About Installing Blind Rivets
More
Blind Rivets for Wood
An alternative to wood screws, these rivets have a grooved body that expands during installation, digging into the wood and creating a secure hold. They are for use in closed-end holes. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Min. Hole Dp. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength | Tensile Strength  | Material | Pkg. Qty. | Pkg. | |
Steel Mandrel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
0.133" Dia. | |||||||||||
| 0.482" | 0.381" | 0.138" | No. 29 | 0.262" | 0.043" | Not Rated | Not Rated | 5000 Series Aluminum | 100 | 000000000 | 000000 |
0.157" Dia. | |||||||||||
| 0.433" | 0.315" | 0.169" | No. 18 | 0.313" | 0.039" | Not Rated | Not Rated | 5154 Aluminum | 100 | 000000000 | 00000 |
| 0.591" | 0.472" | 0.169" | No. 18 | 0.313" | 0.039" | Not Rated | Not Rated | 5154 Aluminum | 100 | 000000000 | 00000 |
0.188" Dia. | |||||||||||
| 0.433" | 0.315" | 0.2" | No. 5 | 0.375" | 0.043" | Not Rated | Not Rated | 5154 Aluminum | 50 | 000000000 | 0000 |
| 0.591" | 0.472" | 0.2" | No. 5 | 0.375" | 0.043" | Not Rated | Not Rated | 5154 Aluminum | 50 | 000000000 | 0000 |
| 0.669" | 0.551" | 0.2" | No. 5 | 0.375" | 0.043" | Not Rated | Not Rated | 5154 Aluminum | 50 | 000000000 | 00000 |
0.197" Dia. | |||||||||||
| 0.691" | 0.59" | 0.205" | No. 5 | 0.386" | 0.063" | Not Rated | Not Rated | 5000 Series Aluminum | 50 | 000000000 | 00000 |
Locking-Collar Rivets
Also known as magna-grip lockbolts, these are the strongest rivets we offer. Consisting of a ribbed rivet and a collar (sold separately), they have the holding power to withstand excessive vibration, expansion, and contraction.
Installation requires access to both sides of the material and a locking collar rivet tool. The tool pulls the rivet to the collar, clinches it in place, and clips off any excess length.
For technical drawings and 3-D models, click on a part number.
Rivets | Collars | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Material | Pkg. Qty. | Pkg. | Flange Dia. | Flange Ht. | Pkg. Qty. | Pkg. | ||
3/16" Dia. | ||||||||||||||||
| 0.063"-0.625" | 1.875" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 00000 | 0.385" | 0.052" | 10 | 000000000 | 00000 |
| 0.313"-1.25" | 2.75" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.385" | 0.052" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||||||||||||
| 0.063"-0.625" | 2" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
| 0.313"-1.25" | 2.625" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
Air Inlet | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pull Capacity, lbs. | Stroke Lg. | Operating Air Pressure, psi | Average Air Consumption, cfm | Pipe Size | Gender | Air Hose Included | Each | |
| 5,200 | 5/8" | 90-100 | 1.5 | 1/4 | Female | No | 000000000 | 000000000 |