Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.

Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.

Remove material and shape metal cylindrical forms or parts without the need for centers or fixtures.

Quickly remove vinyl, decals, tape, and double-sided molding striping and trim without damaging the surface below.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

Furnished with multiple points, these clean faster and leave a more uniform finish than single-point cleaners.

With an X-shaped arbor hole, these wheels quickly and safely click into X-lock grinders without wrenches or flange nuts.

Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants.

Made with diamond, the strongest abrasive material, these wheels are extremely hard and wear resistant, so they stand up to ceramics and glass.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.

Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.

With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel.

Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper.

An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel.

These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.

The loose weave of the reinforcement material means more of the abrasive grain contacts the metal as you're cutting for a faster cut than standard cutoff wheels.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.

These wheels have a zirconia alumina abrasive for cutting ductile cast iron.

These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.

These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.

From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel.

Make cuts in most metal, including aluminum, iron, stainless steel, and steel.