Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

Style C have a gooseneck arm to direct light where you need it. This makes them a good fit for pockets and clipboards.

Style D have a magnetic back you can stick to metal surfaces, and their two-way clip fits over pockets, straps, and other surfaces. The head rotates 180° to aim light where you need it.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP54-rated flashlights are sealed against dust.

Light up your work from under your brim. These lights clip onto the rim of a cap or hard hat to keep your hands free from holding a flashlight. They have LED bulbs, which are brighter and less hot than incandescent and halogen bulbs. You can adjust how many lights you have on—one, three, or all five. Or you can set the lights to flash.

Wear a flashlight around your neck to keep your hands free. These lights are great when you need to wear a brimmed hat or other head gear that would interfere with a headlamp. Bend and angle the adjustable arms and they’ll stay in place. You can also wrap them around nearby objects and point them where you need light. They flood the area with a uniform beam, which is particularly good for up-close and inspection tasks.

Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot. Each headlamp also has a regular LED light to see in dim and dark areas. Both bulbs emit a focused, uniform light beam that works best for close-up inspections.

Headlamps with a motion sensor switch between brightnesses, beam patterns, and bulb types with a wave of your hand. They’re helpful when your gloves are oily or dirty. You can also press a button to switch between these modes. The additional bull’s eye beam pattern has a wide angle to illuminate at a distance.

Weld with the same quality as you would in bright conditions. These helmets have a built-in LED light that brightens your workspace, so you can see your weld and maintain precision even in dark areas. Turn the LED light on with the press of a button, and when it detects an arc or intense light, the light automatically turns off.

As you begin to weld, four arc sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. To switch to grind mode without removing your helmet, use the button above the lens.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach magnifying lenses to see details better.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Ditch the flashlight and bulky headlamp—these bump caps have LEDs under their brim to light your way. Often used in crawlspaces and in other tight spots, these bump caps have a rigid frame that protects your head from bumps and scrapes. To keep you comfortable, these caps have foam padding and cooling vents. Turn them on or off with the push of a button.

For replacement batteries, see CR2032 batteries.

Fluorescent yellow bump caps make you easy to spot in any lighting.

Light up your space when you’re working in cold conditions. These hats have built-in LEDs, so you don’t need to wear a headlamp or hold a flashlight. Made of stretchy fabric, they fit snugly on your head to trap heat. Press a button on the front of the hat to turn the lights on or off. You can also use the button to change the distance setting: the beam angles down for close-up tasks or illuminates up to 72 feet ahead. These hats come with four replaceable batteries that power the lights for up to 68 hours.

The sealed assembly withstands the rigors of outdoor use. In addition to using these bulbs in vehicles, they can be used for spot, flood, and emergency lighting. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

These bulbs are small, but very bright, so they're often used in flashlights and optical instruments such as projectors and microscopes. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

Often used as status indicators, in displays, or to check circuit function in prototyping and testing, these bulbs have wire terminals to directly install onto circuit boards. As LEDs, they last longer, are more efficient, and produce less heat than other types of bulbs. Vibration won’t cause these bulbs to malfunction. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. They require a resistor (sold separately) to limit current.

These bulbs are sized to fit tight spaces such as indicators and vehicle lights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

Krypton bulbs are known for generating a bright light, such as a flash in a camera. They last longer than incandescent bulbs.

Plastic-coated glass and plastic bulbs are more shatter-resistant than glass.

Pins on either side of the base lock these bulbs into sockets. These bulbs are sized to fit tight spaces such as indicators and vehicle lights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration.

Plastic-coated glass and plastic bulbs are more shatter-resistant than glass.

Bulbs for General Electric ET-16 sockets must match the ohms listed on the back of your socket.

For technical drawings and 3-D models, click on a part number.