Bench and Pedestal Grinding Wheels for Carbide, Ceramics, and Glass
The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.
Wheels are made of diamond-coated steel molded onto plastic, so they can be used wet or dry. Diamond is extremely hard and wear resistant.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Abrasive Surface | Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Type | Shape | Choose a Grit (Surface Texture, Color) | Each | |
For Carbide, Ceramics, Glass | ||||||||||
Unthreaded Arbor Hole | ||||||||||
| Edge | 6" | 3/4" | 1 1/4" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 0000000 | |
| Edge | 6" | 1" | 1 1/4" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 000000 | |
| Partial Face | 6" | 3/4" | 1 1/4" | 3,820 | Diamond | Type 2 | Cylinder | 0000000 | 000000 | |
| Full Face | 6" | 1/2" | 1/2" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 000000 | |
Shaped Norton Toolroom Grinding Wheels for Metals
The special shapes of these wheels provide more clearance than typical straight wheels.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as 32A wheels.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
5SG Blue—VS Bond | |||||||||||
For Aluminum, Brass, Bronze, Carbides, Ceramics, Composites, Copper, Fiberglass, Glass, Plaster, Plastic, Rubber, Stone, Titanium | |||||||||||
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 60 (Rough) | L | 00000000 | 000000 |
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 80 (Smooth) | J | 000000000 | 00000 |
Norton Toolroom Grinding Wheels for Soft Metals
Unlike aluminum oxide wheels, these silicon carbide wheels won't clog when grinding soft metals.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
39C Green—VK Bond | |||||||||||
For Aluminum, Brass, Bronze, Titanium, Carbide | |||||||||||
| 6" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 60 (Rough) | I | 0000000 | 0000000 |
| 6" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 120 (Smooth) | I | 0000000 | 000000 |
| 7" | 1 1/2" | 1 3/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 60 (Rough) | I | 0000000 | 000000 |
| 7" | 1 1/2" | 1 3/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 120 (Smooth) | I | 0000000 | 000000 |
39C Green—VMT Bond | |||||||||||
For Aluminum, Brass, Bronze, Titanium, Carbide | |||||||||||
| 6" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 80 (Smooth) | I | 0000000 | 000000 |
| 7" | 1/2" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 60 (Rough) | I | 0000000 | 00000 |
| 7" | 1/2" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 80 (Smooth) | I | 0000000 | 00000 |
| 7" | 1/2" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 100 (Smooth) | I | 0000000 | 00000 |
| 7" | 1/2" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 120 (Smooth) | I | 0000000 | 00000 |
| 7" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 60 (Rough) | I | 0000000 | 000000 |
| 8" | 1/2" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 100 (Smooth) | I | 0000000 | 000000 |
| 8" | 3/4" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 60 (Rough) | J | 0000000 | 000000 |
| 8" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 60 (Rough) | J | 0000000 | 000000 |
| 8" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 80 (Smooth) | I | 0000000 | 000000 |
| 8" | 1" | 1 1/4" | 3,600 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | 100 (Smooth) | I | 0000000 | 000000 |
| 10" | 2" | 2" | 2,100 | Silicon Carbide | Vitrified Clay | Type 2 | Cylinder | 60 (Rough) | H | 0000000 | 000000 |
Toolroom Grinding Wheels for Carbide, Ceramics, and Glass
A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Diamond Wd. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Abrasive Surface | Color | Choose a Grit (Surface Texture) | Each | |
For Carbide, Ceramics, Glass | |||||||||||||
Unthreaded Arbor Hole | |||||||||||||
| 3 3/4" | 1 1/2" | 1/16" | 1 1/4" | 9,675 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 0000000 | |
| 3 3/4" | 1 1/2" | 1/8" | 1 1/4" | 9,675 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 000000 | |
| 4" | 1/8" | 1/8" | 1 1/4" | 9,050 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 4" | 1/4" | 1/8" | 1 1/4" | 9,050 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 5" | 1 3/4" | 1/8" | 1 1/4" | 7,250 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 000000 | |
| 6" | 1/8" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 1/4" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 3/8" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 1/2" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 3/4" | 1/16" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 6 | Straight Cup | Partial Face | Silver | 00000000 | 000000 | |
| 6" | 3/4" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 6 | Straight Cup | Partial Face | Silver | 00000000 | 000000 | |
| 7" | 1/8" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 1/4" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 3/8" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 1/2" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
Long-Life Grinding Bits for Nonmetals
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Abrasive Material | O'all Lg. | Grit (Surface Texture) | Each | ||
For Carbide, Ceramics, Glass | |||||||||
1/8" Shank Dia. | |||||||||
| 1 | 0.03" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 0000000 | 000000 |
| 1 | 0.03" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.04" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 0000000 | 00000 |
| 1 | 0.04" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.05" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.05" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.06" | 0.12" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.06" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.07" | 0.12" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.08" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.08" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.09" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.1" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.11" | 0.16" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.12" | 0.16" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.14" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.16" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.16" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.19" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.03" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.06" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.13" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 1/4" | 100,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.25" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 1/2" | 100,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.31" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.375" | 1/8" | 40,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.375" | 1/4" | 90,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.375" | 3/8" | 90,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 2 | 0.06" | 1/4" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.13" | 1/4" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.25" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.31" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.14" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 4 | 0.06" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 4 | 0.08" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 4 | 0.11" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.156" | 5/8" | 40,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 00000000 | 00000 |
