About Cam Latches and Locks
More
Snap-In Recessed Pull Handles
Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of plastic, all of these handles resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | |||||||
|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Back Projection | Ht. | Wd. | For Panel Thick. | Each | |
Style A | |||||||
Black Plastic | |||||||
| 1" | 3 15/16" | 11/16" | 0.85" | 3.827" | 0.03" | 0000000 | 00000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.04"-0.055" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.055"-0.07" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.07"-0.085" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.085"-0.1" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.04"-0.055" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.055"-0.07" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.07"-0.085" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.085"-0.1" | 0000000 | 0000 |
| 1 1/2" | 2 3/4" | 11/16" | 1.283" | 2.587" | 0.03" | 0000000 | 0000 |
| 1 3/4" | 3 15/16" | 7/8" | 1.575" | 3.791" | 0.03" | 0000000 | 0000 |
Style B | |||||||
Black Plastic | |||||||
| 1 1/2" | 2 3/4" | 9/16" | 1.13"-1.213" | 1.811" | 0.02"-0.125" | 0000000 | 0000 |
| 1 3/4" | 3 9/16" | 9/16" | 1.366"-1.449" | 2.6" | 0.02"-0.125" | 0000000 | 0000 |
| 2" | 4 5/16" | 9/16" | 1.602"-1.685" | 3.464" | 0.02"-0.125" | 0000000 | 0000 |
| 2 1/2" | 5 1/2" | 9/16" | 2.154"-2.236" | 4.488" | 0.02"-0.125" | 0000000 | 0000 |
Off-White Plastic | |||||||
| 2" | 4 5/16" | 9/16" | 1.602"-1.685" | 3.464" | 0.02"-0.125" | 0000000 | 0000 |
| 2 1/2" | 5 1/2" | 9/16" | 2.154"-2.236" | 4.488" | 0.02"-0.125" | 0000000 | 0000 |
Snap-In Triangle-Drive Cam Locks
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. The locks help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage.
These locks open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.
All of these locks include one cam with a fixed latching distance. Since you won’t have to adjust the cam into position, they are faster to install than those with an adjustable latching distance.
Locks with a pull tab make it easier to open doors than other locks that don’t have an added grip.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Offset Cam | Replacement Keys | ||||||||||||
| For Max. Thick. | Latching Distance | Triangle Size, mm | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | For Use On | Environmental Rating | Each | Each | |||
Black Nylon Plastic with Pull Tab | ||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||
| C | 0.079" | 27/32" | 6.5 | 7/8" | 1 7/8" | 1 1/4" | 1 3/8" | 3/4" | Metal | IP65 | 0000000 | 000000 | 0000000 | 00000 |
| C | 0.079" | 1 5/32" | 6.5 | 7/8" | 1 7/8" | 1 1/4" | 1 3/8" | 3/4" | Metal | IP65 | 0000000 | 00000 | 0000000 | 0000 |
Snap-In Two-Way-Drive Cam Locks
Quickly snap these locks into a through-hole cutout—no need to fasten them with a screw. They fit snugly in their cutout to stand up to the same vibration that traditional cam locks withstand. These locks open with a two-way key, also called a double-bit key. This means they match a keying system that’s common for industrial enclosures, but they’re more secure than locks that open with a hex key or screwdriver. Their flat, concealed design also stops others from tampering with them using pliers.
These locks include one cam with a fixed latching distance. Since you don’t have to adjust the cam into position, they’re faster to install than those with an adjustable latching distance. The cam rotates 90° to secure enclosures, so they’re also known as quarter-turn locks. Made of nylon, these locks are lightweight and won’t corrode from moisture. They help keep your sealed enclosure’s contents safe from dust and water damage, maintaining your enclosure’s IP65 rating.
Locks with a pull tab give you a spot to grab to easily open doors and panels.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Offset Cam | Replacement Keys | |||||||||||||
| Style | For Max. Thick. | Latching Distance | Key Size, mm | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | Opens With | For Use On | Environmental Rating | Each | Each | ||
Black Nylon Plastic | |||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||||||
| B | 0.079" | 27/32" | 3 | 7/8" | 1 7/8" | 1 1/4" | 1 3/8" | 3/4" | Pull Tab, Two-Way Key | Metal | IP65 | 0000000 | 000000 | 0000000 | 00000 |
| B | 0.079" | 1 5/32" | 3 | 7/8" | 1 7/8" | 1 1/4" | 1 3/8" | 3/4" | Pull Tab, Two-Way Key | Metal | IP65 | 0000000 | 00000 | 0000000 | 0000 |
Snap-In Keyed Alike Cam Locks
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Choose these locks if you need several locks that open with the same key.
Plastic locks resist corrosion better than zinc locks so they’re best for damp and humid environments. They also help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage. All have a pull tab that makes it easier to open doors than other locks that don’t have an added grip. They mount in a standard installation hole.
For technical drawings and 3-D models, click on a part number.
Head | Straight Cam | Offset Cam | For Cutout | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | Key Number | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Ht. | Wd. | Opens With | For Use On | Environmental Rating | Each | ||
Black Nylon Plastic with Steel Cam | |||||||||||||||||
Quarter-Turn Clockwise to Open | |||||||||||||||||
| A | 0.079" | 25/32" | G9233 | 3/4" | 1 7/8" | 1 1/4" | 1 3/4" | 3/4" | __ | __ | 3/4" | 21/32" | Key, Pull Tab | Metal | IP65 | 0000000 | 000000 |
| A | 0.079" | 15/16" | G9233 | 3/4" | 1 7/8" | 1 1/4" | __ | __ | 1 3/4" | 3/4" | 3/4" | 21/32" | Key, Pull Tab | Metal | IP65 | 0000000 | 00000 |
Snap-In Keyed Cam Locks
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All fit snugly in their cutout to stand up to the same vibration as a traditional cam lock will. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. Each cam has a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Choose these locks if you need locks that each open with a different key.
Plastic locks resist corrosion better than zinc locks so they’re best for damp and humid environments. They also help maintain your sealed enclosure's IP rating for low-pressure washdowns to help keep their contents safe from water damage. All have a pull tab that makes it easier to open doors than other locks that don’t have an added grip. They mount in a standard installation hole.
For technical drawings and 3-D models, click on a part number.
Head | Straight Cam | Offset Cam | For Cutout | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Ht. | Wd. | Opens With | For Use On | Environmental Rating | Each | ||
Black Nylon Plastic with Steel Cam | ||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||
| A | 0.079" | 25/32" | 3/4" | 1 7/8" | 1 1/4" | 1 3/4" | 3/4" | __ | __ | 3/4" | 21/32" | Key, Pull Tab | Metal | IP65 | 0000000 | 000000 |
| A | 0.079" | 15/16" | 3/4" | 1 7/8" | 1 1/4" | __ | __ | 1 3/4" | 3/4" | 3/4" | 21/32" | Key, Pull Tab | Metal | IP65 | 0000000 | 00000 |