We will reply to your message within an hour.
Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders.
Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.
Move grippers, printing heads, and other devices in areas constantly exposed to dust and powders as fine as flour.
Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment.
Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.
With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.
Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.
Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions.
For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length.
Push one object while pulling another—when one head on these air slides extends, the other retracts.
Cylinders have two parallel piston rods that prevent twisting as they extend and retract.
Hold your piston's position during an emergency stop or power loss to keep your load safely in place. These rod locks also prevent your piston from drifting past its stopped position as it wears and loses precision.
Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.
Keep tools from twisting while moving them back and forth.