Hard Hats
These Type I hard hats protect against blows from falling objects to the top of the head only.
Class E hard hats are proof-tested at 20,000 volts. Class C have not been tested for electrical protection.
Hard hats with a three-point chin strap stay securely on your head. They’re often worn at heights and in windy conditions, and during active movement such as climbing, working sideways, and working upside down. These hard hats have a foam shell that absorbs impact to reduce force on the neck and head.
Hard hats with ventilation holes have slots that increase air circulation to keep you cool.
Hard hats with reversible suspension can be worn backward without removing and reinstalling the suspension—just swing it to the opposite side.
Hard hats with a rain-trough brim have a rear gutter that channels water away from your neck.
Hard hats with a full brim have a wide front-to-back brim that provides added protection against sun, glare, splash, and rain.
Hard hats with mounting slots attach to face shields and earmuffs (not included).
Hard hats come with four-, six-, or eight-point suspensions—the more suspension points, the better the hard hat distributes the force of impact. Pinlock suspensions adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.
Hard Hats | Replacement Suspensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Suspension Points | Material | Hat Size | Includes | Mounting Slots | Specifications Met | Color | Each | Each | ||
Pinlock Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | __ | Yes | ANSI/ISEA Z89.1 | Red | 00000000 | 000000 | 000000000 | 000000 |
| 6 | Polyethylene Plastic | 6 1/2-8 | Sweatband | Yes | ANSI/ISEA Z89.1 | Red | 00000000 | 00000 | 00000000 | 00000 |
Ratchet Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | __ | Yes | ANSI/ISEA Z89.1 | Red | 00000000 | 00000 | 000000000 | 00000 |
| 6 | Polyethylene Plastic | 6 1/2-8 | __ | Yes | ANSI/ISEA Z89.1 | Red | 00000000 | 00000 | 00000000 | 00000 |
Hard Hats | Replacement Suspensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Suspension Points | Material | Hat Size | Includes | Mounting Slots | Specifications Met | Color | Each | Each | ||
Pinlock Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | Sweatband | Yes | ANSI/ISEA Z89.1 | Red | 000000 | 000000 | 0000000 | 00000 |
Ratchet Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | Sweatband | Yes | ANSI/ISEA Z89.1 | Red | 000000 | 00000 | 0000000 | 00000 |
Hard Hats | Replacement Suspensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Suspension Points | Material | Hat Size | Includes | Mounting Slots | Specifications Met | Color | Each | Each | ||
Pinlock Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | Sweatband | Yes | ANSI/ISEA Z89.1 | Red | 0000000 | 000000 | 0000000 | 00000 |
Ratchet Adjustment | ||||||||||
| 4 | Polyethylene Plastic | 6 1/2-8 | Sweatband | Yes | ANSI/ISEA Z89.1 | Red | 0000000 | 00000 | 0000000 | 00000 |
Hard Hats | Replacement Suspensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Suspension Points | Material | Hat Size | Includes | Mounting Slots | Specifications Met | Color | Each | Each | ||
Pinlock Adjustment | ||||||||||
| 6 | Polyethylene Plastic | 6 1/2-8 | Sweatband | No | ANSI/ISEA Z89.1 | Red | 000000 | 000000 | 0000000 | 000000 |
Ratchet Adjustment | ||||||||||
| 6 | Polyethylene Plastic | 6 1/2-8 | Sweatband | No | ANSI/ISEA Z89.1 | Red | 0000000 | 00000 | 0000000 | 00000 |
| Material | Each | |
| Nylon Fabric | 0000000 | 000000 |
| Material | Each | |
| Polyester Mesh/Foam | 0000000 | 000000 |
| Material | Each | |
| Polyester Mesh/Foam | 0000000 | 00000 |
| Material | Each | |
| Polyester Mesh | 0000000 | 000000 |
Hard Hats for Top and Side Impacts
Protect your head from more than just falling objects—these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head. A foam shell helps absorb impact to reduce force on the head and neck. Tighten a knob on the back of these hard hats for a snug and comfortable fit. To prevent perspiration from getting into your eyes, all have a sweatband. Use the mounting slots to attach accessories such as earmuffs (not included).
Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts AC.
Heat-Resistant Hard Hats
Made from a material similar to that used in firefighters' helmets.
Hard hats are Type I, Class E, meaning they protect against blows to the top of the head only and are proof-tested at 20,000 volts.
Pinlock suspensions adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.
Hard Hats | Replacement Suspensions | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of Suspension Points | Material | Hat Size | Includes | Specifications Met | Color | Each | Each | ||
Pinlock Adjustment | |||||||||
| 6 | Polycarbonate Plastic | 6 1/2-8 | Sweatband | ANSI/ISEA Z89.1 | Red | 0000000 | 000000 | 0000000 | 000000 |
Ratchet Adjustment | |||||||||
| 6 | Polycarbonate Plastic | 6 1/2-8 | Sweatband | ANSI/ISEA Z89.1 | Red | 0000000 | 00000 | 0000000 | 00000 |
Hard Hats with Face Shield and Earmuffs
These hard hats give all-in-one head, face, and ear protection. You can lift the face shield and earmuffs when not in use. Turn the ratchet in the back to adjust for a secure fit.
Type I, Class E hard hats protect against blows to the top of the head only and are proof-tested at 20,000 volts.
Lens | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Color | Number of Suspension Points | Material | Hat Size | Chin Strap | Noise Reduction Rating, dBA | Ht. | Wd. | Thick. | Construction | Material | Color | Each | |
Type I, Class E—Cap Brim | |||||||||||||
Ratchet Adjustment | |||||||||||||
| Red | 6 | Polyethylene Plastic | 6-8 5/8 | No | 24 | 8" | 15 1/2" | 0.040" | Solid | Polycarbonate Plastic | Clear | 00000000 | 000000 |
Bump Caps
Protect your head from minor bumps and scrapes. All have a pinlock suspension that adjusts with interlocking straps.
Cold-Protection Hard-Hat Wind Guards
Stretch these form-fitting guards over hard hats to provide warmth and protection from the wind. They are made of moisture-wicking polyester to prevent moisture buildup.
Hard-Hat Labels
Attach these labels to hard hats to provide safety reminders or to identify first-aid personnel.
Pkg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Mount Type | Material | Pkg. Qty. | 1-9 | 10-Up | |
| 2" | Adhesive Back | Vinyl Plastic | 4 | 000000000 | 00000 | 00000 |
Pkg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Mount Type | Material | Pkg. Qty. | 1-9 | 10-Up | |
| 2" | Adhesive Back | Vinyl Plastic | 4 | 000000000 | 00000 | 00000 |
Pkg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Mount Type | Material | Pkg. Qty. | 1-9 | 10-Up | |
| 2" | Adhesive Back | Vinyl Plastic | 4 | 000000000 | 00000 | 00000 |