens. The lens enhances clarity and color accuracy to reduce the color distortion of your view.

Solar cells recharge the helmet’s battery while you work.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach a magnifying lens to enhance details.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.

Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).