Hand Winches for Wire Rope—For Horizontal Pulling
Turn the crank to move material horizontally. These winches wind faster than precise-positioning winches.
Winches with two speeds wind quickly in high gear and more easily in low gear than single-speed winches.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
| Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | |
| 600 | 275 | 61 | 5/32" | 3 5/8" | 3 7/8" | 5 1/8" | 5 1/4" | 4" | 7" | Steel | 3.2:1 | 00000000 | 000000 |
| 900 | 450 | 40 | 3/16" | 3 5/8" | 3 7/8" | 5 1/8" | 5 1/4" | 4" | 7" | Steel | 3.2:1 | 00000000 | 00000 |
| 1,100 | 500 | 79 | 3/16" | 3 5/8" | 5 1/8" | 5 1/8" | 6 7/8" | 5 3/8" | 7" | Steel | 3.7:1 | 00000000 | 00000 |
| 1,400 | 725 | 40 | 1/4" | 4" | 5 1/8" | 5 5/8" | 7" | 5 5/8" | 10" | Steel | 4.4:1 | 00000000 | 00000 |
| 2,000 | 1,000 | 58 | 1/4" | 4 3/4" | 6 1/4" | 6 1/2" | 8 7/8" | 6 7/8" | 10" | Steel | 5.4:1, 12.4:1 | 00000000 | 000000 |
| 2,500 | 1,300 | 47 | 5/16" | 4 7/8" | 7" | 6 1/2" | 9 1/2" | 7 1/2" | 10" | Steel | 5.4:1, 17.3:1 | 00000000 | 000000 |
| 3,200 | 1,850 | 30 | 3/8" | 4 7/8" | 7" | 6 1/2" | 9 1/2" | 7 1/2" | 10" | Steel | 5.4:1, 17.3:1 | 00000000 | 000000 |
| 3,700 | 1,450 | 90 | 7/32" | 7 1/8" | 8 5/8" | 8 3/4" | 11 1/8" | 7 1/8" | 10" | Steel | 5.1:1, 12.2:1 | 000000 | 000000 |
Precise-Positioning Heavy Duty Hand Winches
for Wire Rope—For Horizontal Pulling
One-piece gears provide more durability than the riveted gears of other hand winches. These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.
For wire rope, see Wire Rope with Hook for Winches.
Enclosed gears offer protection from dirt and debris.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
| Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | |
Open | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 750 | 400 | 59 | 3/16" | 4 1/2" | 5 3/4" | 6 3/8" | 6 1/2" | 5 1/2" | 9" | Steel | 20:1 | 0000000 | 0000000 |
Enclosed Gears | |||||||||||||
| 1,000 | 500 | 61 | 3/16" | 3 1/2" | 4 1/2" | 5 7/8" | 7 3/4" | 5 5/8" | 9" | Steel | 15:1 | 000000 | 000000 |
| 2,000 | 1,300 | 77 | 1/4" | 5" | 6 3/4" | 8" | 10 1/8" | 7 1/8" | 7" | Steel | 24:1 | 000000 | 000000 |
| 4,000 | 2,500 | 140 | 3/8" | 8" | 9" | 12 1/2" | 14" | 12 1/2" | 12" | Steel | 26:1 | 000000 | 00000000 |
Precise-Positioning Hand Winches for Wire Rope—For Horizontal Pulling
These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Drill-Wind Precise-Positioning Hand Winches
for Wire Rope—For Horizontal Pulling
Remove the handle to wind these winches with a power drill.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
| Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Hex Shank Size | For Max. Drill Speed, rpm | Material | Gear Speed Ratio | Each | |
| 2,000 | 800 | 55 | 1/4" | 4 3/8" | 5 1/2" | 6" | 7 1/2" | 5 7/8" | 7" | 5/8" | 600 | Steel | 40.1:1 | 0000000 | 0000000 |
Hand Winches for Webbing—For Horizontal Pulling
Webbing wraps neatly around the winch to prevent tangles in the line.
Ratchet handle pumps up and down rather than turning completely around the winch and is good for tight spaces.
Winches with two speeds wind quickly in high gear and more easily in low gear.
