Use these wheels for light grinding, deburring, and sharpening.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.

Wheels remove more material than other grinding wheels with cotton laminate.

Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.

Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Produce a smooth surface on precise, intricate grinding jobs.

Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.

Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.

The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.

Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flap sanding discs for corners.

A coating prevents dust and debris from building up on the abrasive surface.

Set at an angle and widely spaced, the flaps reach into corners.

A special fastener on the back of these discs allows you to easily swap one disc for another.

These discs have a harder abrasive than standard quick-change discs.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Fit these discs over your tool's arbor.

The premium abrasive stays sharp longer.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Holes allow dust removal when used with a vacuum sander.

These discs have a long-lasting diamond abrasive.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.