| 5 | 0.16" | 0.23" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.17" | 0.14" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.19" | 0.38" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.06" | 0.06" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.09" | 0.09" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.13" | 0.13" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.19" | 0.19" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.25" | 1/4" | 46,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.38" | 0.38" | 46,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 7 | 0.031" | 1/32" | 40,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 00000000 | 00000 |
1/4" Shank Dia. | |||||||||
| 1 | 0.06" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.09" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.19" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.2" | 0.24" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.24" | 0.28" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.26" | 0.28" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.31" | 0.31" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.32" | 0.32" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.34" | 0.32" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.38" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.39" | 0.39" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.5" | 1/4" | 70,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.5" | 0.31" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.5" | 1/2" | 70,000 | Cylindrical | Diamond | 2" | 150 (Smooth) Silver | 00000000 | 00000 |
| 1 | 0.59" | 0.39" | 20,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.73" | 0.39" | 20,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.38" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.5" | 0.31" | 30,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.5" | 1/2" | 30,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.19" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.25" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.5" | 0.2" | 30,000 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
For Carbide, Ceramics, Glass, Grout | |||||||||
1/8" Shank Dia. | |||||||||
| 4 | 0.094" | 5/16" | 40,000 | Barrel | Diamond | 2 1/2" | 120 (Smooth) Silver | 00000000 | 00000 |
1/4" Shank Dia. | |||||||||
| 9 | 0.094" | 5/16" | 40,000 | Barrel | Diamond | 2 1/2" | 120 (Smooth) Silver | 00000000 | 00000 |
| 9 | 0.188" | 5/16" | 40,000 | Barrel | Diamond | 2 1/2" | 120 (Smooth) Silver | 00000000 | 00000 |
Miniature Long-Life Grinding Bits for Nonmetals
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs. To extend the life of these bits and improve their finish, use a water- or oil-soluble mist or coolant. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
A keyless chuck (sold separately) connects these bits to rotary tools that accept a 1/8" shank diameter.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Carbide, Ceramics, Composites, Fiberglass, Glass, Plastic, Rubber | |||||||||
3/32" Shank Dia. | |||||||||
| 1 | 0.047" | 0.059" | 75,000 | Inverted Cone | Diamond | 1 3/4" | 120 (Smooth) Silver | 0000000 | 000000 |
| 1 | 0.071" | 0.059" | 55,000 | Inverted Cone | Diamond | 1 3/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.374" | 0.16" | 25,000 | Inverted Cone | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.051" | 0.051" | 70,000 | Ball | Diamond | 1 3/4" | 100 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.075" | 0.075" | 45,000 | Ball | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.091" | 0.091" | 40,000 | Ball | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.138" | 0.138" | 25,000 | Ball | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.169" | 0.169" | 25,000 | Ball | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.094" | 0.157" | 25,000 | Cylindrical | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.181" | 0.157" | 25,000 | Cylindrical | Diamond | 1 5/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 4 | 0.098" | 0.393" | 25,000 | Taper | Diamond | 1 3/8" | 100 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.123" | 0.354" | 25,000 | Taper | Diamond | 1 3/8" | 100 (Smooth) Silver | 0000000 | 00000 |
Swap out accessories on your Dremel without tools.
| For Shank Dia. | Manufacturer Model Number | For Manufacturer Model Number | Mounting Hole Thread Size  | Body Material | Jaw Material | Each | |
| 1/32"-1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 0000000 | 00000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
4" Dia. | |||||||||
| 0.035" | 1 1/4" | 15,275 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
6" Dia. | |||||||||
| 0.035" | 1 1/4" | 10,175 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
7" Dia. | |||||||||
| 0.04" | 1 1/4" | 8,725 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
8" Dia. | |||||||||
| 0.04" | 1 1/4" | 7,625 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
10" Dia. | |||||||||
| 0.05" | 1 1/4" | 6,100 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
Multipurpose Portable Cutoff Saw Wheels
Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Shape | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
12" Dia. | |||||||||||
| 1/8" | 20 mm | Round | 6,400 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide Blend | Fiberglass Mesh | Aluminum, Brass, Carbide, Concrete, Copper, Hastelloy, Inconel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone | 30 | 0000000 | 000000 |
14" Dia. | |||||||||||
| 1/8" | 20 mm | Round | 5,500 | Type 1 | Straight | Aluminum Oxide/Silicon Carbide Blend | Fiberglass Mesh | Aluminum, Brass, Carbide, Concrete, Copper, Hastelloy, Inconel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone | 30 | 0000000 | 00000 |