Note: Capacity is highest for the first layer of webbing (at least five wraps of webbing on the winch) and decreases as each additional layer of webbing is wound on the winch.
Winches | Replacement Webbing with Hook on One End | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Cap., lbs. | Fully Wound Cap., lbs. | Webbing Wd. | Webbing Lg., ft. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Features | Each | Each | ||
| 400 | 175 | 2" | 12 | 3 3/4" | 4 3/4" | 4 3/8" | 9" | Steel | 1:1 | Ratchet Handle, Webbing with Eye | 0000000 | 000000 | 0000000 | 000000 |
| 1,100 | 500 | 2" | 15 | 5 1/8" | 6 7/8" | 5 3/8" | 7" | Steel | 3.7:1 | __ | 0000000 | 00000 | 0000000 | 00000 |
| 1,600 | 775 | 2" | 20 | 5 3/4" | 7 1/2" | 6 3/4" | 10" | Steel | 5.4:1 | __ | 0000000 | 000000 | 0000000 | 00000 |
| 2,000 | 1,050 | 2" | 20 | 6 1/2" | 8 7/8" | 6 7/8" | 10" | Steel | 12.4:1, 5.4:1 | __ | 0000000 | 000000 | 0000000 | 00000 |
| 2,500 | 1,300 | 2" | 25 | 6 1/2" | 9 1/2" | 7 1/2" | 10" | Steel | 17.3:1, 5.4:1 | __ | 0000000 | 000000 | 0000000 | 00000 |
| 3,200 | 1,850 | 2" | 20 | 6 1/2" | 9 1/2" | 7 1/2" | 10" | Steel | 17.3:1, 5.4:1 | __ | 0000000 | 000000 | 0000000 | 00000 |
Heavy Duty Hand Winches for Wire Rope—For Lifting
Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Min. Cap., lbs. | Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | |
| 100 | 1,000 | 500 | 43 | 3/16" | 3 11/16" | 5" | 8 1/8" | 7 9/32" | 6 1/8" | 11" | Steel | 2.85:1 | 0000000 | 0000000 |
| 100 | 2,000 | 1,200 | 39 | 5/16" | 5 5/16" | 6" | 10 25/32" | 10" | 7 5/32" | 11" | Steel | 14.7:1 | 0000000 | 000000 |
| 100 | 2,000 | 1,200 | 77 | 5/16" | 8 5/16" | 6" | 13 25/32" | 10" | 7 5/32" | 11" | Steel | 14.7:1 | 0000000 | 000000 |
| 100 | 4,000 | 2,500 | 83 | 3/8" | 9 1/2" | 12 1/2" | 16 7/16" | 15 1/4" | 10 11/16" | 19" | Steel | 19.54:1 | 0000000 | 00000000 |
Drill-Wind Precise-Positioning Heavy Duty
Hand Winches for Wire Rope—For Lifting
Remove the handle to wind this winch with a power drill and move loads more gradually than with other winches. Its one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winch above the load or use winch with a pulley that's mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
| Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Hex Shank Size | For Max. Drill Speed, rpm | Duty Cycle @ Maximum Capacity | Material | Gear Speed Ratio | Each | |
| 2,000 | 1,200 | 77 | 1/4" | 6 5/8" | 7 1/4" | 11 1/2" | 13 1/2" | 8 1/2" | 11" | 1 1/8" | 400 | 15 Minutes On, 45 Minutes Off | Steel | 32:1 | 0000000 | 000000000 |
Wall-Mount Heavy Duty Hand Winches for Wire Rope—For Lifting
Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
Fully enclosed body offers protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Corrosion-Resistant Heavy Duty Hand Winches for Wire Rope—For Lifting
These winches are stainless steel for corrosion resistance. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
| Min. Cap., lbs. | Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | |
| 100 | 1,000 | 600 | 83 | 1/4" | 5 1/4" | 6" | 9 3/4" | 8 1/4" | 6 7/8" | 11" | Stainless Steel | 3.83:1 | 00000000 | 000000000 |
| 100 | 2,000 | 1,200 | 39 | 5/16" | 5 5/16" | 6" | 10 3/4" | 10" | 7 1/8" | 11" | Stainless Steel | 14.7:1 | 00000000 | 00000000 |
Precise-Positioning Heavy Duty Hand Winches for Wire Rope—For Lifting
Move loads more gradually than with other winches. These take longer to wind but require less effort. Their one-piece machined gears stand up to daily use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
| Min. Cap., lbs. | Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | |
| 100 | 1,000 | 500 | 61 | 3/16" | 3 1/2" | 4 1/2" | 7 5/8" | 7 1/2" | 5 5/8" | 11" | Steel | 15:1 | 0000000 | 0000000 |
| 100 | 4,000 | 2,500 | 140 | 3/8" | 8" | 9" | 15 1/2" | 14 1/8" | 12 3/4" | 18" | Steel | 26:1 | 0000000 | 00000000 |
Hand Winches for Wire Rope—For Lifting
Enclosed Gears
and Right-Side Handle
These winches are designed for occasional use. An automatic brake holds the load when the handle is released. To lift, mount winches above the load or use winches with a pulley that's mounted above the load.
