Create a high-intensity lighting system for inspecting small and microscopic parts. To create a complete lighting system, you need a fiber-optic light, fiber-optic cable, and an adapter to connect the cable to the light. They cast a neutral white light often found in workspaces.

Add a probe to 1/8" dia. fiber-optic cables to illuminate small areas that have recessed or deep orifices.

Pair a focusing lens with a positionable cable to create a concentrated beam of light on your work.

Also known as pendant lights, these fixtures hang from a cord. They work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Install sockets for medium (standard household) screw-in base light bulbs.

Styles A-C mount to outlet boxes.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen and incandescent bulbs (sold separately).

Lights with a zinc housing are more impact resistant than those with an aluminum housing.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Style B detect motion up to 68 feet away. They are compatible with LED, halogen, and incandescent bulbs (sold separately).

These lights swing out from the wall to illuminate loading docks and trailers. They have a steel arm, plastic lens, and switch. All have a cord with three-prong plug and operate on 120 volts AC. Lights have four or six mounting holes (hardware not included, except Style D includes hardware). All are yellow.

Styles A-C are compatible with medium-base CFL (Compact flourescent), halogen, incandescent, and LED bulbs (sold separately). All have a zinc-plated steel guard to protect the lens.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.

This light is sealed to withstand shallow water, such as ponds and fountains. It has a durable tempered-glass lens to protect the bulb. It's furnished with a halogen bulb that casts a warm, yellow-toned light that's similar in apprearance to incandescent lights.

Turn an overhead outlet or an extension cord into a temporary light. These sockets have a two-prong plug for a quick connection.

Hardwire these sockets to a power source.

For technical drawings and 3-D models, click on a part number.

Lights meet NEMA 4X for protection from corrosion and washdowns.

The clear replacement lens is intended for use with the white light color.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

304 stainless steel and aluminum lights meet NEMA 3 for protection from corrosion and wet environments.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.

Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

For technical drawings and 3-D models, click on a part number.