Protect your head from more than just falling objects—these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head. A foam shell helps absorb impact to reduce force on the head and neck. Tighten a knob on the back of these hard hats for a snug and comfortable fit. To prevent perspiration from getting into your eyes, all have a sweatband. Use the mounting slots to attach accessories such as earmuffs (not included).

Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts AC.

Hard hats with a Koroyd Helmet Safety System have a layer of small tubes that crumple upon impact to lessen blunt force to your head. Koroyd weighs less than comparable helmet safety systems because it is 95% air. Built-in padding with high-purity silver eliminates odor and bacteria, while a comfort liner helps for all-day wear. For frequent headlamp users, these hard hats have built-in strap clips that keep your lamp securely in place. An integrated TwICEme chip with near-field communication (NFC) technology helps to save lives in an accident. The chip stores emergency contacts and health information and sends your precise location to help first responders. A low profile gives these hard hats a sleek look.

Hard hats with a chin strap stay securely on your head. They’re useful for windy conditions and working at heights. They’re also good for active movement such as climbing, working sideways, and working upside down. All chin straps have a magnetic lock, so they’re easy to connect and release with one hand.

Add a face shield (sold separately) that slides down over the full hat brim to guard your face. The toric shape of the shield closely follows the shape of your face to protect your chin and provide a wide peripheral field of vision. These shields meet ANSI Z87.1+ standards. Quickly replace the shield with the streamlined attachment system. Press-to-release slotted adapters make it easy to remove the brackets from the hard hat. Use a shade 5 welding face shield for optimal visibility and protection from harmful light and radiation.

Protect your head without sacrificing style. A wide brim wraps all the way around these hard hats to keep sun and rain off your face and neck. Rated Type I and Class E, they protect the top of the head from falling objects and are tested at 20,000 volts for electrical insulation. Turn a knob on the back of the hat to tighten it for a snug fit. A built-in sweatband helps keep perspiration out of your eyes.

Stay cool and protect your head—a reflective barrier in these hard hats lowers the temperature by 20 degrees. A full brim runs around the hat to shield your head and neck from sun, rain, and glare. It offers 12% more coverage than the brim on a standard full brim hat, providing additional protection from the elements. A built-in sweatband keeps perspiration out of your eyes, even if you sweat.

Type I hard hats protect against blows to the top of the head only. A foam shell absorbs impact, reducing force on the neck and head. To fit the hard hat snugly to your head, turn a knob on the back that tightens the suspension. The reversible suspension lets you turn the hat around without taking it off. For example, spin the hat to move a face shield out of the way or turn the hat to fit in a tight space. You can also add attachments such as face shields or earmuffs to the mounting slots on the hat.

Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts.

With a low profile, these hard hats give close-fitting protection to your head in confined spaces. They don’t have a brim, so you can see what’s above you and avoid snagging on climbing gear. Chin straps hold these hard hats in place when working in strong wind, upside down, and sideways. For protection from more than just falling objects, these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head. Made of ABS plastic, they resist impacts better than standard hard hats. A foam shell reduces the force on the head and neck during impact by absorbing the force.

A sweatband keeps perspiration out of your eyes, and the padding has high-purity silver embedded in it to resist odor. To add a face shield, earmuffs, and other accessories, use the mounting slots on the sides.

Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts.

Hard hats with MIPS (multi-directional impact protection system) provide more protection to your brain than standard climbing-style hard hats. A low-friction layer inside the helmet allows your head to shift slightly during an impact. This shift directs rotational force away from the brain, so it causes less damage. These hard hats also have clamps for headlamp straps.

Hard hats with brim grip can be securely grasped by the back while wearing gloves. These hard hats also have a magnetic clasp, so you can connect and release the straps with one hand.

Made from a material similar to that used in firefighters' helmets.

Hard hats are Type I, Class E, meaning they protect against blows to the top of the head only and are proof-tested at 20,000 volts.

Pinlock suspensions adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

Often used when operating a crane or climbing a ladder, these hard hats won’t block your view of what’s above you. With a see-through brim, they increase peripheral visibility by 50% compared to standard hard hats with a full brim. Clear in the front and opaque in the back, the brim wraps all the way around to keep rain off your head and sun off your neck. Swap in a gray visor (sold separately) for a shaded view in full-sun environments. A built-in sweatband keeps perspiration out of your eyes.

Rated Type I, these hard hats protect the top of your head from falling objects. They’re also rated Class E and have been tested at 20,000 volts for electrical insulation. Adjust the suspension with a ratchet for a snug fit. Use the mounting slots to attach face shields, earmuffs, and other equipment.

Spot sun damage that weakens your hard hat so you know when it’s time to replace it. These hard hats make the invisible damage visible with a red patch that gradually changes to white the longer it’s exposed to UV rays. Rated Type I, these hard hats protect against blows from falling objects to the top of the head. They have mounting slots for attachments such as face shields and earmuffs. To adjust the fit, turn the ratchet in the back. These hard hats have a sweatband to keep perspiration out of your eyes.

Class E hard hats insulate from electrical shocks and are often used near overhead power lines and high-voltage equipment. They’re tested at 20,000 volts.

Hard hats with a full brim keep rain and sun off your face, neck, and the sides of your head.

Hard hats with reversible suspension let you swing the brim to the back of your head without taking them off or adjusting the suspension.

Stand out in low light—often used for construction underground or at night, these hard hats glow for up to 48 hours. Rated Type I, Class E, they protect against blows to the top of the head and are tested at 20,000 volts for electrical insulation. To adjust the fit, turn the ratchet in the back. These hard hats have a sweatband to keep perspiration out of your eyes.

Hard hats with a full brim keep rain and sun off your face, neck, and the sides of your head.

Hard hats with reversible suspension let you swing the brim to the back of your head without taking them off or adjusting the suspension. They also have mounting slots for attachments such as face shields and earmuffs.

These hard hats give all-in-one head, face, and ear protection. You can lift the face shield and earmuffs when not in use. Turn the ratchet in the back to adjust for a secure fit.

Type I, Class E hard hats protect against blows to the top of the head only and are proof-tested at 20,000 volts.

Shield your eyes from dust and spray and protect your head from falling objects. These hard hats have a visor that slides inside their hard shell to prevent scratches when you’re not working. It also fits over glasses. Since they don’t have brims, these hard hats won’t limit your field of vision or keep you from getting close to your task.

Hard hats are Type I, Class E, meaning they protect against blows to the top of the head only and are proof-tested at 20,000 volts. All have a ratchet suspension that adjusts with an easy-turn knob and mounting slots to attach earmuffs (not included).

Add a chin strap (sold separately) to your hard hat for a more secure fit when climbing, working upside down, or moving around.

Protect your face from low-level arc flashes when a full hood is not necessary. These shields meet NFPA 70E standards for protection against electrical arc flashes for personal protective equipment (PPE) category 2. Choose shields that meet the arc rated PPE category required by your workplace.

The shields meet ANSI/ISEA Z87.1 basic impact standards when worn with safety glasses or goggles. The lens on these shields flips up, so you can keep your hard hat on during breaks from electrical work. All hard hats have a ratchet suspension that adjusts with an easy-turn knob.

Shields with a green lens have a light tint that absorbs visible light and blocks glare. They let through 55% of visible light. While the green tint reduces glare, it also distorts colors, which may limit your ability to distinguish them.

Shields with a bronze or gray lens allow all wavelengths of visible light to pass through without distorting colors. They’re ideal for electrical workers who work with colored wires or electrical tape.

Shields with a chin guard protect your face from below. Those with side guards extend protection on the sides.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.

Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).