For wire rope, see Wire Rope with Hook for Winches.
Enclosed gears offer protection from dirt and debris.
Winches with a left-side handle are more comfortable for left-handed users to operate, and can be used in spaces where right-side handles can’t fit. Winches with a right- or left-side handle are convertible, letting you easily switch between your left and right hand.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Winches | Replacement Handles | Replacement Springs | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. Cap., lbs. | Max. Cap., lbs. | Fully Wound Cap., lbs. | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Handle Lg. | Material | Gear Speed Ratio | Each | Each | Each | |||
Open | ||||||||||||||||||
Right-Side Handle | ||||||||||||||||||
| 50 | 350 | 100 | 84 | 1/8" | 3 7/8" | 5 1/8" | 6" | 5 1/2" | 4 1/8" | 7" | Steel | 3.2:1 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| 50 | 800 | 300 | 68 | 3/16" | 3 7/8" | 5 1/8" | 6 1/8" | 6 5/8" | 5 1/2" | 7" | Steel | 4.4:1 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 50 | 1,200 | 500 | 69 | 7/32" | 3 7/8" | 5 1/8" | 6 1/8" | 7 1/2" | 6 3/4" | 7" | Steel | 5.4:1 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| 75 | 1,500 | 625 | 60 | 1/4" | 4 3/4" | 5 1/2" | 7 1/4" | 8 1/8" | 6 7/8" | 9" | Steel | 5.4:1 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| 175 | 2,500 | 1,000 | 34 | 5/16" | 4 7/8" | 7" | 7 1/8" | 9 1/2" | 7 1/2" | 9" | Steel | 17.3:1 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
Left-Side Handle | ||||||||||||||||||
| 50 | 800 | 300 | 68 | 3/16" | 3 5/8" | 5 1/8" | 6 1/8" | 6 5/8" | 5 1/2" | 7" | Steel | 4.4:1 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| 50 | 1,200 | 500 | 69 | 7/32" | 3 5/8" | 5 1/8" | 6 1/8" | 7 1/2" | 6 3/4" | 7" | Steel | 5.4:1 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
Right- or Left-Side Handle | ||||||||||||||||||
| 75 | 1,500 | 700 | 50 | 1/4" | 4 3/4" | 5 1/2" | 7 1/8" | 8 1/8" | 6 7/8" | 9" | Steel | 5.4:1 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Enclosed Gears | ||||||||||||||||||
Right-Side Handle | ||||||||||||||||||
| 75 | 1,200 | 625 | 46 | 7/32" | 3 5/8" | 6 1/8" | 7 1/8" | 7 3/4" | 5 3/4" | 12" | Steel | 4:1 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 150 | 1,500 | 625 | 45 | 1/4" | 3 5/8" | 7 1/8" | 7 5/8" | 8 5/8" | 6 5/8" | 12" | Steel | 6:1 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 300 | 2,500 | 1,300 | 40 | 5/16" | 5 5/8" | 9 5/8" | 9 3/8" | 11 3/8" | 7" | 12" | Steel | 12:1 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 500 | 3,500 | 1,825 | 28 | 3/8" | 5 5/8" | 9 5/8" | 9 5/8" | 11 1/4" | 7 1/8" | 12" | Steel | 18.75:1 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |