One-Step Hammer-Driven Gasket and Washer Punch Sets
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Aluminum, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | Steel | Plastic Case | 00000000 | 0000000 |
| 10 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16" | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm | Steel | Plastic Case | 00000000 | 000000 |
| 25 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2" | Steel | Plastic Case | 00000000 | 000000 |
| 29 Punches, Handle | 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm | Steel | Plastic Case | 00000000 | 000000 |
Replacement Punches
| For Hole Dia. | Material | Each | |
| 1/8" | Steel | 00000000 | 000000 |
| 3/16" | Steel | 00000000 | 00000 |
| 1/4" | Steel | 00000000 | 00000 |
| 5/16" | Steel | 00000000 | 00000 |
| 3/8" | Steel | 00000000 | 00000 |
| 7/16" | Steel | 00000000 | 00000 |
| 1/2" | Steel | 00000000 | 00000 |
| 9/16" | Steel | 00000000 | 00000 |
| 5/8" | Steel | 00000000 | 00000 |
| 3/4" | Steel | 00000000 | 00000 |
| 7/8" | Steel | 00000000 | 00000 |
| 1" | Steel | 00000000 | 00000 |
| 1 1/16" | Steel | 00000000 | 00000 |
| 1 1/8" | Steel | 00000000 | 00000 |
| 1 3/16" | Steel | 00000000 | 00000 |
| 1 1/4" | Steel | 00000000 | 00000 |
| 1 5/16" | Steel | 00000000 | 00000 |
| 1 3/8" | Steel | 00000000 | 00000 |
| 1 7/16" | Steel | 00000000 | 00000 |
| 1 1/2" | Steel | 00000000 | 00000 |
| 1 5/8" | Steel | 00000000 | 00000 |
| 1 11/16" | Steel | 00000000 | 00000 |
| 1 3/4" | Steel | 00000000 | 00000 |
| 1 7/8" | Steel | 00000000 | 00000 |
| 2" | Steel | 00000000 | 00000 |
| 2mm | Steel | 000000000 | 00000 |
| 3mm | Steel | 000000000 | 00000 |
| 4mm | Steel | 000000000 | 00000 |
| 5mm | Steel | 000000000 | 00000 |
| 6mm | Steel | 00000000 | 00000 |
| 8mm | Steel | 00000000 | 00000 |
| 10mm | Steel | 00000000 | 00000 |
| 12mm | Steel | 00000000 | 00000 |
| 14mm | Steel | 00000000 | 00000 |
| 16mm | Steel | 00000000 | 00000 |
| 18mm | Steel | 00000000 | 00000 |
| 20mm | Steel | 00000000 | 00000 |
| 22mm | Steel | 000000000 | 00000 |
| 24mm | Steel | 000000000 | 00000 |
| 26mm | Steel | 000000000 | 00000 |
| 28mm | Steel | 000000000 | 00000 |
| 30mm | Steel | 000000000 | 00000 |
| 32mm | Steel | 000000000 | 00000 |
| 34mm | Steel | 000000000 | 00000 |
| 36mm | Steel | 000000000 | 00000 |
| 38mm | Steel | 000000000 | 00000 |
| 40mm | Steel | 00000000 | 00000 |
| 42mm | Steel | 000000000 | 00000 |
| 44mm | Steel | 000000000 | 00000 |
| 46mm | Steel | 00000000 | 00000 |
| 48mm | Steel | 000000000 | 00000 |
| 50mm | Steel | 000000000 | 00000 |
Economy Hammer-Driven Gasket and Washer Punch Sets
This set includes common ID and OD sizes to create gaskets and washers in two strikes.
For technical drawings and 3-D models, click on a part number.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 000000 |
Quick-Release Hammer-Driven Gasket and Washer Punch Sets
Quickly switch between inner and outer punches to create washers faster than with standard sets.
For technical drawings and 3-D models, click on a part number.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Fiberglass, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 7 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 0000000 |
| 13 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
| Includes | For Hole Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fabric, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | ||||||
|---|---|---|---|---|---|---|
| 9 Punches | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
| 9 Punches | 3.5mm, 5mm, 7mm, 8.5mm, 10mm, 11.5mm, 13.5mm, 16.5mm, 19.5mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Self-Aligning Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
| Includes | For Hole Dia. | Pilot Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 4 Punches, 4 Pilots | 7/8", 1", 1 1/8", 1 1/4" | 3/4", 7/8", 1", 1 1/8" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
| 9 Punches, 8 Pilots | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" | 1/64" | Steel | Plastic Case | 0000000 | 000000 |
| 10 Punches, 9 Pilots | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm, 20mm | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Small Hole Punch Sets
Screw one of the interchangeable heads into the included handle to create holes in your material.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Handle Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 7 Interchangeable Screw-In Punch Heads, Handle | 5/64", 3/32", 7/64", 1/8", 5/32", 11/64", 3/16" | 3 1/2" | Steel | 000000 | 000000 |
Hammer-Driven Hole Punch Sets
The handle and punch are one complete tool.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 6 Punches | 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" | Steel | Plastic Pouch | 0000000 | 000000 |
| 6 Punches | 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Fabric, Leather, Rubber | |||||
| 5 Punches, 5"-Lg. Awl, 7"-Lg. Snips with a 1 3/4" Cut Length | 1/4", 3/8", 1/2", 5/8", 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 5 Punches | 1 1/16", 1 1/4", 1 3/8", 1 5/8", 1 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Nylon Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Cork, Fabric, Leather, Rubber | |||||
| 6 Punches | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | Steel | Plastic Pouch | 0000000 | 00000 |