Heat Exchangers For Motor Oil

Filter by

For Use With

System of Measurement

Pipe Size

Shell Material

Tube-Side Pipe Size

Flow Capacity

Overall Length

Heating/Cooling Capacity

Tube Material

Heat Exchanger Type

Surface Area

Shell-Side Pipe Size

Number of Plates

Maximum Temperature

Maximum Pressure

Overall Width

Number of Passes

Tube-Side Flow Capacity

Overall Height

Shell-Side Flow Capacity

Plate Finish

Minimum Temperature

Plate Material

Forward

How can we improve?

55 Products

Heat Exchangers

With Threaded Shell-Side Connection

With Flanged Shell-Side Inlet Connection

Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. They’re commonly used in refrigeration and engine cooling systems. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.

Heat exchangers with a 316 stainless steel shell and tubes are the most corrosion resistant.

Heat exchangers with baffled tubes direct liquid to make four passes through the tubes for more efficient heat transfer than other heat exchangers.

ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.

For technical drawings and 3-D models, click on a part number.

NPT Female Threaded Shell-Side and Tube-Side Connections

					Shell-Side			Tube-Side			Overall
Heating/Cooling Cap., Btu/hr.	Surface Area, sq. ft.	No. of Passes	Min. Temp., °F	Max. Temp., °F	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
Brass Shell and Baffled Copper Tube
130,000	2.4	4	-20°	300°	1	24	300	3/4	12	150	10 7/8"	4 3/16"	00000000	0000000
195,000	4.3	4	-20°	300°	1	24	300	3/4	12	150	16 7/8"	4 3/16"	00000000	00000000
280,000	7.4	4	-20°	300°	1	24	300	3/4	12	150	26 7/8"	4 3/16"	00000000	00000000
350,000	9.1	4	-20°	300°	1 1/2	60	300	1	30	150	18 1/8"	6 1/2"	00000000	00000000
560,000	15.7	4	-20°	300°	1 1/2	60	300	1	30	150	28 1/8"	6 1/2"	00000000	00000000
890,000	23	4	-20°	300°	2	73	300	1 1/2	57	150	29"	7 1/2"	00000000	00000000
1,115,000	34	4	-20°	300°	2	73	300	1 1/2	57	150	41"	7 1/2"	00000000	00000000
1,585,000	41	4	-20°	300°	3	140	300	2	104	150	30 3/8"	9 3/4"	00000000	00000000
2,000,000	62	4	-20°	300°	3	140	300	2	105	150	42 3/8"	9 3/4"	00000000	00000000
Steel Shell and Baffled Copper Tube
195,000	4.3	4	-20°	300°	1	22	300	3/4	12	150	17"	4 1/2"	0000000	00000000
280,000	7.4	4	-20°	300°	1	30	300	3/4	12	150	27"	4 1/2"	0000000	00000000
350,000	9.1	4	-20°	300°	1 1/2	32	300	1	30	150	18 11/16"	6 3/4"	0000000	00000000
560,000	15.7	4	-20°	300°	1 1/2	43	300	1	30	150	28 11/16"	6 3/4"	0000000	00000000
890,000	23	4	-20°	300°	2	51	300	1 1/2	57	150	29"	7 3/4"	0000000	00000000
1,115,000	34	4	-20°	300°	2	103	300	1 1/2	57	150	41"	7 3/4"	0000000	00000000
1,585,000	41	4	-20°	300°	3	103	300	2	104	150	30 1/2"	10 1/2"	0000000	00000000
2,000,000	62	4	-20°	300°	3	103	300	2	105	150	42 1/2"	10 1/2"	0000000	00000000
Steel Shell and Copper Tube
Not Rated	15	2	Not Rated	400°	2 1/2 (Inlet); 1 1/4 (Outlet)	38	100	1 1/4	38	100	28 5/8"	6"	0000000	00000000
316 Stainless Steel Shell and Baffled 316 Stainless Steel Tube
130,000	2.4	4	-20°	450°	1	32	225	3/4	12	150	10 3/8"	4 3/16"	00000000	00000000
195,000	4.3	4	-20°	450°	1	32	225	3/4	12	150	16 3/8"	4 3/16"	00000000	00000000
280,000	7.4	4	-20°	450°	1	32	225	3/4	12	150	26 3/8"	4 3/16"	00000000	00000000
350,000	9.1	4	-20°	450°	1 1/2	76	225	1	30	150	17 13/16"	6 1/2"	00000000	00000000
560,000	15.7	4	-20°	450°	1 1/2	76	225	1	30	150	27 13/16"	6 1/2"	00000000	00000000
890,000	23	4	-20°	450°	2	126	225	1 1/2	57	150	28 1/8"	7 1/2"	00000000	00000000
1,115,000	34	4	-20°	450°	2	126	225	1 1/2	57	150	40 1/8"	7 1/2"	00000000	00000000
1,585,000	41	4	-20°	450°	3	220	225	2	104	150	28"	9 3/4"	00000000	00000000
2,000,000	62	4	-20°	450°	3	220	225	2	105	150	40"	9 3/4"	00000000	00000000

NPT Female Threaded Shell-Side and Tube-Side Connections—ASME Code

					Shell-Side			Tube-Side			Overall
Heating/Cooling Cap., Btu/hr.	Surface Area, sq. ft.	No. of Passes	Min. Temp., °F	Max. Temp., °F	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
150,000	4.5	2	-20°	375°	2 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	28 1/2"	7 1/4"	0000000	000000000
420,000	6.8	2	-20°	375°	2 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	40 1/2"	7 1/4"	0000000	00000000
720,000	9.2	2	-20°	375°	3 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	52 1/2"	7 1/4"	0000000	00000000
1,350,000	17.4	2	-20°	375°	2 1/2 (Inlet); 1 (Outlet)	175	150	2	175	150	53 1/4"	10 1/2"	0000000	00000000

NPT Female Flanged Shell-Side Inlet Connections and Threaded Tube-Side Connections

				Shell-Side			Tube-Side			Overall
Heating/Cooling Cap.	Surface Area, sq. ft.	No. of Passes	Max. Temp., °F	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
Not Rated	30.2	2	400°	4 (Inlet); 1 1/2 (Outlet)	100	100	2	100	100	39 3/4"	8 1/8"	0000000	000000000
Not Rated	38.8	2	400°	4 (Inlet); 1 1/2 (Outlet)	100	100	2	100	100	51 3/4"	8 1/8"	0000000	00000000
Not Rated	72.4	2	400°	6 (Inlet); 2 (Outlet)	180	100	2 1/2	180	100	53"	10 1/8"	0000000	00000000

High-Efficiency Heat Exchangers

With Two Mounting Studs

With Four Mounting Studs

With Two Mounting Holes

Stacked, corrugated plates maximize contact with liquid or steam flowing through these brazed plate heat exchangers for faster heat transfer than shell and tube heat exchangers. Plates are brazed in a vacuum furnace to ensure 100% sealed construction.

Copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling water from 120° to 100° F using 70° F water.

ASME BPVC VIII.1 copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling 100 SSU oil to 125° F using 85° F water.

Nickel-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling oil from 140° to 120° F using 70° F water.

ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.

For technical drawings and 3-D models, click on a part number.

								Overall			Mounting Hole		Mounting Stud
Heating/Cooling Cap., Btu/hr.	Surface Area, sq. ft.	Temp. Range, °F	Pipe Size	Thread Type	Gender	Flow Cap., gpm	Max. Pressure, psi	Ht.	Wd.	Dp.	No. of	Dia.	No. of	Thread Size	Lg.		Each
Heat Exchangers
Copper-Brazed 316 Stainless Steel Plate
69,000	2.2	-320° to 350°	3/4	NPT	Male	7	450	9 1/8"	3 1/2"	2 5/8"	__	__	2	M8	20mm	00000000	0000000
80,000	3	-320° to 350°	1	NPT	Male	8	450	13 3/16"	5"	1 1/4"	__	__	4	M10	20mm	00000000	000000
185,000	6.8	-320° to 350°	1	NPT	Male	19	450	13 3/16"	5"	2"	__	__	4	M8	20mm	00000000	000000
390,000	14.3	-320° to 350°	1	NPT	Male	40	450	13 3/16"	5"	4"	__	__	4	M10	20mm	00000000	000000
570,000	21.9	-320° to 350°	1 1/4	NPT	Male	58	450	13 3/16"	5"	5 3/4"	__	__	4	M8	20mm	00000000	00000000
998,000	36.8	-320° to 350°	2	NPT	Male	105	300	20 5/16"	9 13/16"	3.06"	__	__	4	1/2"-13	1 1/2"	00000000	00000000
1,710,000	63	-320° to 350°	2	NPT	Male	170	300	20 5/16"	9 13/16"	4.86"	__	__	4	1/2"-13	1 1/2"	00000000	00000000
Nickel-Brazed 316 Stainless Steel Plate
16,000	3.1	-320° to 390°	1	NPT	Male	4	360	13 3/16"	4 7/8"	2 3/16"	__	__	4	M10	13/16"	0000000	000000
37,000	6.8	-320° to 390°	1	NPT	Male	9	360	13 3/16"	4 7/8"	3 1/16"	__	__	4	M10	13/16"	0000000	00000000
56,000	10.6	-320° to 390°	1	NPT	Male	13	360	13 3/16"	4 7/8"	4"	__	__	4	M10	13/16"	0000000	00000000
74,000	14.3	-320° to 390°	1	NPT	Male	18	360	13 3/16"	4 7/8"	4 7/8"	__	__	4	M10	13/16"	0000000	00000000
120,000	40.7	-320° to 390°	2	NPT	Male	30	390	20 15/16"	10 11/16"	4 1/16"	__	__	4	M12	1 3/16"	0000000	00000000
ASME BPVC.VIII.1 Heat Exchangers
Copper-Brazed 316 Stainless Steel Plate
5,000	4.8	-310° to 450°	3/4	NPT	Male	27	435	8 7/16"	3 3/16"	4 7/16"	2	9/32"	__	__	__	0000000	000000
12,000	7.9	-310° to 450°	1	NPT	Male	29	435	12 3/16"	4 3/8"	4 1/4"	2	13/32"	__	__	__	0000000	000000
17,000	10.7	-310° to 450°	1	NPT	Male	37	435	12 3/16"	4 3/8"	5 1/4"	2	13/32"	__	__	__	0000000	000000
50,000	15.6	-310° to 450°	1	NPT	Male	22	435	20 11/16"	4 3/8"	4 1/4"	2	13/32"	__	__	__	0000000	000000
75,000	26.8	-310° to 450°	1	NPT	Male	34	435	20 11/16"	4 3/8"	6 3/16"	2	13/32"	__	__	__	0000000	00000000
125,000	29.7	-310° to 450°	2	NPT	Male	57	435	24 5/16"	7 1/2"	5 3/4"	2	1/2"	__	__	__	0000000	00000000
380,000	82.8	-310° to 450°	2	NPT	Male	141	435	24 5/16"	7 1/2"	11 1/2"	2	1/2"	__	__	__	0000000	00000000

Heat Exchangers for Sampling

1.3 sq. ft.
Surface
Area

3.8 sq. ft.
Surface
Area

Often used to monitor boiler water quality without shutting down the system, these heat exchangers cool hot liquid samples to safe temperatures for testing. Sample liquid flows through the tubes, and cold water from an external water supply flows around the tubes to cool the liquid in the tubes. Cooled sample water then flows out of the heat exchanger for analysis.

316 stainless steel tubes have the best corrosion resistance.

Heat exchangers with 1.3 or 1.64 sq. ft. surface area are often used for sampling liquid from a boiler. Heat exchangers with 3.8 sq. ft. surface area are good for sampling steam from a boiler or for continuously cooling sample water.

For technical drawings and 3-D models, click on a part number.

	Shell-Side						Tube-Side						Overall
Surface Area, sq. ft.	Pipe Size	Thread Type	Gender	Flow Cap., gpm	Max. Pressure, psi	Max. Temp., °F	Pipe Size	Thread Type	Gender	Flow Cap., gpm	Max. Pressure, psi	Max. Temp., °F	Lg.	Head Dia.		Each
Steel Shell and 316 Stainless Steel Tube
1.3	1/4	NPT	Female	2	150	450°	1/4	NPT	Female	4	1,200	750°	17 1/4"	3 1/2"	0000000	0000000
3.8	3/8	NPT	Female	2	150	450°	1/4	NPT	Female	4	4,900	750°	32 5/8"	__	0000000	00000000