We will reply to your message within an hour.
Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.
Thick side plates allow this chain to handle greater capacity than standard chain.
This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.
This treated steel chain has over eight times the capacity of stainless steel chain.
Made of 316 stainless steel, this is our most corrosion-resistant chain.
With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.
A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.
This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.
Through-hardened pins keep these chains strong over time while handling frequent jolts from motor startups, emergency braking, and sudden reversing.
Made of stainless steel, this chain has excellent corrosion resistance.
This treated steel chain has over six times the capacity of stainless steel chain.
The flat, oblong side plates on this chain make it ideal for conveying items in manufacturing and packaging lines.
With wide gaps between each side plate, debris in dirty environments falls through this chain instead of building up.
This steel chain handles higher loads than stainless steel chain.
Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.
This chain is made of steel.
This treated steel chain has over seven times the capacity of stainless steel chain.
Also known as quick links, these links thread closed by hand or with a wrench.
Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.
Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.
The twisted shape of these links prevents loads from rotating or knotting.
The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.
Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.
Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.
Often used with transport chain, these links are good for binding, tying down, and pulling loads.
Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.
The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.
Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.
Hang, pull, and secure loads. These rings are good for general non-lifting applications.
Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.
Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.
Use these links for general lifting applications.
Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.
Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.
Once secured with the included locking pin, these links must be cut off to be removed.
The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.
The wide end of these links has more room for attachments than standard figure-eight links.