Use these wheels for light grinding, deburring, and sharpening.

Made with aluminum oxide in a diamond pattern, these flexible wheels remove mill scale from metal, including pipe, in a single step.

The flexible backing on these wheels conforms to curved and rough surfaces.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.

Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flap sanding discs.

A coating prevents dust and debris from building up on the abrasive surface.

Set at an angle and widely spaced, the flaps reach into corners.

A special fastener on the back of these discs allows you to easily swap one disc for another.

These discs have a harder abrasive than standard quick-change discs.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Fit these discs over your tool's arbor.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.

Use these wheels to cut through metal such as iron, stainless steel, and steel.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.

These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.

The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel.